Digital Amplifier turns millivolt tension signal into usable one.
Used to multiply- millivolt tension signal to- usable 0–10 Vdc and 4–20 mAdc analog output,- MAGPOWR Digital Load Cell Amplifier (DLCA) offers pushbutton for re-zeroing, programmable filtering of each output, and 3- pushbuttons for setup and calibration. Other features include weightless load cell calibration, configurable alarm output, and automatic load cell diagnostics and fault...
Read More »
Ultra Low Noise GaAs Amplifiers operate up to 16 and 17 GHz.
Available as bare die for hybrid assemblies, CMD167 ultra low noise GaAs MMIC amplifier operates from 10–17 GHz. Supplied in leadless 3 x 3 mm plastic SMT package, CMD167P3 operates from 8–16 GHz. Both deliver >15 dB gain, with output 1 dB compression point of +11 dBm and noise figure of 1.8 dB at 14 GHz, and feature 50 Ω matched designs that eliminate need for external DC blocks and RF port...
Read More »
TTL Amplifier meets MIL-STD-883 standard.
Featuring customizable design, 10 W Model MSH-4627908-TTL is optimized for operating frequency range of 5.2–5.8 GHz with 28 dB min of gain and 6 A max fully matched to 50 Ω. Unit provides fast blanking and is manufactured in compliance with AS9100. Available with mounting plate, amplifier is suited for test systems as well as aerospace and defense applications.
Read More »
Low-Noise MMIC Amplifiers meet MIL requirements.
Utilizing E-PHEMT technology, CMA Series is tested to meet MIL requirements for gross leak, fine leak, thermal shock, vibration, acceleration, mechanical shock, and HTOL. Units are housed in 3 x 3 x 1.4 mm ceramic cases that are hermetically sealed and nitrogen filled. Offering thermal performance of -55 to +105-
Read More »Are Starrco Modular Systems Right for Your Application?
Prefabricated construction is a type of construction method that involves manufacturing building components off-site or in a controlled environment
Read More »DSD DAC/Headphone Amplifier offers 256X DSD upsampling mode.
Equipped with Voltikus power supply and aluminum remote control, Zodiac Platinum features 256X unsampling mode, where DSD64 and DSD128 are unsampled to DSD256. Unit includes custom-built USB chip capable of carrying DSD128 and up 24-bit, 384 kHz PCM files, as well as- wide range of connectivity options, including AES/EBU and S/PDIF I/O, TOSLINK inputs, set of balanced and unbalanced analog outs,...
Read More »Solid-State Power Amplifiers suit X-band applications.
As traveling wave tube replacement, Model- AGW-110-4760 provides minimum CW output power of 50 W across entire 7.0–11.0 GHz frequency range.- Amplifier features- 60 dB of gain and 47 dBm of CW power saturation.- Model AGW-110-5056-P, providing up to 100 W of pulse power at selected 1 GHz segments of 7.0–11.0 GHz frequency band, features 56 dB of gain and 50 dBm of pulsed saturated power....
Read More »RFMD's Envelope Tracking Power Amplifiers and Antenna Control Solutions Enhance Power Efficiency of New Marquee Android Smartphone
GREENSBORO, N.C. - RFMD, Inc. (Nasdaq:RFMD), a global leader in the design and manufacture of high-performance radio frequency solutions, today announced that the newest flagship Android smartphone incorporates its envelope tracking (ET) power amplifiers, antenna switch module, diversity switches and antenna tuner. This fifth generation smartphone from a leading Korea-based manufacturer is the...
Read More »
Fiber Amplifier supports IO-Link communication.
Able to achieve point-to-point communication- for complete configuration/monitoring, DF-G1 increases sensing capabilities for diverse applications. Along with intuitive interface, dual display, and digital readouts, features include mechanical design with optimized fiber clamp that facilitates use while also promoting stable sensing performance, thermally stable electronics, cross-talk avoidance...
Read More »
Broadband RF Gain Blocks offer up to 24 dB gain, 40 dBm OIP3.
Analog Devices, Inc., ADL5544/ADL5545/ADL5610/ADL5611 single-ended RF/IF gain block amplifiers operate from 30 MHz to 6 GHz and offer up to 24 dB gain and 40 dBm third-order intercept point (OIP3). Stable over frequency, temperature, and power supply, products integrate bias control circuits, are fabricated on InGaP HBT process, and come in SOT-89 packages. Features include ESD ratings of -
Read More »Power Amplifiers feature ultra-wideband capability.
Designed using broadband MMIC technology, GT-1000B option 06 and GT-1050B/GT-1051B Solid-State Microwave Power Amplifiers cover 100 MHz to 20 GHz and 10 MHz/2 GHz to 50 GHz, respectively. Model- GT-1000B option 06 provides 5 W from 100 MHz to 18 GHz, while Models- GT-1050B/GT-1051B deliver -½ W (+27 dBm) at 40 GHz and -¼- W (+24 dBm) at 50 GHz. With -
Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.
Read More »
