Master Bond, Inc.
Hackensack, NJ 07601-3950
Epoxy System is resistant to chlorinated organic solvents.
Master Bond Polymer System EP41S-5, two component epoxy resin composition provides chemical resistance to aggressive media such as fuels and strong oxidizing acids. Resistance is maintained after prolonged exposures without deterioration of pertinent performance properties. Offered in various viscosities, it cures at room or elevated temperatures and has 4 to 1 mix ratio, weight or volume....
Read More »Aluminum-Filled Epoxy cures at room temperature.
Type EP22 2-component epoxy adhesive features 1:1 mix ratio by weight or volume. It produces high strength bonds with adhesion to metals, particularly steel and aluminum. Bonds are resistant to thermal cycling and chemicals. Epoxy is readily machinable and can be employed over temperature range of -60 to 250Ã-
Read More »Instant Adhesive resists shock and vibration.
MB297FL single component cyanoacrylate adhesive has operating temperature range of -65 to +185Ã-
Read More »Adhesive/Sealant has service range of -75 to 500-
Polymer System X5HT one component, contact type adhesive/sealant offers dimensional stability and creep- and chemical-resistance. Curing process requires application to each substrate, application of pressure (less than 50 psi), and curing at 300 to 400Ã-
Read More »Epoxy System is approved for NASA outgassing specifications.
With 10:1 mix ratio by weight, EP30LTE-LO room temperature curing epoxy system has CTE of 12 x 10-6 in./in. per Ã-
Read More »Epoxy Adhesive is graphite filled and electrically conductive.
Two-component EP75-1 has 100 to 15 mix ratio by weight. It cures at room temperature or more rapidly at elevated temperatures. Adhesive develops bonding strength of more than 2,000 psi tensile shear when measured and cured at 75Ã-
Read More »Epoxy Adhesive needs no mixing, cures at 175-
One-component Supreme 3HT-80 has high shear and high peel strength, and resists impact, thermal shock, vibration, and stress fatigue cracking. It adheres to metals, glass, ceramics, wood, vulcanized rubbers, and most plastics. Bonds resist water, oil, fuels and most organic solvents, even upon prolonged exposures. Operating temperature range is -100 to +350Ã-
Read More »Adhesive is removed with acetone or ketone solvents.
Single component, flexible, UV curable adhesive UV14-3 cures at room temperature in seconds to 1 min. It is not oxygen inhibited and does not require inert atmosphere. It requires no mixing, and develops high bond strengths with metals, ceramics, glass, paper, plastics, and elastomers. UV14-3 has operating temperature range of -60 to +250Ã-
Read More »Epoxy Resin System offers chemical resistance.
Two-component EP41S-2 epoxy adhesive/sealant and coating cures at ambient temperatures or more quickly at elevated temperatures. It is 100% reactive and contains no solvents or diluents. EP41S-2 adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. It withstands prolonged immersion in strong organic solvents. Operating temperature range is -60 to +275Ã-
Read More »Epoxy System meets NASA low outgassing specfications.
EP30-2 low viscosity, two-component system produces high strength bonds that are resistant to thermal cycling and chemicals. Resin system is 100% reactive and does not contain any solvents or other volatiles. Shrinkage upon cure is -0.0003in/in. Hardened resin provides electrical insulation. EP30-2 cures clear and is suitable for sealing, bonding, and laminating applications. Service operating...
Read More »