Stepper Motors

Step Motor incorporates microstepping drive and controller.
Stepper Motors

Step Motor incorporates microstepping drive and controller.

Offered in 3.41, 3.85, and 4.78 in. lengths, SilverPak 23C integrates NEMA 23 step motor, microstepping driver, and controller in single unit. Device operates from +12 to 40 Vdc and delivers 3 A peak output current, 294 oz-in. holding torque, and reaches speeds of 16.7 MHz. Features include programmable ramps and speeds; software selectable hold and move currents; up to 256x microstepping...

Read More »
Intelligent Motor produces up to 85 oz-in. holding torque.
Stepper Motors

Intelligent Motor produces up to 85 oz-in. holding torque.

Integrating bipolar, 1.8° NEMA 17 step motor with microstepping driver/controller, SilverPak 17T is available in body lengths of 2.76, 2.99, and 3.31 in. It features selectable step resolutions from full step to 16x microstepping, output currents of 0.1-1.5 A peak, input voltage of 7-28 Vdc, and 16 Kb of memory. There are 2 digital limit switches, 1 general-purpose input, and 1 open...

Read More »
Stepper Motors

Motor, Driver, and Control handles 12-40 Vdc.

Combining NEMA 23 step motor, microstepping driver, and intelligent controller in one package, Model IMC23 is capable of up to 3 A peak output current, 256x microstepping, and 294 oz-in. holding torque. Unit features fully programmable ramps and speeds, software-selectable hold and move currents, stand-alone operation with no connection to PC, and storage of up to 16 programs at once with 4...

Read More »
Motor and Driver Package includes smooth drive function.
Stepper Motors

Motor and Driver Package includes smooth drive function.

Combining 5-phase stepping motor with low-vibration microstepping driver, CRK Series is available in 0.79, 1.10, 1.65, and 2.36 in. frame sizes. In microstep operating mode, 2.56 x 1.77 x 0.98 in. driver provides 25 preset angle selections up to 250 microsteps per full step. Motors are offered with holding torques from 3.2-230 oz-in. Available with standard tapered hob, planetary, and harmonic...

Read More »
The Next Wave of Intelligent Design Automation
Sponsored

The Next Wave of Intelligent Design Automation

In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.

Read More »
Stepper Motors

Size 14 Modular Step Motors have ±1.5 arc min step accuracy.

Model 3609X measures 36 mm dia x 14.7 mm thick and weighs 2.88 oz, while Model 3609Y is 14 mm thick and weighs 2.56 oz. Both feature holding torque of up to 6 oz-in. and windings encapsulated in thermally conductive, ceramic-based polymer that promotes heat dissipation. Able to be placed in customer-supplied/designed housings, these 0.9° motors are suited for medical, optical, and...

Read More »
Stepper Motors

Stepper Motor is designed for precision system operation.

NEMA size 17, 1.8Â-º stepper motor, Super Torque Model 4118C, has maximum body length of 2.34 in. and is capable of 127 oz-in. of holding torque. Unipolar and bipolar windings are available to allow for torque and speed required to accommodate application. Stepper motor is suited for applications where size is a factor and load capacities are critical to precision system operation.

Read More »
Stepper Motors

Integrated Motor/ Driver/Encoder operates at 15-48 Vdc.

SilverPak 23DE integrated NEMA 23, 1.8° bipolar step motor, microstepping driver, and encoder suits step motor applications needing high torque. Integrated motor/driver produces up to 294 oz-in. of holding torque. Available phase current ranges from 0.3-3 A peak. It has features such as Pole Damping Technology(TM), under-voltage and over-temperature protection, and 4 selectable damping...

Read More »
Hybrid Step Motors are protected to IP65 standards.
Stepper Motors

Hybrid Step Motors are protected to IP65 standards.

Dustproof, splashproof, aStep AS series motor and driver packages never lose synchronization due to embedded rotor position sensor that constantly monitors performance. Protective earth ground terminal is installed on metal connector to motor case, conforming to ISO 12100. At 60 mmÂ-², AS66A and AS69A develop 170.0 and 280.0 oz-in. holding torque respectively, while 80 mm² AS98A and...

Read More »
Stepper Motors

Stepper Motor features 22 mm diameter.

Measuring 22 x 25.9 mm, 2-phase Model AM 2224 achieves output of 2.5 W and peak holding torque of 45 mNm. Versions are available in 3, 6, 12, and 24 V, as well as 0.25 and 0.50 A. Motor processes transmitted control signals with accuracy, allowing angular step of 18°. In open control loop, it can run rotary speed profiles or build up positioning control. After switching off, motor maintains...

Read More »
Stepper Motors

Step Motors exceed IP65 standard.

Based on NEMA 34 frame, Step Motors develop continuous stall torques from 460-2,550 oz-in. and peak output levels to 580 W. Input drive voltages range from 12-48 Vdc. Two round industrial connectors, rated to IP65, are used for encoder and motor signals. All motors are equipped with 16,000 count/rev encoder. Closed loop, servo control is provided by SilverNugget controller/driver.

Read More »

All Topics