New Sunflo P-3400 Pump from Sundyne Features Modular Shaft Assembly
Sunflo Industrial Grade P-3400 Pump is designed for boiler feed, reverse osmosis, well injection and NOx suppression. Unit delivers flows of up to 500 gpm and heads up to 5,200 ft. The pump is equipped with heavy-duty carbon steel frame assembly, newly-designed impeller, heavy bearing system and an improved gear set for transmitting 60-percent increase in torque. Unit’s modular shaft assembly...
Read More »
New D1 High Power Axial Piston Pump is Designed for Extreme Application Environments
D1 Open Circuit High Power Axial Piston Pump is suitable for offshore, marine, and oil and gas markets. Unit comes with four displacement options in 130-260cc, pressure, load sense, power limiting and displacement controls. The pump delivers an output pressure of up to 350 bar continuously and 420 bar intermittently. Unit with integral charge pump allows it to run at speeds up to 2500 rpm.
Read More »
Tandem's Wearable Insulin Delivery Pumps Utilize TOPAS® Cyclic Olefin Copolymer (COC)
Precision Molded Cartridge Parts Deliver Drug Compatibility, High Purity, and Dimensional Control FLORENCE, Ky., April 26, 2018 – Wearable insulin delivery pumps from Tandem Diabetes Care Inc., a San Diego, Calif.-based medical device manufacturer of the only touchscreen insulin pumps in the U.S., use disposable cartridges molded of TOPAS® 8007S-04 cyclic olefin copolymer (COC) from...
Read More »
Coval Introduces LEM+ and LEMAX+ Pumps to Meet Demands for Stronger Power
LEM+ and LEMAX+ vacuum pumps are designed to provide better performance, more compactness, and higher energy savings, compared to the previously commercialized LEM and LEMAX. The flow rates for LEM+ and LEMAX+ are 125 to 385 NI/min and 125 to 200 NI/min, respectively. Both models are optimized for size/power ratio and guarantee easy installation. LEM+ handles porous pieces with rough surface and...
Read More »
A Guide to Quality Control of the SMT Process
The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.
Read More »
ULVAC Introduces New LS Series Dry Vacuum Pumps with Built-In Silencer
ULVAC’s LS Series Dry Vacuum Pumps include LS120A, LS300A, LS600A and LS1200A models with pumping speeds ranging from 120 to 1200 m³/h. Units are designed to deliver high pumping speeds at atmosphere pressure and consume power of less than 0.6 W. LS Series pumps are suitable for production industries such as electronic parts and displays. The built-in silencer keeps the noise level to 61 dB.
Read More »
Graco's New Husky and SaniForce 2150e Pumps are Suitable for Handling Slurries
Husky and SaniForce 2150e Diaphragm Pumps include 1050e and 1040e models. Units are suitable for industries such as food, beverage, personal care and pharmaceutical. Husky and SaniForce pumps are manufactured to FDA standards and reduce the usage of energy by 80 percent compared to air-operated diaphragm pumps.
Read More »
LMI Introduces PD Series Metering Pumps with StayPrime™ Degassing Technology
LMI’s PD Series Chemical Metering Pumps are designed with graphical user intuitive interface that enables user to select, configure and operate. Units feature alarm indicators for tank levels, enhanced software with calibration assist capabilities and functionality to input pumps stokes, estimated volumes and power cycles. PD Series pumps come with FastPrime™ liquid end and optional...
Read More »
New 2SA Vertical Sump Pump is Available in Single or Duplex Type
Allied Pumps’ 2SA Vertical Sump Pump is designed for discharge of drainage, seepage water, effluent and boiler blow down. The unit comes with steel and cast iron basins, grouting frames and pit covers. For applications containing corrosive liquids such as alkalies and acids, units are constructed from special alloys.
Read More »
Pumptec Launches New X-Series Pump
Leading industry manufacturer announces higher flow pump design to expand reach beyond commercial cleaning Anoka, MN (March 19, 2018) - Pumptec, Inc., top pump manufacturer and leading resource to portable cleaning equipment manufacturers in the US, is pleased to announce the release of the X-Series. A patented Quadraplex pump line capable of flow ranges from 4-10 GPM. The new design was...
Read More »
Apollo-AC Electric Piston Pump™ requires low maintenance.
Apollo-AC Electric Piston Pump™ is offered in 101 and 102 models. These units are equipped with 3/8 HP, 24v DC motor that can be installed at any angle horizontal. Model 101 is operated at depths of 122 m with flows of 4.1 lpm whereas 102 at depths to 53.3 m and flows up to 10.2 lpm.
Read More »
Triad's Next-Gen Power Supplies Offer Increased Reliability and Reduced Noise Performance
Triad Magnetics, an established leader in power supply design and manufacturing, is proud to announce their next generation WAU AC and WDU DC Series of power supplies. These linear wall plug-ins offer minimum noise performance without sacrificing reliability or life. See our video to learn more.
Read More »
