Master Bond, Inc.

Adhesives & Sealants

Low Visocity Epoxy offers sub-zero curing.

Providing resistance to water and chemicals, 2-component EP37LV-1 Polymer System features tensile strength in excess of 8,300 psi, working life of 30 min at room temperature, and final mix viscosity of 5,000 cps. Full cures are obtained in 8-10 hr, while complete cures take longer at lower temperatures. Applications range from grouting, troweling and concrete patching in damp locations to marine...

Read More »
Transparent Epoxy is resistant to high temperatures/humidity.
Adhesives & Sealants

Transparent Epoxy is resistant to high temperatures/humidity.

With service temperature range of -60°F to over 400°F, Type EP30HT epoxy produces high strength, rigid, chemical resistant bonds, and adheres to similar and dissimilar materials such as metals, glass, ceramics, wood, vulcanized rubbers, and plastics. Product attains shear bond strengths over 3,200 psi, with volume resistivity greater than 1,015 W-cm, dielectric strength of 440 V/mil,...

Read More »
Epoxy Resin Compound features high thermal conductivity.
Adhesives & Sealants

Epoxy Resin Compound features high thermal conductivity.

Suitable for use in both thick/thin sectioned configurations, EP21TDC-2LO bonding, sealing, coating, and encapsulation system has thermal conductivity of 9 BTU/in./ftÂ-²/hr/°F and volume resistivity of 1,012 Wcm. With service operating temperature range of 4 K to 250°F, room temperature curable product features Shore D hardness of 36, elongation of 50%, 1:3 mix ratio by weight or...

Read More »
Silicone Elastomer features electrical insulation properties.
Adhesives & Sealants

Silicone Elastomer features electrical insulation properties.

Suited for sealing and joining of metals, plastics, electrical insulations, protective coatings, and formed-in-place gaskets, Master Sil 700 silicone elastomer compound has dielectric strength of 530 V/mil and 400% elongation. Silicone adhesive/sealant features paste consistency and does not sag, slump, or run off surfaces. It cures at ambient temperatures to a flexible rubbery solid when exposed...

Read More »
Thermally Conductive Epoxy is Exceptionally Flexible
Adhesives & Sealants

Thermally Conductive Epoxy is Exceptionally Flexible

Master Bond Inc. announces the successful culmination of in use trial testing for EP21TDC-2AN, a highly flexible, two component, thermally conducting epoxy resin compound for high performance bonding, coating, and encapsulation. The cured compound exhibits a high, 31% elongation, truly exceptional for a thermal conductive epoxy where the conductivity is a robust 2.6 W/mo°K (18...

Read More »
Silicone Elastomer suits optical and display applications.
Adhesives & Sealants

Silicone Elastomer suits optical and display applications.

Featuring set-up time of 8-12 min at 75°F, room temperature cure MasterSil 415 one component silicone elastomer has dielectric strength of 500 V/mil and service temperature range of -185 to 400°F. Resistant to vibration, impact, and shock, it has Shore A hardness of 30, elongation of 400 at 75°F, and tensile strength of 325 psi. Compound can be applied on vertical surfaces...

Read More »
Epoxy Adhesive is serviceable at temperatures down to 4°K.
Adhesives & Sealants

Epoxy Adhesive is serviceable at temperatures down to 4°K.

With 3-minute set-up time, EP51M produces bonds with 2,000+ psi shear strength that exhibits resistance to thermal cycling and chemicals. Bonded parts can be safely handled within 30 min. Product, suited for cryogenic applications, adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. Insensitive to cleaning procedures, it can be used in electronic, electrical, computer,...

Read More »
Single-Part Epoxy System cures with UV light or heat.
Adhesives & Sealants

Single-Part Epoxy System cures with UV light or heat.

Environmentally friendly UV15DC80, suited for bonding, sealing, coating, and potting, requires no mixing and has 100% solids formulation. Uninhibited by oxygen, chemically resistant epoxy contains no solvents or volatiles and adheres to variety of materials. For thicknesses of .010-.020 in., straight UV curing is accomplished within seconds with UV light at 365 nm with 30-40 mW/cmÂ-² of...

Read More »
Adhesive Epoxy has operating range of -65 to 400°F.
Adhesives & Sealants

Adhesive Epoxy has operating range of -65 to 400°F.

Designed for high performance bonding, sealing, and casting, Model EP21TDC-4HT epoxy compound resists vibration, impact, and shock, and can be room temperature or heat-cured. High physical strength properties include tensile strength of 8250 psi, tensile shear strength of more than 2800 psi, and peel strength exceeding 36 pli at 25°C. Featuring volume resistivity greater than 1014 ohm-cm,...

Read More »
Epoxy System resists temperatures up to 400°F.
Adhesives & Sealants

Epoxy System resists temperatures up to 400°F.

Medium-viscosity, 2-component EP30HT has 4:1 mix ratio by weight, is 100% reactive, and does not contain solvents or volatiles. It cures at room temperature or more rapidly at elevated temperatures. Serving as adhesive/sealant, coating, and casting compound, product adheres to metals, glass, ceramics, woods, vulcanized rubbers, and plastics. Optically clear formula has refractive index of 1.54...

Read More »

All Topics