Master Bond, Inc.

Adhesives & Sealants

Single-Component, Snap Cure Epoxy exhibits high strength.

Curing in 1–2 min at 300°F, Master Bond EP3SP5FLÂ- has flowable, moderate viscosity and adheres to such substrates as metals, composites, glass, ceramics, rubbers, and plastics. Tensile lap shear strength exceeds 2,000 psi at room temperature when bonding aluminum to aluminum. Also acting as effective electrical insulator, epoxy has -60 to +200°F service range....

Read More »
One Component, Electrically Conductive, Sodium Silicate, Aqueous Based Coating System
Material Processing

One Component, Electrically Conductive, Sodium Silicate, Aqueous Based Coating System

Well suited for electromagnetic interference and radio frequency interference shielding applications, Master Bond MB600G is an aqueous based, sodium silicate system with graphite filler. Graphite filled materials are widely used for shielding and static dissipation applications because of the balance of shielding effectiveness and cost. Shielding effectiveness is most often measured by...

Read More »
Low Viscosity, Two Component Epoxy is Optically Clear with Non-Yellowing Properties
Adhesives & Sealants

Low Viscosity, Two Component Epoxy is Optically Clear with Non-Yellowing Properties

Low Viscosity, Two Component Epoxy is Optically Clear with Non-Yellowing Properties Master Bond EP112LS is a two part epoxy that is well suited for impregnation, potting, encapsulation, sealing and coating applications, particularly in the aerospace and optoelectronics industries. EP112LS is optically clear, features reliable non-yellowing properties and has a refractive index of 1.55. This...

Read More »
Optically Clear, Condensation Curing Silicone Offers Superior Dielectric Properties
Adhesives & Sealants

Optically Clear, Condensation Curing Silicone Offers Superior Dielectric Properties

Developed for potting and encapsulation applications where an addition cured silicone cannot be used, Master Bond MasterSil 152 is a two component, condensation curing system that only requires air for complete cross-linking. Unlike addition cured systems, there are no substrates that will inhibit the cure. This system fully cures at room temperature in 24-48 hours and has low exotherm. MasterSil...

Read More »
Adhesives & Sealants

Two Component, Thermally Conductive Epoxy Resists High Temperatures

Formulated for bonding and sealing applications, Master Bond EP46HT-1AO is widely used in the aerospace, electronic and specialty OEM industries. Unlike most conventional two component epoxies, EP46HT-1AO cures with the addition of heat, which allows it to have a working life exceeding 24 hours. It has a forgiving 100 to 30 mix ratio by weight and bonds well to metals, composites, glass, ceramics...

Read More »
Adhesives & Sealants

Optically Clear UV Curable System Offers High Bond Strength and Fast Cures

Specially formulated to optimize bond strength, Master Bond UV15-42C is a UV curable system for bonding, sealing and coating applications. This smooth paste can be applied vertically without sagging. As an optically clear compound, it is often used in the fiber-optic, optical, electronic, aerospace and specialty OEM industries. This one part system bonds well to a wide variety of substrates...

Read More »
Thermally Stable, Two Part Epoxy Meets NASA Low Outgassing Specifications
Adhesives & Sealants

Thermally Stable, Two Part Epoxy Meets NASA Low Outgassing Specifications

Master Bond EP30-3LO is a two component epoxy system offering optical clarity, high temperature resistance, and NASA low outgassing approval. This combination of properties enables it to be suitable for bonding, sealing, coating and encapsulation applications in the aerospace, electronic, optical and optoelectronic industries. This epoxy has a glass transition temperature exceeding 175°C....

Read More »
Adhesives & Sealants

One Component LED Curable System Meets USP Class VI Specifications for Biocompatibility

Widely used in the manufacture of disposable medical devices, Master Bond LED403Med is a single component system that passes the plastics test for USP Class VI and ISO 10993-5 cytotoxicity requirements. This medical grade system withstands sterilization methods such as gamma radiation, EtO and various chemical sterilants. Optically clear LED403Med cures fully tack-free upon exposure to a 405 nm...

Read More »
Rigid, Abrasion Resistant Two Component Epoxy for Bonding, Coating, and Sealing Applications
Adhesives & Sealants

Rigid, Abrasion Resistant Two Component Epoxy for Bonding, Coating, and Sealing Applications

Engineered with a silicon carbide filler material, Master Bond EP21SC-1 delivers abrasion resistance for an array of chemical and mechanical processing applications. This epoxy has a smooth paste consistency and a non-critical one to one mix ratio by weight or volume. As a two part system, it cures readily at room temperature or more quickly at elevated temperatures. With a Shore D hardness...

Read More »
Non-Drip, One Component Silicone Offers High Temperature Resistance, Thermal Conductivity and Electrical Isolation
Adhesives & Sealants

Non-Drip, One Component Silicone Offers High Temperature Resistance, Thermal Conductivity and Electrical Isolation

Non-Drip, One Component Silicone Offers High Temperature Resistance, Thermal Conductivity and Electrical Isolation Placing an emphasis on convenient handling, Master Bond MasterSil 705TC features a paste consistency that doesn't require mixing. This single component system sets up in 7 minutes and has a non-corrosive cure at room temperature when exposed to atmospheric humidity. Suitable for a...

Read More »

All Topics