Stepper Motors

Drivers/Stepping Motors include built-in resolver.
Stepper Motors

Drivers/Stepping Motors include built-in resolver.

AlphaStep PLUS programmable systems are offered with motors in 1.65, 2.36, and 3.35 in. sq frames sizes for round shaft models or 3.54 in. sq for geared models. Holding torque range is 41.5 oz-in. to 327 lb-in. Driver-controller platform can be programmed in positioning, mechanical home seeking, continuous motion and electrical home seeking modes. Software allows user to control and link up to 14...

Read More »
Stepping Motor includes integrated planetary gearbox.
Stepper Motors

Stepping Motor includes integrated planetary gearbox.

MDrive, with on-board electronics, includes Planetary Gearbox (PLG), which increases torque at lower speeds enabling inertia matching, and produces fine positional resolutions. PLG is offered for each size MDrive, including NEMA motor size 14, 17, 23, and 34. Users can select from 1-, 2-, or 3-stage gearboxes and various reduction ratios from 4:1-308:1. Each PLG comes with optional mounting...

Read More »
Step Motors provide high torque per frame size.
Stepper Motors

Step Motors provide high torque per frame size.

T-Series NEMA 23, 1.8° motors provide up to 380 oz-in. torque with accuracy of .0360 for precise load positioning. Housingless square frame optimizes magnetic circuit, reducing space required for motor and providing smooth microstepping. Standard options include leaded or terminal box construction as well as encoders and encoder mounting provisions. Shafts, gears, sprockets, leads,...

Read More »
Stepper Motors provide 5-phase motion control.
Stepper Motors

Stepper Motors provide 5-phase motion control.

Series PCE High Torque Motors are CE-rated and come in 3 lengths from 33 to 98 mm and standard 17, 23 and 34 NEMA sizes. Units offer dielectric strength of 3,000 V and produce nearly 900 oz-in. holding torque. They feature cast iron exterior and are sealed for protection against dust and moisture. High-resolution performance includes 500 Full Steps per Revolution (.72° per step) and 1,000...

Read More »
Stepper Motors

Stepper Motor provides 150 oz-in. of torque.

Model LS is available with 35 and 42 mm Direct Drive frame sizes. It offers step angle of 7.5° and positional accuracy of ±5% (max). Also available as geared motor, Model LS is coupled with Hurst Model A gearbox. Motor is suitable for use in medical lab equipment, agitating/stirring machines, mail metering machines, and printing equipment.

Read More »
Stepper Motors

Stepper Motor comes in 35 and 42 mm sizes.

Direct drive Model LS offers step angle of 7.5°, positional accuracy of ±5% max, and 4 phase bi-filar. Unit is also available as geared motor, which includes Model A gearbox and offers up to 150 oz in. of torque. Model LS is suitable for use in medical lab equipment, agitating/stirring machines, mail metering machines, and small printing equipment.

Read More »
Stepper Motors have integral fail-safe brakes.
Stepper Motors

Stepper Motors have integral fail-safe brakes.

Brakes, coupled to 5-Phase AM Stepper motors, stop heavy loads rapidly and hold them stationary in case of power failure. Holding torque ranges from 41.66 to 138.87 oz-in. Brakes are part of NEMA-size 23 or metric-size 34 package, with dielectric strength sufficient to withstand 0.5 kV at 50 Hz, insulation resistance of 100 Mohms or better, with 500 V potential applied between motor windings and...

Read More »
Stepping Motor System provides high-accuracy positioning.
Stepper Motors

Stepping Motor System provides high-accuracy positioning.

Miniature PMC Series 5-phase hybrid system includes printed-circuit driver board and miniature harmonic drive. Motors have zero-backlash harmonic gearheads in 50:1 (PMC33A1-HG50) and 100:1 (PMC331A1-HG100) gear ratios. Basic step angle performance reaches 0.0072° for 100:1 ratio. PMC33A1-HG50 produces 160 oz-in at 25 rpm using thin driver with 24 Vdc and 0.35 A per phase input....

Read More »
Stepping Motor offers integrated motion control.
Stepper Motors

Stepping Motor offers integrated motion control.

NEMA size 23 stepping motor, MDrive23, offers on-board +12 to +48 V microstepping drive and programmable MDrive 23 motion control. Features include four 5 to 24 V general purpose I/0 lines, one 10 bit analog input, and 0 to 5 MHz step clock rate. Microstep resolution is rated up to 51,200 steps per revolution. MDrive23 Motion Control communicates over RS485, and baud rates range from 4,800 to...

Read More »
Stepping Motors have high torque density.
Stepper Motors

Stepping Motors have high torque density.

PK Series miniature 2-phase hybrid devices are available in 2 frame sizes: 1.1 and 1.38 in. sq. Smaller model is available in lengths of 1.26, 1.57, and 2.03 in. that produce holding torques of 9.2, 13.7, and 16.6 oz-in. respectively, in bipolar excitation mode. It reaches shaft speeds of 4,000 rpm. Larger model is available in lengths of 1.46 and 2.05 in. with holding torques of 28 and 54...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics