Workholding Systems

Kurt HD and HDL Workholding Replaces DL430 DoubleLock and CT430 Cluster Tower - New And Enhanced Kurt Workholding Features Meet Needs of Latest Machining Centers

Kurt HD and HDL Workholding Replaces DL430 DoubleLock and CT430 Cluster Tower - New And Enhanced Kurt Workholding Features Meet Needs of Latest Machining Centers

Minneapolis, Minnesota: When machinists asked for new workholding features to meet the needs of the latest machining centers, Kurt answered with its HD and HDL Vises and Towers. These workholding products replace the Kurt DL430 DoubleLock and CT430 ClusterTowers®. The HD and HDL series vises and towers are new, patented designs providing more options for faster setups, larger workholding...

Read More »

The Kostyrka Universal Holding Fixture (UHF) Offers a Highly Flexible Way to Reduce Costs

Menomonee Falls, WI - The Kostyrka UHF is a highly flexible chucking device that can be adapted to several hundred different individual workpiece supports. It is ideal for aerospace applications, the manufacture of body components in the automotive industry, measuring technology applications and in many areas of metrology. Whenever a workpiece changeover takes place, the universal device is...

Read More »
Kurt Introduces a Wide Range of Hydraulic Swing Clamps, Valves and Pumps - They Position and Clamp Workpieces for High Precision Machining Repeatability

Kurt Introduces a Wide Range of Hydraulic Swing Clamps, Valves and Pumps - They Position and Clamp Workpieces for High Precision Machining Repeatability

Minneapolis, Minnesota: Kurt announces the introduction of a wide range of Hydraulic Swing Clamps, Valves and Pumps for clamping workpieces in a high production machining environment. This new Kurt product line provides a wide range of Swing Clamps and accessory options for configuring the right workholding system for a single machining center or a multi-pallet cell with multiple machines. This...

Read More »
An Event Like No Other - imX

An Event Like No Other - imX

SCHUNK exhibits at imX, Booth 1400 imX, the interactive manufacturing eXperience, is a new event that will be held in Las Vegas from September 12-14. imX is different from traditional trade shows - it is an interactive and educational experience with a focus on knowledge transfer and deep engagements to solve specific manufacturing challenges of today and for the future. SCHUNK offers worldwide...

Read More »
Collet Chucks feature air-activated design.

Collet Chucks feature air-activated design.

Interchangeable with 4 in. chucks, 5C Collet Chucks utilize standard wet or dry air feed tubes with same bolt pattern as 4 in. models. All components are hardened and ground to 58/63 R.C. and all diameters are ground within 1/10,000 T.I.R. Utilizing standard 5C collets as well as 5C expanding collets, chucks run at speeds in excess of 8,000 rpm.

Read More »

Precision Diaphragm Chuck features 6-jaw design.

Measuring 6 in. dia, Model DPH-600W employs special jaws and stop to grip plasma welding nozzle. Stop has six .040 in. dia air detect holes for part seating confirmation, and chuck is counterbalanced to maintain exact jaw for up to 6,500 rpm. Along with respective radial and axial accuracies of 0.000020 and 0.000010 in. TIR, product offers max speed of 10,000 rpm, standard chucking range of 0-4.8...

Read More »
Coolant Airblast Air Chuck grips hole saw blanks.

Coolant Airblast Air Chuck grips hole saw blanks.

Model 627w (.0001 TIR) 6 in. dia., coolant/air blast thru, 2-jaw air chuck, with 1 in dia. counter bore for tap clearance, provides workholding package to grip hole saw blanks for turning and tapping. Sub-jaws have 2 bullet nosed pins that will grip blanks between 2 holes, and -¾ in. wide jaws fit between 2 hardened and ground full circle segments mounted to chuck face to support workpiece...

Read More »

Five-Axis Workholding System has modular, quick-change design.

Mounted to any machine or rotary table, Fixture Pro-® 5-Axis Quick Change System permits multi-sided access to pallet-mounted workpieces on 3+2 multiaxis and 5-axis machines. Modular quick change system, allowing unrestricted access to various part faces, offers various riser sizes and styles to raise part off table, while jaws and other vise components provide rigid clamping forces. All...

Read More »
Modular 5-Axis Vise decreases stationary jaw deflection.

Modular 5-Axis Vise decreases stationary jaw deflection.

Equipped with Anglock-® feature that minimizes part lift, MaxLock(TM) 350 holds parts with up to 10,000 lb clamping force at 60 lb-ft input torque for max rigidity and close tolerance repeatability in all axes. It enables obstruction-free, high-speed machining in all 5 axes and is constructed with steel components. Featuring 0.625 in. stroke, vise is adjustable to handle any desired clamping...

Read More »

All Topics