Advance Transformer Co.
Rosemont, IL 60018
Share:
Electronic Ballast operates 1-4, T5/HO Fluorescent Lamps.
CentiumÃ-® model ICN-4S54-90C-2LS operates 36/39, 50, and 55 W long twin tube lamps as well as F58T8 lamps. With IntelliVoltÃ-® technology, ballast works with lamps at any input voltage from 120-277 V, 50/60 Hz. High-low switching option allows fixture to control number of lamps in operation. Type CC rated for anti-arcing protection, unit has 1 in. high, low profile housing and 90Ã-
Read More »
Electronic Ballasts feature instant-start design.
Optanium(TM) Ballasts for T8 lighting systems are offered in standard and low-watt designs with ballast factors of .88 and .78, respectively. Independent lamp operation allows other lamps to continue operating if one or more lamps should fail. Operation between 40 and 50 kHz helps prevent interference with infrared control systems. Ballasts are available for 1, 2, 3, or 4 lamps, on both 120 and...
Read More »
Ballast Replacement Kits facilitate installation.
SmartMateÃ-® CFL Electronic Ballast Kits are designed for use with lighting fixtures operating Compact Fluorescent Lamps. They include mounting-plate adapter and color-coded lead wires which are pre-stripped to UL-required 3/8 in. on poke-in end and 5/8 in. on J-box connection end. Ballast features 0Ã-
Read More »
Dimming Ballast operates Compact Fluorescent Lamps (CFLs).
Mark XÃ-® Powerline Dimming Ballast operates two 32 or 42 W Triple CFLs or one 57 or 70 W Triple CFL. It delivers full-range (100% to 5%) continuous dimming capability. Suited to meeting rooms, presentation spaces, and computer-intensive work areas, ballast takes dimming signal directly from power line and operates with wall box dimmers, architectural dimmers, and occupancy sensors. It...
Read More »
Lamp Ballasts meet new pulse start specs.
Linear Reactor ballasts for pulse-start metal halide lamps have automatic reset thermal protection that interrupts power to ballast in event of abnormal lamp or ballast failure. They meet existing and newly proposed pulse-start ANSI specifications. Ballasts are available for various metal halide lamp wattages, including: 150 W (ANSI Code M102/M142), 200 W (M136), 250 W (M138/M153), 320 W...
Read More »
Fluorescent Lamp Ballast operates two 32 or 42 W triple CFLs.
Mark VIIÃ-® 0 to 10 V Dimming Ballast operates one 57 or 70 W Triple CFL (Compact Fluorescent Lamp). Model IZT-2T42-M3-LD has color-coded dual-entry connector and side mounting tabs, and model IZT-2T42-M3-BS offers bottom mounting studs and single-entry connector. Former provides 100% to 5% dimming and allows lighting control across branch circuits, while latter offers IntelliVoltÃ-®...
Read More »
Dimming Ballasts offer 1- or 2-lamp operation.
Mark VIIÃ-® 0-10 V Dimming Ballasts are for use with T5/HO fluorescent lamps, including 54 W linear lamps, 55 W circline lamps, and 55 W long twin tube lamps. They operate on 120 or 277 V systems. Units dim lamps directly from compatible 0-10 V controls, including occupancy sensors and ambient light sensors. They include programmed-start lamp ignition, THD below 10%, end-of-life protection...
Read More »
LED Power Supplies are designed for lighting applications.
Xitanium(TM) LED drivers are rated for 50,000 hr life. Since they are UL Class 2 and FCC Class B rated, they can be used virtually anywhere, with no special wiring routing requirements. Drivers can operate as low as -40 deg C and have 90 deg C case temperature rating. Xitanium Series includes 120 V, constant output current drivers for 12 W (350 mA), 17 W, (700 mA), 25 W (1050 mA), and 40 W (1750...
Read More »
Ballast Replacement Kits fit HID applications.
Suitable for metal halide and high pressure sodium lamps, 5-TAP ballast replacement kits include pre-insulated lead for use on each of five U.S. voltage systems: 120, 208, 240, 277, and 480 V. Pre-insulated leads for each voltage tap help assure safety and eliminate need to terminate unused leads with wire nuts. All necessary mounting hardware and detailed instructions are included with each kit....
Read More »
Ballasts operate pulse-start metal halide HID lamps.
F-Can Ballasts incorporate Xtenza(TM) ignitor technology, making them suitable for remote mounting and permitting lamp-to-ballast distances up to 50 ft. Models operate on 120 or 277 V systems. All components including core and coil, dry-film capacitor, and ignitor are encapsulated in single metal case. Ballasts feature auto-reset thermal protection for both voltage taps. They are available for...
Read More »