New Sensors, Monitors & Transducers Products

Triaxial Force Sensors measure vehicle chassis dynamics.

Series 260A triaxial force sensors measure dynamic and quasi-static forces in 3 orthogonal directions. They feature measuring ranges of 500-4,000 lb in X and Y directions and 1,000-10,000 lb in Z direction. Single axis models are also available. These sensors are used to study vehicle chassis dynamics at interfaces between shock absorbers, struts, or other chassis components.

Ultrasonic Sensors feature 12 mm dia cylindrical housing.

Designed with nickel-plated brass housing, Analog and Switch-Point Ultrasonic Sensors are IP65 protected for operation in dusty or water-overspray applications. They offer adjustable sensing range from 50-400 mm, response time of 50 ms, and 0.17 mm resolution. Units provide 4-20 mA/20-4 mA and 0-10 V/10-0 V analog output, digital programming, quick disconnect cables, and automatic temperature...

Force Sensors suit biomedical tissue product testing.

High sensitivity, Miniature Series 209C Quartz Piezoelectric Force Sensors measure dynamic compression and tensile forces. Built-in microelectronics convert high impedance charge to low impedance voltage, eliminating noise associated with charge amplifiers and allowing broadband resolution 20 Ã-µlb rms from sensor. Featuring ICPÃ-® voltage output, products offer sensitivity of 2,200 mV/lb...

Transmitter simplifies filling and dosing system operation.

Using Micro Motion Coriolis sensors, Micro MotionÃ-® 1500 filling and dosing transmitter integrates into machine control system to directly control pumps and valves. System simplifies batch delivery control loop, eliminating need for separate controllers. Direct, predictive valve control uses measurements of each delivery to optimize control accuracy for subsequent fills, and operator can...

Avoid Pressure Equipment Failure

This eBook gives a guide on how to prevent pressure equipment failure.

Refrigerant Leak Detector is compact and battery powered.

Equipped with 17 in. long, chrome-plated, flexible metal probe, ELD-1000 PRO-Alert utilizes heated-diode sensor technology to detect refrigerant leaks as small as 0.4 oz per year. Dual-sensitivity controls feature high-sensitivity setting for initial check of general leak area and low-sensitivity setting to home in on exact leak site. Sensitive to CFC, HCFC, and HFC refrigerants, portable product...

Gas Detector provides maintenance-free operation.

ALTAIR Single-Gas Detector features sensor options for oxygen, carbon monoxide, and hydrogen sulfide, where latter 2 versions can operate for over 2 years. Protected against dust and water, product comes in rubberized housing, offers one-button operation, and is resistant to RFI. Triple-alarm system features 2 LEDs as well as audible and vibrating alarms. Unit automatically records last 25 alarm...

Voltage Supervisors come in 2.95 x 2.8 mm SOT-23 package.

Designed to monitor microprocessor activity in digital systems, MCP1316, MCP1316M, MCP1317, MCP1318, MCP1318M, MCP1319, MCP1319M, MCP1320, MCP1321, and MCP1322 integrate watchdog timer, manual reset, and multiple combinations of push-pull or open-drain reset outputs in 5-pin package. They operate over -40 to +125Ã-

Digital Speed Sensor features running mode calibration.

Supplied in an SH package, ATS642LSH addresses critical requirements specific to ABS speed-sensing applications. This 2-wire, dual-element, Hall-effect sensor switches in response to differential magnetic signals from ferrous target and can handle airgap variations due to cornering events. Running mode calibration automatically adjusts for miscalibration without missing transition and maintains...

LVDTs have compact, sort stroke design.

Able to interface with control systems and digital/analog conversions, DCTH Series requires no additional signal conditioning and comes in spring operation as well as free, unguided armature versions. Transducers offer linearity to 0.1% max and operate from dc power supplies of 20-24 V single ended or Ã-

Singular Gas Monitor is used in plant shutdowns/turnarounds.

Designed for short-term personal gas monitoring needs, GasBadgeÃ-® Plus provides protection from dangerous levels of carbon monoxide, hydrogen sulfide, oxygen, nitrogen dioxide, or sulfur dioxide. Unit weighs 2.5 oz and employs top-mounted sensor for continuous, unobstructed protection. Along with user-adjustable alarm and calibration gas setpoints, product features event-logger that records...

Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application

Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.