Electronic Amplifiers

Electronic Amplifiers

Power Amplifiers optimize speaker performance.

Rated at 400 and 900 W, Evolution 403 and 900 are 3-channel and monaural amplifiers with Current Audio Signal Transmission circuitry and current gain topologies that allow signal to remain in current domain from input to output. This avoids unnecessary current to voltage conversions that add distortion and limit bandwidth. Both utilize 6,000 VA power supply that makes use of electrical and...

Read More »
Electronic Amplifiers

Video Amplifier supports 1080p high definition format.

Available in 3 x 3 mm QFN package, Model LT6559 triple amplifier features 150 MHz 0.1 dB flatness bandwidth, 800 V/Â-µs slew rate, and wide output swing of 1.15-3.85 V on single 5 V supply. Unit includes separate enable pins for each channel. When enabled, amplifier draws 3.9 mA and when disabled, current consumption drops to 0.1 Â-µA. Applications include video-playback equipment, KVM...

Read More »
Electronic Amplifiers

Buffer Repeaters offer low-jitter and on-chip termination.

With only 14 psec jitter at 1.5 Gbps data rate and offering 15 kV ESD protection, Models DS15BR400 and DS15BR401 are suited for designing LVDS multi-cards or multi-boxes. Offered in 32-pin LLPÂ-® and 48-pin TQFP packages, buffer-repeaters operate from 0-2.0 Gbps and drive up to 4 LVDS clock/data channels over common backplanes or cable configurations. Differential input range interfaces to...

Read More »
Electronic Amplifiers

Audio Op Amp drops distortion rate to 0.00003%.

Suited for high-end professional audio applications, Model LM4562 combines 6 MHz unity-gain bandwidth operational amplifier with stereo audio power amplifier. Op amp features low input noise density of 2.7 nV/√Hz at 217 Hz, 1/f noise corner of 60 Hz, and 600 W output drive. Available in 8-lead SOIC dual in-line package, Model LM4562 has slew rate of 20 V/Â-µs, 56 MHz gain bandwidth, and...

Read More »
Driver Amplifier is used in wireless applications.
Electronic Amplifiers

Driver Amplifier is used in wireless applications.

Utilized in WiMAX, WiBro, and UMTS/WCDMA base stations, Model MAAMSS0071 single-stage driver amplifier is fabricated using GaAs HBT process. Product features gain blocks with output of P1dB levels of +26 dBm and gain of 16 dB at 2,140 MHz. Housed in lead-free, RoHS compliant SOT-89 plastic package, amplifier offers 500-2,500 MHz bandwidth, which can be optimized for specific frequency range with...

Read More »
Power Amplifier suits 802.16 WiMAX Base Station applications.
Electronic Amplifiers

Power Amplifier suits 802.16 WiMAX Base Station applications.

Model ZPA3436-5W amplifier operates over 3.4-3.6 GHz band with typical gain of 46 dB and 37 dBm OFDM output power for 64 QAM, 3/4 Coding, 3.5 MHz channel bandwidth, and 256 carriers. Biased at 28 V, high linearity power amplifier achieves EVM performance of 2% at 37 dBm linear output power, and draws 3.5 A dc current. Design is lead free and SMA connectorized package measures 9 x 4 x 1.5 in....

Read More »
Federal Signal SelecTone-® Meets New UL Class- T-® Requirements
Electronic Amplifiers

Federal Signal SelecTone-® Meets New UL Class- T-® Requirements

UNIVERSITY PARK, IL, September 22, 2006 - Federal Signal Electrical Products SelecTone-® systems cover the full range of industrial communications applications; start and dismissal, emergency evacuations, process control signaling, voice messages and public address. The Next Generation SelecTone product line now utilizes Class -T-® technology. These unique products will provide the same...

Read More »
Electronic Amplifiers

EDFA Optical Performance Monitor fits in tight spaces.

PureGain(TM) Optical Amplifier module combines Erbium Doped Fiber Amplification with Optical Performance Monitoring (EDFA-OPM) capabilities. Providing automatic and remote EDFA control in single module, integrated product offers self-compensating solution that maintains backwards-compatible electrical and mechanical configurations to promote future network upgrades. Uses include next-generation...

Read More »
Electronic Amplifiers

TWT Amplifier operates in 4.2-18 GHz frequency band.

Delivering 40 W of power, Model 40T4G18 Traveling Wave Tube Amplifier (TWT) is designed for applications where low harmonic content is required in sub-band ranges and where wide instantaneous bandwidth, high gain, and moderate power output are required. Features include built-in IEEE-4888 (GPIB) interface, 0 dBm input, VSWR protection, gain control, RF output sample port, auto sleep, plus...

Read More »
Stereo Audio Amplifier features transparent mute function.
Electronic Amplifiers

Stereo Audio Amplifier features transparent mute function.

Available in 3 grades, LM4702 has output-power stage design that is scalable over power levels and applications from 50 W AV receivers to 500 W amplifiers. This 200 V stereo driver has integrated power amplifier driver and is designed to drive high-power discrete transistors, or Darlington pairs, in systems delivering 25-300 W per channel. Monolithic, output stage driver has integral thermal...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics