New AMC560 FPGA Carrier with Dual FMC+ VITA 57.4 Interfaces
Compliant to AMC.1, AMC.2, AMC.3 and AMC.4 specifications. Unit has a Xilinx UltraScale+ XCZU19EG MPSoC FPGA that provides 1,968 DSP Slices and 1,143k logic cells. Available with an interface to a single DDR4 memory channel (64-bit wide with ECC) which allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.
Read More »
New Backpack Boards Allow Users to Communicate to TFT/IPS LCDs by Means of HDMI/VGA
Low-profile boards can be tape attached to the back of LCDs or can be mounted by hardware (through-hole stand-offs). Touch panel controller boards make both resistive and PCAP touch panels USB-HID ready, for a true plug and play solution. Ideal for SBC/SOM mainboards with HDMI/VGA input.
Read More »
New Graphics and Video Capture Board Offers High Performance Input and Output
NVP2102 is designed for graphics and video generation, supporting four 3G-SDI inputs, capable of 1080p60 and two 3G-SDI outputs. Developed for deployment in harsh and cramped conditions typical of battlefield platforms. Applications include situational awareness, signals intelligence, ISR and radar.
Read More »
New NVP2000 Supports H.265/H.264 Encode/Decode
Operates at temperatures of -40°C to +85°C. Designed for graphics generation/output, supporting three DisplayPort 1.4 ports capable of 4K resolution at 60Hz. Deliver gains in SIGINT, radar and video or graphics processing applications.
Read More »
How to Select a Thermal Fluid Heater for Your Process
Do you know the important factors you should consider when comparing different types of thermal fluid heaters?
Read More »
New AcroPack Module Carrier from Acromag is Based on PCI Express Mini Card Standard
Available for analog I/O, digital I/O, serial communication, FPGA, MIL-STD-1553 and CAN bus. Suitable for use in military, aerospace, oilfield and industrial applications where size, weight, and power optimization are required. Applications data acquisition and control, test and measurement, simulation, and communication operations.
Read More »
New PCIe/104 Carrier Modules Designed to Support up to Four PCI Express Mini Cards
Allow users to install PCI Express Mini Cards (mPCIe) into new and existing PCIe/104 embedded systems. Supports half and full-size mPCIe cards, for use in Type 1 or Type 2 PCIe/104 stack. Compatible with top or bottom stacking SBCs for added flexibility.
Read More »
Latest WUX-7x00U Embedded Board is Designed for Communication and IoT Applications
Available in 101.6 x 101.6mm footprint with multiple storage interfaces including 1x SATA III port and 1x M.2 Key M for SSD. Features 3x USB 3.0 and 1x USB3.0 Type-C ports and integrates with 1x M.2 Key E for wireless module connectivity. Embedded with Intel 620 HD graphics engine that support triple display with onboard 1x DisplayPort and 2x HDMI connector.
Read More »
AAEON's New AI Core X Computing Board Provides Up to 105 FPS Operations
Embedded with Intel® Movidius™ Myriad™ X VPU that can perform over 1 trillion floating point operations per second. Allows drones to process real time, alerts conservationists of poachers or help lifeguards to keep beaches safe from sharks. Built on mPCIe form factor and the Myriad™ X processes video and performs facial recognition in real-time.
Read More »
QuickLogic Presents EOS S3AI Platform with SensiML Analytics Toolkit
Designed for endpoint artificial intelligence and machine learning applications such as predictive maintenance, structural health monitoring and context awareness. Enables OEM to reduce system and operating costs while eliminating the need for continuous high-bandwidth connectivity. Offers the required hardware blocks for enabling low power AI at IoT endpoint.
Read More »
Portwell Releases Latest WADE-8211-Q370 Embedded System Boards for Limited-Space Applications
The WADE-8211-Q370 Embedded System Boards are designed for applications such as industrial automation, communications appliances and automatic test equipment. The boards are embedded with Intel Core i3/i5/i7 processor platform and supports 2x DDR4 SODIMM up to 32GB 2133/1866, 4x SATAIII port; 1x PCIe x16 Gen 3 port. The boards offer capability of multiple system peripheral control and wireless...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
