Electronic Amplifiers

Electronic Amplifiers

Wideband Inline Amplifier covers full GNSS spectrum from 1-2 GHz.

Available with TNC, N-Type, or SMA connectors, TW125B amplifies GNSS frequency signals from GPS L5 (1,164 MHz) to GLONASS G1 (1,610 MHz) and beyond. This 28 dB gain, waterproofÂ- amplifier, which provides for extended cable runs from antenna to receiver without degradation of system sensitivity, passes DC supply to antenna to negate additional hardware (bias-T, power cable, power...

Read More »
Broadband Differential Input RF Amplifier simplifies designs.
Electronic Amplifiers

Broadband Differential Input RF Amplifier simplifies designs.

Delivering 600–3,000 MHz bandwidth, F1423 simplifies RF DAC and integrated transceiver-based designs by integrating amplifier and balun in one 4 x 4 mm, 24-QFN package. Differential input aligns with standard differential Tx outputs of RF DACs and integrated transceivers. Along withÂ- 13 dB typ gain, 20 dB CMRR, and linearity of 42 dBm OIP3 @ 2,000 MHz, specifications include 50 Ω...

Read More »
Audio Op-Amp enhances professional audio equipment performance.
Electronic Amplifiers

Audio Op-Amp enhances professional audio equipment performance.

Available in 3 x 3 mm DFN package, Burr-Brown™ OPA1622 deliversÂ- up to 150 mW of output power and THD of -135 dB @ 10 mW. Quiescent current consumption is 2.6 mA/channel, and linear output current is 80 mARMS. Conserving board space without compromising performance, power-supply rejection ratio (PSRR) of -97/-123 dB @ 20 kHz enables low distortion from switching...

Read More »
Discrete Fiber Amplifier offers long-range sensing capability.
Electronic Amplifiers

Discrete Fiber Amplifier offers long-range sensing capability.

Used with plastic and glass fiber optic assemblies, DF-G3 can sense more than 10 ft with opposed mode fibers or more than 3 ft with diffuse mode fibers. Power increases detection reliability for dark targets at long range and enhances detection sensitivity when using specialty fiber assemblies for large area and small part detection applications. Available withÂ- 1 or 2 dual discrete...

Read More »
Electronic Amplifiers

Ka-band Block Upconverter supports satellite communications.

Rated at 25 Watts, ATOM Ka-band Block Upconverter and Solid State Power AmplifierÂ- is software switchable between commercial and military Ka-band frequency 29–30 and 30–31 GHz, including WGS compliance. Custom variants are available from 27–32 GHz. Offered in 1:1 redundant configurations, product is suited for applications where size and weight are of concern, including airborne and...

Read More »
GaN MMIC Power Amplifier suits pulsed radar applications.
Electronic Amplifiers

GaN MMIC Power Amplifier suits pulsed radar applications.

Rated for 25 W and 8.5–11.0 GHz operation, Model CMPA801B025 features 37 W typical POUT, 16 dB power gain, 35% typical power added efficiency, andÂ- less than 0.1 dB power droop. X-Band GaN MMIC Power Amplifier is internally matched to 50 Ω, and is supplied in both 10-lead metal/ceramic flanged package, and smaller form factor pill package for optimal electrical and...

Read More »
Electronic Amplifiers

Fiber Amplifier works with hundreds of fiber assemblies.

WithÂ- high-power LED driving light through core fibers, DF-G3 allows sensing up to 3,600 mm. Single and dual discrete as well as analog output options are available, and sensing range is 3,600 mm max. Dual digital displays show signal level and threshold values, and sensing output is compatible with PLCs, HMIs, and other machine control systems. Compatible with multiple fiber lenses...

Read More »
Electronic Amplifiers

Solid-State Microwave Pulse PA has 1.0-2.0 GHz frequency range.

Able to supply 4 kW pulse power up to 10% duty cycle with max pulse width of 100 Â-µsec, S21-4KWP-2KWP FLEX can also be configured into 2 separate 2 kW pulse amplifiers. IEEE-488 and RS232 interfaces come standard, and UI features backlit screen that shows forward/reverse power indication, system status, and self-diagnostic information. Power indication is shown in pulse, and...

Read More »
Isolation Amplifiers utilize delta-sigma AD converter.
Electronic Amplifiers

Isolation Amplifiers utilize delta-sigma AD converter.

Able to detect small electric current and voltage fluctuations, Models TLP7820 and TLP7920 are suitable for use in inverters, servo amplifiers, robots, and power supplies. Delta-sigma ADC at input side enables linearity of 0.02% (typ.) @ NL (200) for analog output products and 3LSB (typ.) @ INL for digital output products. With Common-Mode Transient Immunity of 20 kV/Â-µs, optical coupled...

Read More »
Balanced LNA delivers high gain and low-noise.
Electronic Amplifiers

Balanced LNA delivers high gain and low-noise.

Suited for EW and communication systems with space constraints and low power consumption requirements, 9–18 GHz CMD223 has 50 Ω matched design that eliminates need for external DC blocks and RF port matching. Full passivation promotes reliability and provides moisture protection. At 13.5 GHz,Â- this balanced low-noise amplifier (LNA) delivers >22 dB of gain with corresponding...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics