New Power Supplies Products

Half Brick DC/DC Converter has 4:1 input voltage range.

Manufactured in 5-sided aluminum case measuring 2.28 x 2.40 x 0.50 in., 50 W VHB50W series is available with 9-36 or 18-72 Vdc inputs and offers efficiencies up to 84%. With output voltages from 3.3-24 V, series is comprised of 10 models with half brick pin-out, 1,500 Vdc isolation voltage, 0.20% line and load regulation, and -40 to +100Ã-

DC/DC Converter Card plugs into standard VME64 backplane.

Single card slot Model 58KS1 provides up to 75 W of output power at full load over operating temperature of -40 to +70Ã-

Switching Power Supplies provide power factor correction.

Featuring U-channel form-factor and Universal Input, Series TPS120P provides single, dual, triple, and quad outputs. Maximum power is 90 W, or 120 W with 30 cfm. Units comply with IEC EN61000-3-2 and have optional cover as well as remote sense. Power supplies include built-in EMI filter, as well as over-voltage, over-load, and short-circuit protection. Applications include telecommunications,...

Switching Power Supplies feature 3,000 Vac I/O isolation.

Accepting input from 90-264 Vac, Series PSP1000 and PSP 1500 Active PFC and Parallel-Capable enclosed power supplies deliver output power of 1,000 and 1,500 W, respectively. Fourteen models provide single outputs from 5-48 Vdc. All include soft-start circuitry, integral EMI filtering, power-good LED indicator, and output adjustment potentiometer. Units operate over ambient temperature range of...

A Quick Guide to MASKING SOLUTIONS

This guide will provide an overview of the different masking options, and provide insight on which to use for your product.

AC/DC Power Supplies operate from -40 to +70-

With 90-264 Vac, 47-63 Hz input voltage, extended temperature Modular Power Supplies are available from 3.3-24 Vdc and 5-30 W, and are offered in PCB, IEC, Chassis and DIN mount case styles. Encapsulated units include inrush current limiting, double-fusing, and EMI filtering. Featuring CE mark and TUV approval, modules are suited for wireless radios, surveillance cameras, avionics, medical...

Switching Power Supply has remote sense/control ability.

Accepting universal AC input, AC/DC Modular Series supports customization and is available in multiple configurations. PFC front-end is rectified into high DC voltage, and then customizable DC output modules transfer for it into all kinds of DC voltages from 1.6-53 V. Offered in 75, 150, and 300 W single-output modules and 100 W dual-output modules, series features short-circuit, over-load, and...

POL Power Modules feature 1.5% output voltage regulation.

Non-isolated, plug-in T2 Series supports step-down dc/dc conversion from 4.5-14 V input with adjustable output voltages down to 0.7 V at output currents up to 50 A, making them suited for IBA applications. TurboTrans(TM) technology enables power supply designer to dynamically tune modules using single external resistor to meet specific transient load requirement, and SmartSync function allows...

Buck Converter Chip Set targets Vcore designs.

Utilizing PowerTrenchÃ-® MOSFET technology, high-side control MOSFET Model FDS6298 and low-side synchronous MOSFET Model FDS6299S optimize space in notebooks using Intel Mobile Voltage Positioning specifications. Chip set features low Qgd of 3 nC at VGS=4.5 V for fast switching, as well as Qgd/Qgs ratio of less than 1 to limit potential for cross-conduction losses. As matched pair, units are...

DC-DC Converters deliver 350 W of power.

With 12 V nominal input, step-up Series F351 provides output voltages of 12, 24, 28, 42, 48, and 56.2 Vdc, making converters suited for battery back-up, automotive, industrial, and Intermediate Bus Architecture applications. Full brick size package, measuring 4.2 x 2.4 x 0.5 in., offers single wire connection, automatic current sharing parallel connectivity for true N+1 redundancy, efficiency of...

DC/DC Controller features programmable output tracking.

Manufactured in 3 mmÃ-² DFN-10 package, LTC3809-1 synchronous step-down controller features 550 KHz frequency and current mode architecture with MOSFET VDS sensing that eliminates need for current sense resistor while delivering efficiencies to 95%. It has input voltage range of 2.75-9.8 V and can operate in Burst ModeÃ-® as well as pulse skipping or forced continuous modes. Features...

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.