Advance Transformer Co.
Rosemont, IL 60018
Share:
Ignitor Assemblies suit magnetic HID fixtures.
Square Plug-In Ignitor Assemblies are electrically identical to company's standard ignitors for metal halide and high pressure sodium ballasts, but are housed in mechanical enclosure with 3 tab terminals. Models LI551-SQR and LI501-SQR are for 35-150 W and 150-400 W HPS lamps, respectively, while Model LI533-SQR works with 50-400 W MH lamps.
Read More »
Dimming Ballast offers ballast factor of 1.18.
Packaged in low-profile housing, Mark 7 0-10 V Electronic Dimming Ballast is rated at 277 V, allowing operation of four 32 W T8 fluorescent lamps. With dimming ability down to 3% relative light output, ballast will operate between 149 and 27 W. Unit includes programmed-start lamp ignition, total harmonic distortion below 10%, automatic restrike, and operation above 42 kHz. It is suited for big...
Read More »
LED Light Source Drivers can be used in damp locations.
Available with 120 and 230 V input voltages, signPRO(TM) damp location-rated drivers are designed for Luxeon(TM)-branded LEDs. Sign drivers, offered in 350 and 700 mA models, are suited for use in sign settings where moisture could be of concern. Compact products deliver constant current operation, eliminating need for current-limiting resistors. Leaded design, with UL Class 2 rating, includes...
Read More »
Miniature Electronic Ballasts come in 1- or 2-lamp models.
Offered in 4.4 x 1.85 x .94 in. (one lamp) and 5.0 x 1.85 x .94 in. (2 lamps) sizes, MatchboxÃ-® ballasts include High Power Factor (HPF) models for operation of 4-pin compact fluorescent and T5 linear fluorescent lamps @ 120 V. Products operate compact fluorescent lamps in various combinations and feature color-coded poke-in connectors and end-of-lamp-life circuitry. Instant-on electronic...
Read More »
Electronic Ballast suits hi-bay fixtures.
CentiumÃ-® Electronic Ballast for 4-Lamp T5/HO lamp applications is available in 16.7 in. housing with integral leads. IntelliVoltÃ-® multiple-voltage technology enables operation at any input voltage from 120-277 V, 50/60 Hz. Programmed-start ignition insure optimum lamp life in frequent switching applications. Ballast features 90Ã-
Read More »
Dimming Ballasts work with 1- and 2-lamp long twin tubes.
Mark 10 Powerline electronic dimming ballasts take dimming signals directly from power line, delivering 100%-5% continuous dimming capability. Encased in 9.50 x 1.70 x 1.18 in. housings, models for 1- and 2-lamp long twin tube fluorescent lamp applications feature dedicated voltage of 120/277 V, 60 Hz and can control 36 and 39 W long twin tube lamps in addition to 40 W lamps. All models are...
Read More »
Ballasts suit low-wattage metal halide applications.
Low-wattage, metal halide F-Can ballasts incorporate XtenzaÃ-® wide-range ignitor, which supports applications involving up to 50 ft of remote ballast-to-lamp mounting distance. Available in 70, 100, and 150 W single-ended lamp versions, ballasts feature 120/277 V or 120/347 V, 60 Hz dual-voltage input and auto-reset thermal protection for both voltage taps. Products are suited for indirect...
Read More »
Ballast supports UV disinfection market.
Microprocessor-controlled PureVOLT(TM) electronic ballast is designed to operate 800 mA High Output (HO) germicidal UV-C lamps, which aid in stopping spread of microorganisms, airborne contaminants, and pathogens. Single unit will operate one or two 35 or 60 W HO or one 95 W HO low-pressure mercury germicidal UV twin tube lamp. Product offers dual entry, color-coded connectors, end-of-lamp-life...
Read More »
HID Ballast suits track or downlighting applications.
Electronic e-VisionÃ-® ballast, for 100 W Mini whiteSON lamp, effectively highlights warm color schemes and is suited for retail, grocery, and hospitality settings. Available with side leads or bottom leads with studs, ballast features IntelliVolt technology, which allows unit to operate at any input voltage from 120-277 V, 50/60 Hz.
Read More »
Dry-Film Capacitors are rated from 100 to 105-
Dry metallized-film capacitors can be used with all HID ballasts for metal halide, high-pressure sodium, mercury vapor, and low-pressure sodium lamps utilizing capacitors rated 400 V or less. Features include compact size, thermoplastic construction, no exposed live parts, and UL/CSA approval.
Read More »