Stepper Motors

Stepper Motors are optimized for low moment of inertia.
Stepper Motors

Stepper Motors are optimized for low moment of inertia.

Portescap Turbo Disc Stepper Motors employ rotor that consists of rare earth magnet with proprietary magnetization method that results in reduced step angles. Products feature sinusoidal torque function and independent magnetic circuit that eliminates coupling between phases. Iron circuit, made of SiFe laminations with coils placed near air gap, reduces iron losses and provides more torque at...

Read More »
Size 14 Stepper Motor provides linear and rotary motion.
Stepper Motors

Size 14 Stepper Motor provides linear and rotary motion.

Size 14 linear/rotary dual motion unit provides incremental rotational and linear movement of output shaft. Its 2 degrees of freedom in movement can be actuated independently or concurrently. Run via 2-axis stepper motor driver, actuator delivers up to 50 lb of thrust and 18 oz-in. torque. Available in resolutions from 0.00012-0.00192 in./step, unit delivers linear speeds exceeding 3 inches per...

Read More »
Hybrid Stepper Motors feature neodymium magnets.
Stepper Motors

Hybrid Stepper Motors feature neodymium magnets.

MAE(TM) N Series includes 4 models with precision-honed stators, ground rotors, and step resolutions of 1.8° in full-step mode. Offered in lengths of 2.64, 3.70, or 4.92 in., MAE Size 34 motors achieve holding torques of 397, 680, or 1,076 oz-in. Size 42 motors are 5.51 in. long and achieve holding torque of 1,024 oz-in. Available with 4, 6, or 8 leads, motors are optimized for microstep...

Read More »
Stepping Motors feature 1.97 in. sq frame size.
Stepper Motors

Stepping Motors feature 1.97 in. sq frame size.

Available in lengths of 2.03 and 3.19 in., miniature Series PK25 2-phase motors produce holding torques of 119 and 220 oz-in., respectively, in bipolar excitation mode. Model PK256-02B develops running torques of 80 oz-in. at 600 pps with 48 vdc and 1.4 A per phase input, while Model PK258-02B achieves 155 oz-in. at 300 pps with 48 vdc and 1.4 A per phase input.

Read More »
Stepper Motors

Stepper Motors suit high-tech applications.

LV (Low Voltage) series, available in 11, 14, 17, 23 and 34 frame size motors, can be paired with drive/controller for single-axis applications, or with E-Drives and separate ACR1505 controller for multi-axis applications. Size 11 and 14 steppers are suited for medical and life science markets. HV (High Voltage) series come in 23 and 34 frame size motors and suit applications from units used in...

Read More »
Stepper Motors

Hybrid Stepper Motors feature step resolutions of 1.8º.

MAE(TM) motors provide open-loop control for high-performance positioning applications, delivering step resolutions of 1.8Â-º in full-step mode. MAE Y Series motors incorporate AlNiCo magnets, N Series motors utilize neodymium magnets, and S Series motors have neodymium magnets. Depending on type, motors range in length from 0.81-9.76 in. and achieve holding torque from 10-3,186 oz-in....

Read More »
Stepper Motors

Motion Control System is built on step motor technology.

ServoStep(TM) integrated motion control system features 50-pole step motor, motion controller, drive-amplifier, and encoder. NEMA 34 frame size model delivers continuous torque capability of up to 650 oz-in. and nominal speed of 2,200 rpm. Additional features include RS-485 port, closed-loop control, 14 I/O, and 4 kHz PID filter. Able to be used as stand-alone unit, product offers 4 modes of...

Read More »
Linear Stepper Motors suit medical and HVAC applications.
Stepper Motors

Linear Stepper Motors suit medical and HVAC applications.

Offered as alternative to high-torque linear actuators, UKE Series motors provide 250 N force and IP40 protection and are rated for thermal class A according to IEC 85. They operate in ambient temperatures from -15 to +60Â-ºC and can be mounted in any position. Motors provide 0.031 mm linear travel per step, max linear travel to 30 mm, and a max static force to 500 N. They can be stopped...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers