Pressure Control Valves feature high-purity design.
Available in sizes from 3/8–2 in., High Purity Pressure Control Valves incorporate patent-pending piston that eliminates use of elastomers and particle shedding. High-purity operation is further optimized via threaded bonnet, which has no exposed metal bolts. Modular system allows user to adjust set pressure range and go from reducing to retaining (or vice versa) by switching cartridge. With...
Read More »
Leak-Free Micro Valves target LC and GC applications.
Offered in 3 configurations with- 7 different flowpaths, Micro Valves simplify liquid or gas handling in liquid chromatography (LC) and gas chromatography (GC) applications. Fitting design allows leak-free seal without any potential for rotor damage from overtightening, and ¼-28 fitting details permit use of 1/16 or 1/8 in. OD tubing. Rated to 200 psi with .060 in. flowpath, these...
Read More »
Swabbable Needleless Injection Sites are available with t-ports.
Made of- tinted polycarbonate housing and latex-free silicone valve, t-port swabbable needleless injection sites are EtO and Gamma sterilization compatible. Ports are available to fit 0.079 in. OD tubing (#80172), 0.122 in. OD (#80174), or 0.157 in. OD tubing (#80171). Swabbable luer activated female luer lock allows for aspiration or injection, and t-ports are designed to be bonded in-line.
Read More »
Leak-Free Micro Valves target LC and GC applications.
Offered in 3 configurations withÃ- 7 different flowpaths, Micro Valves simplifyàliquid or gas handling in liquid chromatography (LC) and gas chromatography (GC) applications. Fitting design allowsàleak-free seal without any potential for rotor damage from overtightening, and ü-28 fitting details permit use of 1/16 or 1/8 in.àOD tubing. Rated to 200 psi with .060...
Read More »
A Guide to Preventive Maintenance & Refurbishment of Your Tablet Press
Check out this guide to keeping your tablet press in good working order.
Read More »
Swabbable Needleless Injection Sites are available with t-ports.
Made ofÃ- tinted polycarbonate housing and latex-free silicone valve, t-port swabbable needleless injection sites are EtO and Gamma sterilization compatible. Ports are available to fit 0.079 in. OD tubing (#80172), 0.122 in. OD (#80174), or 0.157 in. OD tubingÃÂ (#80171). Swabbable luer activated female luer lock allows for aspiration or injection, and t-ports are designed to be bonded...
Read More »
ROSS CONTROLS® Announces BG Certification for CrossMirror® Series CM Valves
TROY, MI- – ROSS announces their CrossMirror® Series CM Size 0 valves are now BG Certified per the DIN ES ISO 138491 PL e standard. These valves are intended to be used to return a cylinder towards a safe position when de-energized or when a fault occurs. Applications could include pneumatic cylinder presses, welding equipment, and pneumatic doors to name a few. The third party assessment...
Read More »
ROSS CONTROLS-® Announces BG Certification for CrossMirror® Series CM Valves
TROY, MIÃ- – ROSS announces their CrossMirrorî Series CM Size 0 valves are now BG Certified per the DIN ES ISO 138491 PL e standard. These valves are intended to be used to return a cylinder towards a safe position when de-energized or when a fault occurs. Applications could include pneumatic cylinder presses, welding equipment, and pneumatic doors to name a few. The third party...
Read More »
Direct Mount Ball Valves have low operating torque.
Available in 2- and 3-way configurations in both brass and stainless steel, 8E Series (electric) and 8P Series (pneumatic) include models from -¼–4 in. with T port, L port, full port, or standard port options and double acting or spring return actuators. Design incorporates O ring back TFE seats to reduce operating torque. Minimum air supply required for 8P is 80Â psi.
Read More »
Direct Mount Ball Valves have low operating torque.
Available in 2- and 3-way configurations in both brass and stainless steel, 8E Series (electric) and 8P Series (pneumatic) include models from Ã-¼–4 in. with T port, L port, full port, or standard port options and double acting or spring return actuators. Design incorporates O ring back TFE seats to reduce operating torque. Minimum air supply required for 8P is 80ÃÂ psi.
Read More »
CPVC and PVDF Needle Valves serve high-temperature applications.
Clemmons, NC – Hayward Flow Control announces the expansion of its NVA Series Needles Valves to now include CPVC and PVDF materials. With these additional materials to the line, the NVA Series increases the range of applications and services where they can be used, be it higher temperatures or hi-purity. The NVA Series features an integrated stem with a PTFE seat for superior control, purity,...
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
