New Valves Products

Pilot Control has set-pressure range to 2,220 psig.

PCM Modulating Pilot Control valve opens in proportion to overpressure to minimize emissions and product loss. Set pressure is not affected by constant or variable backpressure. ASME NB Certified for air, gas, vapor, and liquid services, unit is offered in sizes 1 x 2 in. through 8 x 10 in. with set-pressure range from 15-2,220 psig. Standard valve has all stainless steel construction and may be...

Swing Check Valve handles food-grade material.

Model 3030 SQ 3 in. valve, for flow reversal prevention in dry-bulk transfer carriers, protects food-grade and sensitive contents at temperatures up to 350Ã-

Solenoid Valves include built-in surge protection.

RedHat Next Generation Solenoid Valves integrate power management circuit into solenoid and use only 2 W of power. Three voltage ranges cover most electrical requirements and include 100-240 ac or dc, 24-99 ac or dc, and 12-24 dc. Valves come in 2, 3, and 4 way models featuring simplified wiring and waterproof coil. They provide increasing dc operation to industry standards for pressure and flow.

Valve Monitoring Systems suit process/automation industries.

ASCO Valve Monitoring Systems (AVMS) combine visual indicators and network communications. Available in rotary or linear actuation with resin or low copper aluminum bodies, they provide 360Ã-

Labor Crisis In Manufacturing

To learn more about collaborative technology solutions for your business and how Universal Robots can help, download this white paper now.

Mini Valve suits single-acting vises and air mechanisms.

Manufactured to attach directly to vise, #36 Mini Valve offers interchangeable inlet and exhaust ports, allowing air hose to be connected to either side of valve. Hand lever, with over-center snap action, is detented in both positions so operator does not have to hold lever in either direction. Valve works with single-acting vises, air operated cross-hole drill jigs, or any single acting air...

Manual Dispense Valve gives operator full control.

Model 2200-1021 incorporates No-DripÃ-® internal design with immediate shut-off action to insure that material will not drip from valve outlet in off mode. It has stainless steel wetted parts with hardened components and wear-resistant seals. Handle is adaptable to both vertical and horizontal applications. Valve accepts fluid pressures up to 6,000 psi, and is suitable for dispensing...

Pumps and Valves fit in small manifold spaces.

Inert Solenoid Pumps and Valves have 0.5 in. footprint and threaded-collar design for mounting to manifold. Locked-in mounting collar, hand tightened into manifold port, ensures even load on gasket seal for pressures up to 100 psi. Units can be customized in PEEK, PPS, Ultem, acrylic, Chemraz, EPDM, Viton, or Teflon. Multiple manifold sizes achieve flows from 10 Ã-µL/min to 2 L/min.

Miniature Ball Valve is pressure rated at 2500 psig CWP.

Bi-directional flow Series MB8 has one-piece seat/packing design and stainless steel body with 2-way inline and 3-way configuration. Valve has positive handle stops and is panel mountable. Port connections are FNPT, CPI(TM) single-ferrule or A-LOKÃ-® double-ferrule systems. Operating temperature range is -65 to 300Ã-

Backflow Preventers protect water systems.

Model RP reduced pressure principle assemblies are designed for use in high- and low-hazard systems. Designed for low head loss, units are available in sizes from 2Ã-½-10 in. Models offer corrosion-resistant construction, internal sensing passage, and module check assemblies. Diaphragm and sensing passage are built into all-bronze relief valve body. Max working pressure is 175 psig and rated...

Meter/Dispense Valve suits highly repetitive operations.

Air-operated Model 2600-009 dispenses small measured volumes of lubricants or other single-component materials. It features hardened components, wear-resistant seals, and internal check valves to insure metered consistency. Positive displacement unit can dispense up to 0.33 cubic cm, and operates at material pressures up to 2,500 psi. It is quickly adapted to fixture, robot, or manual...

Custom Fabrication & Machining Services with Over 30 Years of Experience

As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.