Servo Drive Expansion Board expands analog/digital control.
Available for Pluto series miniature servo drives, starter kit input/output expansion board allows accelerated evaluation of motion control capabilities with direct access to I/O signals. Module fits on top of standard Pluto servo drive and only requires connection with flat cable (included). Replicating I/O connectivity, module addsÃ- two potentiometer interfaces (for analog signals), 4...
Read More »Gesture Sensor Board streamlines touchless remote control.
Used to add touchless swipe right, swipe left, tap, and push in and out- control to any device, gesture control sensor board consists of VCNL4020 integrated digital proximity and ambient light sensor and 2 VSMF2890RGX01 IR diodes mounted on either side of sensor. Radiant intensity of 80 mW/sr typ at 200 mA allows for detection of hand gestures up to 25 cm above sensor board, and...
Read More »Gesture Sensor Board streamlines touchless remote control.
Used to add touchless swipe right, swipe left, tap, and push in and outÃ- control to any device, gesture control sensor board consists ofÃÂ VCNL4020 integrated digital proximity and ambient light sensor andÃÂ 2 VSMF2890RGX01ÃÂ IR diodes mounted on either side of sensor. Radiant intensity of 80 mW/sr typ at 200 mA allows for detection of hand gestures up to 25 cm above sensor...
Read More »XMC/PMC Module features 12 CAN bus channels.
Available as conduction- or air-cooled, XPort9200 provides 12 isolated CAN bus 2.0A and 2.0B-compliant channels that support speeds up to 1 Mbps. When configured as XMC,- unit supports VITA 42.3-compliant x1 PCIe interface through XMC P15 connector and routes all 12 CAN bus channels to XMC P16 connector. When configured as PMC, XPort9200 supports 32-bit PCI interface through PMC P11 and P12...
Read More »3-axis vs. 5-axis
Our latest Ebook breaks down the difference between 3-axis and 5-axis CMM measurement methods.
Read More »XMC/PMC Module features 12 CAN bus channels.
Available as conduction- or air-cooled, XPort9200 provides 12 isolated CAN bus 2.0A and 2.0B-compliant channels that support speeds up to 1 Mbps. When configured as XMC,Ã- unit supports VITA 42.3-compliant x1 PCIe interface through XMC P15 connector and routes all 12 CAN bus channels to XMC P16 connector. When configured as PMC, XPort9200 supports 32-bit PCI interface through PMC P11 and P12...
Read More »Embedded Mini-ITX Board supports up to 4 independent HD displays.
Based on AMD-® 2.1/2.6 GHz R-260H Dual-core APU or 2.0/2.8 GHz R-460L Quad-core APU, EMB-A70M offers 4 HDMI ports directly off its rear coastline and parallel compute capabilities. Features include dedicated graphics memory controller, optimized 128-bit engine, and full DirectX®11 support. Connectivity is fostered via several interfaces: one PCIe(x4), one full size miniPCIe with SIM...
Read More »Embedded Mini-ITX Board supports up to 4 independent HD displays.
Based on AMDÃ-® 2.1/2.6 GHz R-260H Dual-core APUàor 2.0/2.8 GHz R-460L Quad-core APU, EMB-A70Màoffers 4 HDMI ports directly off its rear coastline and parallel compute capabilities. Features include dedicated graphics memory controller, optimized 128-bit engine, and full DirectXî11 support. Connectivity is fostered via several interfaces: one PCIe(x4), one full size...
Read More »I/O Interface Board complements Motorola RTU I/O module.
Expanding capabilities of Motorola ACE3600 RTU Mixed I/O Module, Model SIB-V245/V453 Mixed I/O Interface Board provides 16 discrete inputs which can be separately set to monitor 10–30 Vac/Vdc or 120 Vac; 4 discrete outputs as Form C pluggable relays; and 4 bipolar analog inputs, which provide test points that allow monitoring of 4 current signal inputs without breaking current loop. Transient...
Read More »I/O Interface Board complements Motorola RTU I/O module.
Expanding capabilities of Motorola ACE3600 RTU Mixed I/O Module, Model SIB-V245/V453 Mixed I/O Interface Board provides 16 discrete inputs which can be separately set to monitor 10–30 Vac/Vdc or 120 Vac; 4 discrete outputs as Form C pluggable relays; and 4 bipolar analog inputs, which provide test points that allow monitoring of 4 current signal inputs without breaking current loop. Transient...
Read More »Hardware-Accelerated Compression works with Apache Hadoop.
AltraHD enables all applications in Apache™ Hadoop-® stack to be transparently compressed using hardware acceleration, removing I/O bottlenecks and optimizing storage capacity. Leveraging software technology and hardware compression accelerators, solution integrates seamlessly into stack and transparently compresses all files that are using Hadoop Distributed File System (HDFS). Features...
Read More »How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »