New Centers Products

Horizontal Machining Center includes pallet automation.

Horizontal Machining Center, Model FA450-III can be paired with high-speed rail guided vehicle and pallet storage system to form complete metal-cutting cell. Three-level stocker system allows unmanned machine loading and lights-out production. Due to modular design and virtually unlimited capacity, additional machines, loading stations, and up to 120 pallets can be added without interrupting...

Five-Axis Machine meets automated production demands.

High-speed Model UCP 600 Vario features modular tool changer that can hold 100-220 tools. With 7-position pallet changing system, workpieces with surface area up to 13 x 13 in., height of 14 in., and max weight of 176 lb can be automatically changed and simultaneously machined. Available with 12,000, 20,000, or 42,000 spindle options, machining center includes rotary/tilt table that swivels...

Vertical Machining Center features linear motors.

Model VL30-5X uses linear motors, rather than ballscrews, for increased acceleration and deceleration rates and overall contouring accuracy. It offers cutting feed rate up to 1,574 ipm with 1G acceleration/deceleration rate. X, Y, Z axes range is 200 x 300 x 200 mm. Up to 50,000 rpm spindles are offered. Machine provides 50 rpm in A-axis and 100 rpm in B-axis.

Horizontal Machining Center allows feeds up to 48 m/min.

Targeted at high precision job shops, Model HW63A provides X, Y, Z axes envelope of 1000 x 800 x 800 mm and 40/30 hp spindle with 6,000 rpm. Glass scale feedback systems offer 0.001 mm resolution. Three-point leveling cast iron bed provides stiffness and rigidity, and dual ballscrews provide improved motion control and high axis thrust. Steel box slide ways feature G-II lubrication system that...

6 Challenges Faced by Supply Chain Leaders in Discrete Manufacturing and How Analytics Solves Them

This eBook describes the challenges faced by Supply Chain Leaders in Discrete Manufacturing. From consumer electronics to automotive manufacturing, most of the global economy's largest industries rely on discrete manufacturing. Manufacturers in these industries face several unique challenges. The COVID-19 pandemic, followed by war, created major disruptions in supply chains worldwide, stressing the need for more integrated, transparent systems that would facilitate proactive management and faster decision-making. With supply chain issues expected to continue in 2022 and beyond, this ebook will help describe to supply chain leaders ways to prepare for certain global challenges.

HMC suits applications requiring heavy material removal.

Equipped with 50-taper, 4.33 in. dia, 6,000 rpm spindle, FH630R boxway machine has cast bed that incorporates 3-point support model for ease of installation and maintenance. Dual ballscrews and dual drives in each axis contribute to acceleration rates, reaching 1,890 ipm with acceleration of 0.5 G. G-II slideway rests each boxway guide on pressurized, micro-thin layer of lubricant. Dual Z-axis...

Horizontal Machining Center optimizes non-cutting operations.

Designed with spindle that reaches full speed in 2.3 sec, FH-S Series also employs low-friction linear guides that rely on roller bearings and deliver vibration-dampening performance. Modular design accepts 15,000 rpm spindle, available in No. 40 or 50 taper sizes, or 6,000 rpm, No. 50 taper spindle. Equipped with Fanuc 30i CNC that adopts Field Bus network, machine acceleration is 1 G with...

Horizontal Machining Center uses minimum quantity lubrication.

Near-dry Model RM80H features 80 mm diameter spindle capable of 8,000 rpm, and X, Y, Z axis travels of 20.8, 22.0, and 20.8 in., respectively. It provides deep hole drilling and rapid penetration up to 40 ipm, making it suited for forged steel and nodular iron crankshaft applications. System mixes air with fluid in spindle and applies droplets through tool to cutting surface. No more than 2 oz of...

Vertical Machining Center operates at 10,000 rpm.

Model VX650 offers X, Y, Z travels of 55, 26, and 25 in. with rapid traverses of 1,575, 1,575, and 1,181 ipm. Four-slideway structure in Y axis provides stability for heavy duty machining. Available with BT or CAT 40 tool shank, machine includes 20-tool ATC, centralized Fanuc 0IMB controller, and 63 x 25.6 in. table with load capacity of 2,866 lb.

Horizontal Machining Center provides high speeds.

With rapid traverse rate of 1,969 ipm, HX630 combines max work area of 39.37 high x 36.6 in dia with respective X, Y, and Z traverses of 41.3, 34.4, and 34.4 in. Machine has cutting feed rate of 1,969 ipm and spindle speed of 8,000 rpm. Standard configuration includes Fanuc 18iMB controller. Wedge-type mechanism produces 4,630 lb of pull stud retention force, while CAM-type ATC system minimizes...

Horizontal Machining Center is driven by 2-step gearhead.

Model HX400 employs rotary-type auto pallet changer and fixed-address ATC that holds 40 tools. Tool change takes 1.3 sec, and balanced spindle structure, supported by rugged box-way design, enables machine to obtain stable accuracy during heavy-duty machining. Features include dual internal screw conveyors, idle station that rotates freely with pin-lock cylinder at 90Ã-

What Can Test Devices Spin for You?

Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.