Workholding Systems

EXSYS to Spotlight New Gearbox and Vise Offerings at MMTS 2014

EXSYS to Spotlight New Gearbox and Vise Offerings at MMTS 2014

SAN ANTONIO, Fla.- – In booth 441 at the Montreal Manufacturing Technology Show (MMTS), May 12-14 at Place Bonaventure, Montreal, Quebec, high-precision toolholding, workholding, and gear technology provider EXSYS Tool, Inc. will exhibit a selection of innovative new products including precision EPPINGER gearboxes and modular Gressel vises. Among the established EXSYS offerings on display will...

Read More »
Flexible Hydraulic Workholding Saves Set-up Time

Flexible Hydraulic Workholding Saves Set-up Time

Planet Products Corporation introduces flexible top tooling modules for use on the ProHold series hydraulic vises and vise towers. The flexible top modules along with the base module can act as a vise, fixture plate, hydraulic chuck, or any combination thereof, allowing a quick change, flexible workholding system for various sized work pieces. Although the vise and tower modules are designed for...

Read More »
KITAGAWA-NORTHTECH, INC. Adds Five New High Performance Steady Rests to Fleet of Workholding Offerings

KITAGAWA-NORTHTECH, INC. Adds Five New High Performance Steady Rests to Fleet of Workholding Offerings

Depth and availability of precision workholding solutions is critical to help customers maintain stable throughput and productivity. To ensure customers can acquire the appropriate workholding for their needs, Kitagawa-NorthTech is constantly adding new products to meet every need. Recently, Kitagawa-NorthTech added five new high precision steady rests to their fleet of workholding offerings:- ...

Read More »
Jaw Nuts and Keys are manufactured of heat-treated steel.

Jaw Nuts and Keys are manufactured of heat-treated steel.

Manufactured from 4140 heat treated steel, Dillon Jaw Nuts and Keys exhibit resistance to wear and impact as well as optimized tensile strength and jaw nut life. Dillon Jaw Nuts, T-nuts, and Keys are available to fit power chucks from 6–24 in. dia.- Applications suited for- Dillon 4140 jaw nuts and keys include workholding applications requiring durability and strength, such as high-speed...

Read More »
Diaphragm Clamping System handles small parts.

Diaphragm Clamping System handles small parts.

Able to clamp work piece sizes from 36–125 mm in diameter, VERO-S SPM Plus 138 Module allows users to machine contour of work piece into SPM unit. Radial aligned clamping sides of quick-change pallet system pulls in clamping pin and locks it, retracting Diaphragm top plate to hold work piece with up to 50 kN of force and repeat accuracy of at least 0.0002 in. Hardened stainless steel is used...

Read More »
Custom Workholding System improves machining throughput.

Custom Workholding System improves machining throughput.

Applicable to new machining projects as well as those requiring improved throughput, Custom Engineered Workholding provides precise and repeatable part clamping; high-density, flexible clamping of- related parts on same fixture; and rigidity. Accelerated load/unload features increase part output to maximize productive- machining center capacity. Options include hydraulics, air sensing, prox...

Read More »
Chuck Jaws are available up to 10 in. high.

Chuck Jaws are available up to 10 in. high.

Manufactured from 1018 steel, 4140 steel, or 6061 aluminum, DMI Series suits precision boring, tapping, drilling, and finishing operations. Extended jaws lengths, with heights available to 10 in., promote workpiece stability and allow multiple uses of blank before it is consumed. Also, length lets machinist avoid extra time and- expense associated with welding and bracing needed to...

Read More »
Quick-Change Workholding System allows 5-side part access.

Quick-Change Workholding System allows 5-side part access.

Model CL5™ comprises subplate, riser, and top tooling made up of vise or fixture plate. Subplate transforms T-slot table into modular fixturing plate, allowing flexible clamping and locating of other tooling and/or fixtures. Every plate has built-in clamping and locating for risers, which allows for quick and accurate set-ups. Designed to get part up from machine table, Quintus riser combines...

Read More »
BIG Kaiser to Display Comprehensive Line-Up at South-Tec Booth #1711

BIG Kaiser to Display Comprehensive Line-Up at South-Tec Booth #1711

Hoffman Estates, IL- – BIG Kaiser Precision Tooling Inc. has been continually expanding its product line while staying true to its mission of bringing the highest quality, most precise, most reliable and most accurate tooling and accessory products to market. The entire KAISER EWD Series of digital boring heads will be featured-including the brand new 310 medium diameter and 318 large diameter...

Read More »

REGO-FIX® Will Showcase Advanced Tooling at SOUTH-TEC 2013

reCool-®, secuRgrip-®, PG6 and new milling chucks to take center stage INDIANAPOLIS, Ind.- – Toolholding innovation will take center stage in the REGO-FIX booth 330 at SOUTH-TEC 2013, scheduled for Oct. 29 – 31 in Greenville, S.C. The company will present its new low-cost retrofit solution for the internal cooling of driven tools as well as showcase advanced tooling systems that bring...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics