Oscillators

Oscillators

Crystal Oscillators suit battery-powered applications.

Available with options for AT, SC, or IT cut crystal design, MOFLP Series OCXOs feature typical power consumption of 120 mA during start-up and under 70 mA in steady-state operation at 25°C for 3.3 Vdc unit. Customers can also specify operating voltage of 5 V, temperature ranges from -40 to +85Â-ºC, and frequencies from 1-125 MHz. Oven-controlled crystal oscillators are offered in...

Read More »
Oscillators

Crystal Oscillator comes in 0.57 in. euro-style packaging.

Offering stabilities of ±5 ppb over temperature, 10 MHz NVG47S OCXO Series supports test equipment, microwave communication systems (both point-to-point and point-to-multipoint), and all cellular base station standards such as GSM, CDMA, and 3G protocols. It features 5-13 MHz operating frequency and phase noise (typical) of -128 dBc at 10 Hz offset.

Read More »
Oscillator suits high-resolution spectroscopy applications.
Lasers

Oscillator suits high-resolution spectroscopy applications.

Argos(TM) single-frequency, continuous-wave optical parametric oscillator (OPO) is capable of continuous tuning from 1.4-2 and 2.4-3.9 microns and linewidth of output has been measured as low as 60 kHz. It operates at room temperature and can produce simultaneous output at 2 wavelengths, with available power between 1-5 W over tuning range. Rugged, fiber-pumped, and compact unit features 5 x 6 x...

Read More »
Oscillators

VCOs deliver plug-and-play frequency control.

Red Box VCO (voltage controlled oscillator) series features 1.25 x 1.25 x 0.58 in. aluminum enclosure with SMA connectors, offering plug-and-play option for integration into any application. Available in narrow- to wide-band frequencies, VCOs are suited for applications such as digital radio equipment, fixed wireless access, satellite communication systems, base stations, personal communications...

Read More »
Oscillators

Crystal Oscillator comes in 0.46 in. low-profile package.

Designed for applications that require close-in noise performance, Model NV45AA ovenized crystal oscillator (OCXO) suits cellular base stations, synthesizers, and test equipment where board-to-board spacing is critical. Available in 5, 12, or 15 V supply options, 12 and 15 V units can achieve 95 dBc/Hz at 1 Hz and 125 dBc/Hz at 10 Hz. RoHS-compliant product features 5-20 MHz operating frequency...

Read More »
Oscillators

Crystal Oscillator targets WiMax base station applications.

Featuring frequency range of 2.43-60.00 MHz, 14-pin FTS310 DIP OCXO meets IEEE 802.15-2004 specification that dictates frequency stability must be better than 8 ppm for 10 years. Phase noise is -125 dBc/Hz at offset of 100 Hz and -145 dBc/Hz at offset of 10 kHz. Measuring 20.8 x 13.2 x 11.0 mm, OCXO operates at 1.0 W at 0°C and 0.6 W at 25°C. Operating temperature is -40 to...

Read More »
Electrical Transmitters

Discera Powers High Reliability Telemetry Transmitters

Provider of Telemetry Transmitters Looks to Discera for Reliability and Accuracy for Frequency Source Market SAN JOSE, CA -- April 09, 2007 -- Discera, Inc., a world leader in CMOS MEMS oscillators, resonators, and provider of next-generation timing solutions, today announced that Tyco Electronics' M/A-COM, a leading provider of wireless radio frequency (RF), microwave and millimeter wave...

Read More »
Low Frequency Oscillator targets portable equipment.
Oscillators

Low Frequency Oscillator targets portable equipment.

Housed in ceramic SMD package measuring 3.2 x 1.5 x 1.0 mm, Model OV-7604-C7 combines 32,768 Hz timing crystal with complete CMOS oscillator circuit. Unit operates from 5.5 V down to 1.2 V with max current consumption of 0.5 Â-µA at 3 V. Featuring max start-up time of 0.5 sec, frequency tolerance of ±20 ppm, and operating temperature of -40 to +85°C, RoHS-compliant oscillator is...

Read More »
Oscillators

RF Oscillator suits radar and instrumentation markets.

Supplied in 2 x 2 x .8 in. package, SR W150 is offered in nominal frequency of 500 MHz, with other frequencies possible from 300-600 MHz. Frequency is stabilized by temperature control and external control voltage, and this ultra low noise source never requires additional calibration. Characteristics include -165 dBc/Hz phase noise at 10 kHz from carrier, -175 dBc/Hz phase noise floor, and...

Read More »
Oscillators

Crystal Oscillators target mission-critical space applications.

Radiation tolerant to 100 kRads (Si) total dose, Model 5116 surface mount Voltage Controlled Crystal Oscillator (VCXO) features ruggedized J-leaded ceramic package architecture and brazed kovar leads, housed in 9 x 14 mm enclosure. With 4 point crystal mount and swept quartz standard architecture for flight models, unit offers choice between Class S or Class B Screening IAW MIL-PRF-55310, 1-85...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers