
Vacuum Pumps are compact and cool running.
Modular designed KNF N860 Series diaphragm vacuum pumps for sample, transfer, or air and gas evacuation achieve enhanced gas tightness with leak rates at 6 x 10-3 mbar L/s, deep vacuum potential of 2 mBar, and flows as high as 110 L/min. Multi-port valves aid pumps to tolerate condensation without damage, and perform oil-free transfer with uncontaminated flow. Available in both single- or...
Read More »
Dry Vacuum Pump targets semiconductor load lock applications.
Measuring 450 x 230 x 280 mm and weighing 59 kg, Model iXL120 consumes average energy (power at 700 T exhaust pressure) of only 550 W and offers peak pumping speed of 110 m-³/hr. It incorporates oil lubricated precision bearings and timing gears, which reduce vibration during pump operation and when pump is mounted on process tool. Unit includes zero nitrogen purge option for processes without...
Read More »
Dry Pump operates on as little as 3.9 kW input power.
Featuring optimized thermal control and dust handling capability, GXS Dry Pump supports pumping requirements for silicon ingot manufacturing and laminator applications in solar industry. Tapered variable pitch screw profile allows for tight clearances without need for rotor coatings and enables compression variations along rotor axis. Measuring 0.4 x 1.1 x 0.8 m, pump produces less than 64 db(A)...
Read More »Almatec® CX Series Diaphragm Pumps Ideal for Low- to Medium-Duty General Applications
Kamp-Lintfort, Germany - Almatec-®, a premier manufacturer of air-operated diaphragm pumps specializing in plastic pumps with solid housings, has announced that its general-purpose CX Series of Pneumatic Diaphragm Pumps are ideal for low- to medium-duty applications, as well as being used as drum pumps. CX Series pumps have been designed to self-prime and are protected against dry-running. This...
Read More »
Wear - What Wears in Electromagnetic Brakes
Learn the common causes of wear for "fail-safe" brakes and how to prevent wear for safe use.
Read More »
High Pressure Pump offers 250 psig discharge fluid pressure.
Available in stainless steel and ductile iron bolted construction, H800 pump is designed to transfer viscous, solid-laden slurries by utilizing 3:1 pressure ratio of inlet air supply to discharge fluid. It offers max flow rate of 95 gpm, with max inlet air pressure of 85 psig, and includes ringed air valve piston with DIN or ANSI compatible flanges. Unit suits filtration, chemical sludge...
Read More »
Sliding Vane Pumps optionally offer electric heating.
NP Series' 2.5 and 3 in. models support Electric Heating option, which may be used in place of jacketed heads. To accommodate this option, NP2.5 and NP3 models feature 2 additional bosses in gland area of inboard head for drilling of 2 heat pots. Heating pots are drilled and reamed to 12.5 mm and will accept any type of heating element. Additional features include special sleeve bearings,...
Read More »
Dry Screw Vacuum Pumps are virtually maintenance-free.
Providing vacuum down to 1 x 10-3 mbar, GXS Series features service life up to 5 years, even in harsh applications. Pump mechanism can be cleaned using high flow purge and solvent flush accessory, eliminating need to partially strip pump. Shafts are supported at both ends, resulting in optimized dust handling, minimized vibration, and noise levels below 64 dB(A). Applications include lamination,...
Read More »
Sealless Triplex Pumps feature packing-free design.
Featuring double-ended shaft to accommodate various installation options, Hydra-Cell T80 Series employs asynchronous, hydraulically-balanced diaphragms with valve system that allows diaphragms to be hydraulically coupled to displacing plungers with no mechanical coupling required. Zero-leakage units can run dry without damage, will operate with closed or blocked suction line, and can pump...
Read More »
Thomas Series 2665/2685 Pumps for Air Vending Applications
Series 2665/2685 WOB-L-® Piston pumps from Thomas are specially designed to stand up to the rigors of use in coin operated tire inflation pumps and other air vending applications. Series 2665 pumps are for use where fan guards are not required. Series 2685 pumps include stainless steel fan guards. Constructed of light yet rugged die-cast aluminum, Series 2665/2685 pumps incorporate epoxy coated...
Read More »
Thermoplastic Sump Pump has cantilevered, bearingless shaft.
All wetted components of SUMP-GARD-® model SGK-2700 centrifugal pump are molded of solid Polypropylene, PVDF, or CPVC to eliminate chemical attack while minimizing abrasion. Alloy shaft, isolated from fluid contact, transfers torque from 125 hp motor and can employ balanced 14 in. dia impeller. This cantilevered shaft eliminates need for immersed bearings and promotes dependable operation for...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »