Electronic Boards

Embedded Module features Intel i815E chipset.
Electronic Boards

Embedded Module features Intel i815E chipset.

Model ETX-P3T provides complete PC functionality in component that plugs into application-specific carrier board. Power management is achieved using ACPI and APM 1.2, allowing fanless cooling. Module supports Intel 82815 chipset with integrated Graphics Core, 2 IDE ports with support for ATA 33, 4 USB 2.0 ports, up to 512 Mbytes SDRAM, 10/100 Mbit Base-T Ethernet, LVDS up to SXGA 1,280 x 1,024,...

Read More »
Motion Control Cards feature max pulse output of 4 Mpps.
Electronic Boards

Motion Control Cards feature max pulse output of 4 Mpps.

Models PCI-1241/1242/1261 provide 4- and 6-axis of servo and stepper motor control. They support 2D and 3D interpolation for linear, circular, and arc motion, as well as T- and S-curve acceleration. All 3 cards provide precise position and rotation control, as each axis is equipped with 32-bit logical position counter that counts axis pulse output number; and 32-bit real position counter that...

Read More »
PCI DI/DO Cards offer 128 digital input/output channels.
Electronic Boards

PCI DI/DO Cards offer 128 digital input/output channels.

Models PCI-1758UDI and PCI-1758UDO are digital input/output cards with universal PCI bus, BoardID(TM) switch, and high-voltage isolation. PCI-1758UDI has interrupt function for each of 128 digital input channels and digital filter function, which provides de-bouncing for switches and relays. PCI-1758UDO features watchdog timer and user-configurable power-up states. Both cards support systems with...

Read More »
Serial Communication Modules have 8 asynchronous ports.
Electronic Boards

Serial Communication Modules have 8 asynchronous ports.

Models PMC520 (octal 232) and PMC521 (octal 422/485) provide 8 asynchronous serial communication ports from a single PMC carrier slot. Each port is equipped with 64 byte transmit and receive FIFO buffers that minimize CPU interactions, and Baud rate is programmable with data rates of up to 250 Kbps. RTS and CTS handshake support are provided for interface with modems. Other functions include...

Read More »
Understanding Water Hammer
Sponsored

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Read More »
Dual Type III Mini-PCI Adapter works with PC/104-PLUS bus.
Electronic Boards

Dual Type III Mini-PCI Adapter works with PC/104-PLUS bus.

Model 4167 allows use of 2 mini-PCI cards, such as IEEE 802.11 wireless LAN cards, in PC/104-PLUS (PCI-only) system. It uses PCI bus bridge, so only one PC/104-PLUS slot is required. PCI bridge also isolates mini-PCI cards from system, allowing mini-PCI cards to be used in systems with 5 V busses. On-card jumpers are used to select which PC104-PLUS slot the adapter occupies, and status LEDs are...

Read More »
Telecom Blade has 1 GHz processor and PICMG 2.16 interface.
Electronic Boards

Telecom Blade has 1 GHz processor and PICMG 2.16 interface.

Katana(TM)752i is equipped with PowerPCÂ-® 750GX processor and Marvell Discovery III system controller. Configurable cPSB blade features 2 PTMC sites, 4 Gigabit Ethernet channels, multi-level cache, and CTBus/H.110 interconnect that enables product to acquire and process both TDM and packet data. PTMC sites support 32-bit PCI data transfers at 33 or 66 MHz and feature dedicated CTBus and RMII...

Read More »
Microcontroller Board features radio link.
Electronic Boards

Microcontroller Board features radio link.

Model WMB-USA uses Atmega8535-16 chip, running at 16 MHz and achieving almost 16 MIPS. Built-in serial RF link has variable power from 1-10 mW with selectable data speeds. Suited for wireless control, mobile robots, and data-logging applications, board accepts input voltage from 6-35 V with polarity inversion protection, and includes four 8-bit I/O ports and one serial port. It measures 84 x 70 x...

Read More »
Image Acquisition Board is compliant with 64-bit PCI bus.
Electronic Boards

Image Acquisition Board is compliant with 64-bit PCI bus.

Model X64-LVDS is compatible with 8, 10, and 12-bit LVDS and RS-422 digital area or linescan cameras and supports up to 8 taps of 8 bits each. On-the-fly tap correction expedites image processing and analysis. Featuring image acquisition rates up to 600 Mb/s and image transfer to host memory at 528 Mb/s, Model X64-LVDS provides up to 32 Mb of local buffer memory. It supports fixed and variable...

Read More »
Multifunction Cards deliver 3 MHz performance.
Electronic Boards

Multifunction Cards deliver 3 MHz performance.

PowerDAQ Series PD2-MF-3M/12 offers aggregate throughput rates of 3 MHz on 16 or 64 analog input channels with 12-bit resolution. Units include instrumentation amplifiers for either high- or low-level signals. Standard onboard FIFO is 16 k samples with options for FIFO buffers of 32 or 64 k samples. Cards feature dual 12-bit analog outputs each running at 200 k samples/sec, 16 digital inputs, 16...

Read More »
USB Card supports signaling up to 480 Mbps.
Electronic Boards

USB Card supports signaling up to 480 Mbps.

Four-port Model PPM-USB2 provides direct Peripheral Component Interconnect to PC/104-Plus bus. It includes 2 OHCI controller cores for full-/low-speed signaling and one EHCI host controller for high-speed signaling. Root hub with 4 downstream facing ports is shared by OHCI and EHCI controller cores. All downstream facing ports can handle 480 Mbps high-speed, 12 Mbps full-speed, and 1.5 Mbps...

Read More »

All Topics