New Sockets Products

Test and Burn-In Socket suits applications under 1 GHz.

Designed for use with devices from 14-27 mmÃ-², CSP/MicroBGA pressure-mounted socket requires no soldering and incorporates spring probe contacts, integral plastic alignment posts, and 4-point crown that ensures scrub on solder oxides. Signal path during test is 0.077 in. and operating temperature is -67 to +302Ã-

Center Probe Test Socket suits devices to 13 mm-².

RF test socket incorporates solderless, pressure-mount compression spring probes located by 2 molded plastic alignment pins and secured with 4 stainless steel screws. Suited for devices with pitches of 0.50 mm and higher in applications with speeds from 1-10+ GHz, signal path during test is .077 in. Center probe contact forces are 9-12 g per contact for 0.50-0.75 mm pitches and 17-20 g per...

Low-Profile Socket simplifies board assembly.

Low-profile socket facilitates high-density, side-by-side panel or PCB mounting of IS Series SMARTSWITCH(TM) LCD pushbuttons. SMARTSWITCH(TM) pushbuttons feature high-visibility LCD that can be programmed to display graphics and alphanumeric characters. They can also display animation sequences that prompt operators through series of error-free actuations. Backlighting can be programmed to flash,...

Center Probe Test Socket has floating guide plate.

Machined from Torlon 4203 or 5530, RF center probe socket features floating guide plate with built-in hard stop. Product can be used for packages with 0.50 mm pitch or higher for devices up to 55 mm wide in applications with speeds from 1-10+ GHz. Decoupling pockets can be placed within 1.0 mm of product's solderless, pressure-mount, compression spring probes. Contacts have cycle life of over...

EMI/RFI Shielding Considerations for Electric Vehicles

This white paper provides an overview into EMI/RFI shielding considerations for electric vehicles.

Test/Burn-In Socket accommodates devices up to 13 mm-².

Type BGA/CSP test and burn-in socket handles devices with pitch from 0.50 mm or larger in applications up to 1 GHz. Solderless, pressure-mount, compression spring probes are located by 2 molded plastic alignment pins and secured with 4 stainless steel screws. Socket accommodates up to 500,000 cycles. Spring probe contacts are 9-12 g per contact for 0.50-0.75 mm pitches, and 17-20 g per contact...

Socket/Ratchet Sets deliver SuperTorque-® fastening power.

With low profile design, socket and ratchet sets engage fastener flats for higher torque application. Configurations include: 14-piece, Ã-¼ in. drive set; 12-piece, 3/8 in. drive set; 21-piece, 3/8 in. drive set; 12-piece, Ã-½ in. drive set; and 17-piece, Ã-½ in. drive set. Detents on all socket inner walls ensure tight, positive engagement with drive tool in any orientation. Ratchets...

BGA Socket is side stackable to increase packaging density.

Offered in 2- and 4-bolt hold-down styles, Pin-Ball Socket may be soldered side-by-side, directly to existing footprint of PC board. Surface-mount BGA and LGA socket provides 2 mm clearance for end components. It can be used for 1.00 mm and 1.27 mm pitch packages up to 50 mm in any footprint, on any size board. Socket incorporates spring-probe technology with spring force of 17 g at .025 in....

Dome Sockets are spark proof.

Deep tank-car dome sockets, constructed of manganese bronze, have 1 in. square drive and 4 in. internal depth. Weighing 6 lb each, sockets come in 8-point and hex sizes from 1 7/16 to 1 11/16 in. T-handle wrench is available, and sockets can be used with air impact wrenches.

RF Test Sockets feature conduction-cooled system.

Interposer, Spring Probe, and Microstrip Contact(TM) test sockets are 63.5 x 63.5 x 88.9 mm and can be used in packages up to 27 x 27 mm. They include built-in thermistor and copper heat sink with integrated fan assembly. Conduction-cooling system makes sockets suitable for BGA, LGA, and CSP package designs used in high-powered devices. Temperature range with thermoelectric cooling is 5-194Ã-

Socket Extension Tool provides less twist and more torque.

TORQUE-TUBE(TM) is built of alloy material and finished with black oxide coating. Male and female hardened end pieces are precision welded to high-strength tubular shaft, which stands up to high torque sockets and impact wrenches. Tool is available in 12, 18, 24, and 30 in. lengths of 1/2 in. drive.