New Compounds Products

Repair and Patching Compound is offered in caulking tubes.

Single-component, aluminum-loaded Lab-metal hardens by exposure to air into sandable, grindable, tappable metal. Dent filler withstands temperatures to 350-°F or one-time exposures to 425-°F. Ready-to-use metal putty is also available as Hi-Temp Lab-metal, which withstands temperatures to 1000-°F. Packaged in 20 oz caulking tubes, product seals seams and other specialized applications.

Mold Release/Conditioner has zero VOC content.

Non-carcinogenic, odorless SafeSlick(TM) blended boron compound is non-toxic and non-flammable and complies with SPI's environmental, health, and safety policy. Used as release agent in high-temperature/pressure applications, it is non-silicone, non-oil, non-conductive, and non-reactive. Product can applied via spray system, brush, wipe, or sponge, drying to 2-10 micron, semi-permanent layer. As...

Molding/Potting Compound is used to produce burner nozzles.

Thermally conductive, silicon carbide-based Ceramacast(TM) 673N can be used in applications with temperatures to 2,450Ã-

Flame Retardant Epoxy is UL-94V-0 approved.

Rigid cure epoxy, EP-211FRHTC (Flame Retardant High Thermal Conductivity), offers thermal conductivity and flame retardancy. When cured at room temperature, it has service temperature of up to 130Ã-

Access Hardware: Medical Solutions

This guide will provide a closer look at solutions for medical equipment and devices

Epoxy Compound works in bedding and casting applications.

Clear, flexible TRA-BOND 3010 bonds to ceramics, glass, most metals, and many plastics. It exhibits near-zero shrinkage and is resistant to water, weather, gases and vapors, petroleum products, mild acids and alkalis, salt solutions, and other organic compounds. Compound is suitable for aerospace and electronics applications.

Safe Seal Materials protect drinking water systems.

Sealing materials meet NSF Standard 61 protecting potable water from contaminants that leach or migrate into water from traditional components. Organic materials include 10 EPDM compounds, 7 thermoplastic elastomers, and 2 nitrile compounds that can be formed into faucet and shower gaskets, water filter gaskets, valve seals and seats, pipe coupling seals, and diaphragms and O-rings used in pumps,...

Custom Compounds produce speckled parts.

Speckled Dyneon(TM) Custom PTFE Compounds are produced by mixing PTFE with inorganic or organic fillers, which improve wear and abrasion resistance, reduce deformation under load, and add color. Compounds are offered in free-flow and pre-sintered grades. Speckled parts feature temperature resistance up to 500Ã-

Composite blocks engine heat and noise.

TUFCOTEÃ-® RM-10-75 3-layer composite works as noise barrier and heat reflector for engine-driven vehicles and equipment. It has 3/4 in. urethane foam decoupler, lead-free vinyl barrier, and top facing of aluminized, scrim-reinforced polyester. With barrier toward noise and heat source, barrier contains noise, and shiny reflective facing reduces heat transfer. Scrim reinforcement limits...

Epoxy Compound features one to one mixing ratio.

Type 20-3650 electronic grade epoxy potting, casting, and encapsulating system exhibits excellent physical, thermal, and electrical insulation properties. Tensile strength is 11,000 psi and compressive strength is 15,500 psi. Compound is DOT non-hazardous, easy to mix, and will cure at room temperature or with mild heat. Operating temperature range is -60 to +150Ã-

Injection Molding Compounds resist impacts, chemicals, and fires.

Fire rated Kydex(R) compounds include 10 injection molding and 20 extrusion grades carrying fire ratings of UL Std 94 V-0/5V, FAR 25.853 (a) and (d), ASTM E-162, ASTM E-84, UL 723, UL 2043, UL 756C and/or Class 1/A. Also available are UL 705-rated grades meeting above-the-ceiling air plenum smoke release requirements. Compounds have impact resistance to 18 ft-lb/in., tensile strength to 6500 psi,...

DoorKing Releases Advanced Long Range Card Reader System with Frequency Hopping Technology

The DoorKing DKS AVI system is at the cutting edge of automotive security technology and represents a leap forward in engineering innovation. When it comes to long-range passive card readers, we lead the industry and set the standard for quality and performance. To find out why the DoorKing DKS AVI system is taking the automotive security industry by storm, see our video.