New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Miniature Inert Solenoid Pump Designed for Flexibility and Cost Savings

Miniature Inert Solenoid Pump Designed for Flexibility and Cost Savings

WESTBROOK, CT- – The Lee Company’s new LPM Series Inert Solenoid Pump was designed to offer greater design flexibility and significant cost savings to the medical and scientific industries. The LPM pump features a revolutionary port head design that allows tubing connections and manifold mounting. This enables the designer to test the fluidic system using connections to soft 1/16 tubing, and...

Read More »
Turbo Molecular Pumps feature hybrid bearing design.

Turbo Molecular Pumps feature hybrid bearing design.

Measuring 195 mm high, Series TMP-B300 features onboard controller, forced air cooling, and high back pressure resistance of 1,000 Pa. Magnetic-levitated pumps mount in vertical, horizontal, and inverted directions to enable installation in space-constrained environments. Consuming just 180 W, pumps are suitable for analytical research environments where clean and ultra-high vacuum is required...

Read More »
Blackmer® Sliding Vane Pumps Feature the Operational Advantages Required for Shale Oil Transfer Applications

Blackmer® Sliding Vane Pumps Feature the Operational Advantages Required for Shale Oil Transfer Applications

Grand Rapids, MI – Blackmer-®, a global leader in positive displacement and centrifugal pump, and reciprocating compressor technologies, is pleased to announce that its XL, TX and SGL Series Sliding Vane Pumps provide numerous design and energy efficiency advantages that are ideal for operators in the shale oil industry. Oil produced from tight shale formations is much lighter than traditional...

Read More »

Magnetic Drive Gear Pumps handle hot liquids up to 248

Featuring AISI 316 stainless steel housings and internal parts, PTFE or PEEK gears, and totally sealed pump chamber, MG200 Series can transfer corrosive and non-corrosive liquids up to 210 lph, with pressures to 5 bar. Noiseless, pulsation-free units feature 24 V brushless DC motor and Variotronic speed control system. Designed with 1/8 in. NPT female threads on In/Out ports, pumps are suited for...

Read More »
Design & Manufacturing Process of a Coil
Sponsored

Design & Manufacturing Process of a Coil

Because the design and manufacturing of electromagnets are critical to the successful operation of the application, it's important to spend time defining your requirements before purchasing coils for an application. This eBook will guide you through the process of evaluating the application's constraints, identifying the needed specifications, and collaborating with a manufacturer to develop an appropriate coil solution for the application.

Read More »
Filter Pump Announces One of its Most Popular Vertical Pumps, the Penguin Series PSS 316 Stainless Steel Vertical In-Tank Pumps, is Now Available in Titanium

Filter Pump Announces One of its Most Popular Vertical Pumps, the Penguin Series PSS 316 Stainless Steel Vertical In-Tank Pumps, is Now Available in Titanium

Sun Valley, CA 91352 - – Filter Pump diversifies its line of Vertical Pumps with the latest PT Series in Titanium, unsurpassed for use in many industrial applications, proudly manufactured in the United States. Penguin Series PSS and PT Pumps are compact and simple in design, having only one moving part, yet highly efficient with proven performance. These corrosion-resistant all-purpose pumps...

Read More »
Bolt-In AODD Pumps are designed to optimize flow rate.

Bolt-In AODD Pumps are designed to optimize flow rate.

Offered- in 2 and 3 in. sizes with aluminum housings and in 1.5, 2, and 3 in. sizes with stainless-steel housings, Advanced™ FIT Air-Operated Double-Diaphragm (AODD) pumps precisely fit bolt-to-bolt and pipe-to-pipe in existing fluid handling piping systems to increase performance without requiring repiping. Configuration optimizes product containment with NPT or BSPT threads or ANSI or DIN...

Read More »

Valveless, Ceramic Pumps for Mining Pilot Plant Hydrometallurgy

The V-300 Variable Speed Metering System from Fluid Metering, Inc. (FMI) is the Solution for Drift-Free Fluid Control of lixiviant used in mining pilot plant hydrometallurgy.-  Mining Pilot Plants are small scale mining process systems, which generate vital information, which will be, incorporated into the design of larger-scale mining operations. The chemical feed systems used in these pilot...

Read More »
Peristaltic Pump offers user-selectable flow rates.

Peristaltic Pump offers user-selectable flow rates.

Occupying 5 x 4 in.- footprint, Model TPT Mini is self-priming and offers ON-OFF and CW-CCW reversible settings. Flow rates are user-selectable from 7–28 mL/min by selecting from- 4 drives (8, 12, 17, or 25 rpm) and tubing sizes. Design facilitates loading and operation via- 2 plastic slide on/off plastic tubing holders that accommodate tubing replacements or tubing size changes. Also,- 2...

Read More »
Vane Pumps and Motors serve high-pressure applications.

Vane Pumps and Motors serve high-pressure applications.

Veljan T6/T7 single, double, and triple vane pumps provide efficiency and low noise suited for- service in- high-pressure applications. Flange mounted valves, including relief, unloading, and sequence valves, mount directly to pumps or manifolds to reduce number of required plumbing connections. Also available, M4 series vane motors come in C, D, and E frame sizes with range of torque sizes.

Read More »
Sliding Vane Pump handles abrasive liquids. .

Sliding Vane Pump handles abrasive liquids. .

With hardened rotor and shaft, liner, end discs, and vanes, 4 in. Model XLW4A is suitable for use with liquids featuring suspended abrasive particles up to 250 microns at concentration up to 25%. Pump produces flow rates up to 190 gpm at speeds up to 350 rpm, and handles viscosities to 20,000 SSU. Operating at temperatures up to 300-

Read More »

All Topics