New Sensors / Detectors / Transducers Products

Weld Seam Detector handles tubes from 5-500 mm dia.

Combining digital signal analysis and eddy current technology, PC-based Model SND40 offers graphical user interface with touchscreen, as well as Fieldbus and Ethernet interfaces. It is suitable for tubes made of all metals and is largely independent of tube wall thickness. Detector handles difficult positioning tasks in tube bending machines, hydroforming presses, and other tube processing...

Dissolved Oxygen Sensor suits carbonated beverage process.

Able to withstand caustic clean-in-place cycles, Model Bx438 monitors trace levels of dissolved oxygen in beer and other carbonated beverages. Steel-meshed, double-layer membrane enables sensor to withstand high pressure and temperature while maintaining high diffusion rates. Zero polarization set point ensures accuracy. Changes in flow rates have minimal impact on measurements, so sensor...

Pyroelectric Detectors produce low noise.

Series LMM low microphonic detectors exhibit 20x reduction of detector noise output caused by mechanical vibration. High Gain pyroelectric detectors have responsivity up to 100x over standard detectors without increase in noise. Units are suited for heat and flame detection and gas analysis in applications such as medical, refinery, mining, automotive, and semiconductor instrumentation.

Gas Detection System features multi-channel controller.

Modular IR5000 Open Path Hydrocarbon Gas Detection System combines single-beam, single-source, single-detector sensing design with intelligent multi-channel control. System consists of IR source unit and receiver unit, placed 16-330 ft apart, that measure gases active within IR spectrum. Corresponding output is expressed in parts-per-million meters, and lower-explosive-level meters,...

Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components

A comprehensive exploration of a new wrought copper alloy wire used in powder metallurgical infiltration methods.

Pressure Sensors suit aerodynamic testing and analysis.

Series 103B ICPÃ-® Acoustic Pressure Sensors measure pulsating, transient, and turbulent acoustic phenomena on transportation vehicles and other structures. Built-in signal conditioning microelectronics produce clean, low-impedance voltage output signals. Sensors are offered in 3 configurations: pigtail wire solder connection, 10-32 top connector, and 3-56 side connector. Each is available in...

Laser Nano Sensor measures thickness and roughness.

Using auto focus principles with resolution as fine as 0.7 nm at speeds to 200 kHz, Laser Nano Sensor features spot size of 1-6 microns. It allows for displacement measurement within a few nanometers on quantifying surface roughness of any highly reflective surface. Available in 4 standard models, LNS sensor has measuring range of 0.00016-0.005 in. and operating distance from 0.09-1.0 in....

P/I Transducers withstand hazardous environments.

Models P200 and P290 pneumatic-to-current transducers convert standard 3-15, 3-27, or 6-30 psig air pressures into 2-wire 4-20 or 10-50 mA signal with total accuracy up to Ã-

Grooved-End Pressure Sensor provides pump protection.

Series 43 Pressure Sensor is available for 2, 3, and 4 in. grooved-end piping systems. Pressure switch connection will automatically stop pump and protect housing in case of pressure build-up due to blockage. As pressure is sensed by elastomer sleeve, captive fluid transfers pressure to instrument.

Photoelectric Sensors feature snap-in design.

Self-contained Series SM 3000 consists of separate transmitter and receiver sensors that are used in through-beam mode. With sensing range of 6 m and light immunity of 50,000 lux, units stop doors from closing prematurely, preventing injury to pedestrians and damage to doors. Sensors are housed in cylindrical plastic enclosure with one-piece, snap-in head. Flat lens ensures flush mounting to...

Photometric Detector meets CIE 127-1997 conditions A and B.

Suited for measuring virtually any type of LED-based display, Photometric 127 Sensor features 100 mmÃ-² input aperture and photopic filter that provides less than 1% f1' with individually measured spectral response. It includes CD with calibration data and comparison curves, application notes, and scanned absolute photopic responses. When used with portable IL1400 and benchtop IL1700...

Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions

Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.