Workholding Systems

Diaphragm Chuck is developed for indicator manufacturers.

Diaphragm Chuck is developed for indicator manufacturers.

Designed for manufacturers of electronic and mechanical indicators, Model DPH-600 is 6 in., 10,000 rpm, totally sealed, TIR diaphragm chuck with special jaws, stop, and changeable fixtures. It enhances and increases production of machining 2 bores that guide indicator rod. Once side is machined, fixture is turned over, and second side is machined; alignment of 1/10,000 TIR is achieved bore to...

Read More »
Milling Chucks come in 3 and 2 jaw configurations.

Milling Chucks come in 3 and 2 jaw configurations.

Available in 3, 4, 5, and 6 in. sizes for OD and ID clamping applications, manually actuated Production Milling Chucks integrate with tombstones and pallets for machining centers, milling machines, and grinders. They are clamped and unclamped on top face, enabling more chucks to be ganged together. Chucks feature 2 stage clamping; fast initial jaw stroke for large opening and primary stage to...

Read More »
The Powerhouse of Hydraulic Expansion Toolholders Is the TENDO-ES

The Powerhouse of Hydraulic Expansion Toolholders Is the TENDO-ES

The SCHUNK TENDO-ES, is an extremely short hydraulic expansion toolholder, which allows the tool to be clamped directly in the mounting taper. This way, the tool shank is supported via the spindle. The result is the highest holding forces for transferable high torques and a great deal of additional space in the machining area. The TENDOS-ES L1 is 26.0 mm, has a run-out accuracy of less than 0.003...

Read More »
Workholding Chuck has drawbar activated design.

Workholding Chuck has drawbar activated design.

Along with centered pilot for optimized accuracy and repeatability, 4 in. dia drawbar-actuated, pull-down chuck features spring-loaded funnel-shaped base that goes into chuck body with zero clearance sliding fit. Operator pushes part down into funnel, and 2 spring-loaded ball plungers hold part in place. Precision centering power air and diaphragm chucks are available for lathe and milling...

Read More »

Development Kit provides complete workholding solution.

Unilock Starter Kit lets users plug components immediately into their production cell, eliminating setup time and promoting productivity. Offered as complete workholding solution, kit includes clamping chucks mounted to universal adapter plates; universal pallets that facilitate attach/detach of positioning; and clamping components used to hold that which needs to be exchanged in and out of...

Read More »
High-Pressure Vise offer variable jaw and gripper clamping.

High-Pressure Vise offer variable jaw and gripper clamping.

Built on GGG 60 base with hardened and ground guideways, ALLMATIC TITAN 125 employs fully enclosed, maintenance-free, high-pressure spindle equipped with wear-resistant mechanical power intensifier. Workpieces can be changed in seconds, and torque wrench, adjustable from 6-30 Nm, is used for defined clamping. Side openings allow chips and cooling lubricant to escape, threaded holes on both sides...

Read More »

Parlec to Showcase its Innovative Technologies and Products at WESTEC 2008

Rochester, NY, January 28, 2008 - Parlec, Inc., a worldwide leader in tooling, workholding, and presetting solutions, announced it will exhibit its presetting, high-speed tooling, workholding, and driven and static solutions at WESTEC 2008 Exposition and Conference in Los Angeles, California, March 31 - April 3, 2008, Booth 2963. Parlec will showcase its Series 1500 Parsetter TMMÂ-®, the...

Read More »
Modular Subplate is designed for small workpiece fixturing.

Modular Subplate is designed for small workpiece fixturing.

QwikStack is designed to utilize large workholding systems for high-density, small workpieces by interfacing directly with Chick System 5 1550 QwikLoks and MultiLoks. This also creates pallet changing system that allows for seamless job transitions. Up to ten 2 in. QwikLoks can be mounted horizontally, creating 20 small-part clamping stations, or up to 6 can be mounted vertically. QwikStack can...

Read More »
Modular Swivel Unit features 180-

Modular Swivel Unit features 180-

Offered in 6 sizes and 12 torques ranging from 0.6-50 lb-ft, Series SRH comes with modular swivel heads that include SRU rotary modules combined with 2 swivel corners, EDF electric feed-throughs, and MDF media feed-throughs. Electric feed-through uses digital signals for sensors or simple actuators, while media feed-through is directly connected to mounting surfaces of swivel head. Swivel head...

Read More »

All Topics