Advance Transformer Co.
Rosemont, IL 60018
Share:
Ballasts support high-wattage compact fluorescent lamps.
SmartMateÃ-® ballasts support PL-H(TM) lamps from Philips. One ballast can operate one or two 60 W lamps, one 85 W lamp, or one 120 W lamp. Available in 13-120 W range, ballasts are rated to 90Ã-
Read More »
Ballasts suit high-wattage, metal halide applications.
Compact Core Ballasts utilize 4Ã-¼ x 4Ã-¾ in. core and are available for 1,000 W probe-start, 1,000 W pulse-start, and 875 W pulse-start metal halide lamps. Units comply with ANSI, UL, and CSA standards. Multi-tap formats include 120/208/240/277 quadri-voltÃ-® and 347/480 dual-volt with 120 V output tap. Ballasts are suited for high bay industrial fixtures, outdoor flood and area...
Read More »
Dimming Ballast suits range of CFL applications.
Mark 7(TM) Electronic Dimming Ballast supports 8 compact fluorescent lamp/ballast combinations including 13 W and 18 W applications. It includes programmed-start lamp ignition, total harmonic distortion below 10%, color-coded poke-in connectors, lamp end-of-life protection circuitry, and operation above 42 kHz. Unit dims lamps directly from compatible 0-10 V controls, including occupancy sensors,...
Read More »
Ballasts drive two 57 or 70 W compact fluorescent lamps.
SmartMateÃ-® Ballasts offer programmed lamp ignition for extended lamp life in frequent switching applications. Model ICF2S70-M4-BS has bottom studs and single-entry connector, while Model ICF2S70-M4-LD features length mounting feet and dual-entry connector. Maximum case temperature is 90Ã-
Read More »
Dimming Ballast is designed for 18 W CFL operation.
Encased in 3.00 X 4.55 X 1.29 in. housing, Mark 10(TM) Powerline Dimming Ballast is available for operation of one or two 18 W Triple or Quad Tube Compact Fluorescent Lamps (CFLs). Product delivers 100%-5% continuous dimming capability and takes dimming signals directly from power line. Features include programmed-start operation that provides lamp ignition at any light setting, operation above...
Read More »
Electronic Ballast is suited for HID lamps.
DynaVision(TM) microprocessor-based electronic ballast, designed for operation of 320, 350, or 400 W pulse-start metal halide lamps, is able to maintain lumen levels over lamp life. Product features IntelliVoltÃ-® technology, which permits operation on voltage systems ranging from 200-277 V. Additional offerings include continuous 0-10 V dimming down to 50% of lamp power and ability to...
Read More »
Ballasts meet demand for shorter ignition times.
Quik-Start Compact Fluorescent Lamp (CFL) ballasts ignite lamps in less than 1.0 sec and are suitable for operation of 13 W Triple, 26 W Quad or Triple, and 32 W Triple CFLs. IntelliVoltÃ-® technology allows 120-277 V, 50/60 Hz operation. CentiumÃ-® technology enables units to meet stringent power quality requirements with total harmonic distortion less than 10% and power factor greater...
Read More »
Ballast features programmed rapid-start lamp ignition.
Advance CentiumÃ-® ICN-2S28 operates one or two 35, 28, 21, or 14 W T5 fluorescent lamps. IntelliVoltÃ-® technology allows 120-277 V operation at 50 or 60 Hz. Power factor is greater than 98% and Total Harmonic Distortion is less than 10%. High-frequency operation between 40-54 kHz prevents interference with infrared control systems. Ballast features 20 ft remote/tandem wiring, 0Ã-
Read More »
Ballast operates 70 W compact fluorescent lamps.
Each SmartMateÃ-® ICF-2S42-M2 ballast operates one 70 W lamp. Unit is available in 3 versions: with length mounting feet and dual-entry connector, with bottom-mount PEM studs and single-entry connector, and with single-entry bottom connector without studs. Connectors are color-coded for accurate, push-in wiring. IntelliVoltÃ-® universal voltage feature allows operation on systems ranging...
Read More »
Electronic Ballast operates at 347-480 V, 50/60 Hz.
CentiumÃ-® HCN-2S54-90C can operate one or two F54T5/HO lamps; one or two 55, 50, or 36/39 W Long Twin Tube lamps; or one or two 55 W Circline lamps. It features IntelliVolt-Hi technology, Programmed Rapid Start lamp ignition, and end-of-life protection circuitry. Auto-restrike eliminates need to reset power mains after replacing failed lamps. Ballast includes 20 ft remote-mounting...
Read More »