Oscillators

Oscillators

Comprehensive Offering Key to Ecliptek MEMS Programmable Clock Oscillators First Year Success

Ecliptek Corporation, a leading supplier of frequency products, is pleased to announce the one year anniversary of the EMO family of programmable MEMS clock oscillators, marking the successful launch of full scale production and the assembly of over one million MEMS oscillator devices. Costa Mesa, CA May 14th, 2008 - Ecliptek's programmable MEMS clock oscillators provide component engineers with...

Read More »
Oscillators

Oscillators offer 2.5 V operation and minimized noise levels.

Featuring third-order delta sigma modulator, HCMOS XpressO(TM) oscillators can also operate at same voltage as silicon chips to which they are providing timing, minimizing current and heat generation. They offer frequency range of 0.750-180.000 MHz, stabilities as tight as ±20 ppm, and frequency resolution to 6 decimal places. With operating temperatures of -4 to +158°F, 5.0 x 3.2 mm...

Read More »
Oscillators

Crystal Oscillators exhibit stabilities as low as ±25 ppm.

Including 6 models (C107A, C106A, C105B, C85E, C85F, and C85G), C-Series oscillators come in various package sizes, smallest (model C107A) having footprint of 2.5 x 2.0 mm and frequency range of 1.0-200 MHz. They feature tri-state enable/disable function for power efficiency, and -10 to +60°C temperature range. Designed to yield timing support for advanced wireless and microwave systems and...

Read More »
Oscillators

Crystal Oscillator offers frequency margining at ±5% levels.

Including DS4M125 (125 MHz), DS4M133 (133 MHz), and DS4M200(200 MHz) models, DS4M-XO Series offers 100-300 MHz frequency operation, and enables frequency-margin testing in production environments. Product comes in 5.0 x 3.2 mm ceramic package with integrated crystal, and is suited for PCI, PCI Express II, InfiniBand, and Ethernet applications. Integrating PLL-based oscillator designed using SiGe...

Read More »
VCO operates from 787-805 MHz.
Oscillators

VCO operates from 787-805 MHz.

With control voltage range of 0.3-4.7 V, Model CVCO55CC-0787-0805 features typical phase noise of -122 dBc/Hz at 10 kHz offset, input voltage of 5.0 V with maximum current consumption of 35 mA, and second harmonic suppression of -15 dBc typical. Pulling and pushing are minimized to 0.05 MHz and 0.05 MHz/V, respectively. Offered in 0.5 x 0.5 in. SMD package, unit is suited for digital radio...

Read More »
Oscillators

Crystal Oscillator targets PCI Express applications.

DS4100H 100 MHz, HCSL-output crystal oscillator (XO) features high-frequency, low-noise PLL architecture and high-speed, current-steering logic (HCSL) output as well as LC-PLL circuit. Contained in 5 x 3.2 x 1.49 mm, 10-pin LCCC surface-mount ceramic package, XO provides jitter performance of less than 12 kHz to 20 MHz over -40 to +85°C extended temperature range, while delivering frequency...

Read More »
Crystal Oscillator Modules are offered in 9 versions.
Oscillators

Crystal Oscillator Modules are offered in 9 versions.

PureEdge(TM) NBXxxxx Series uses high Q fundamental mode crystal and analog phase lock loop multiplier to provide single or dual frequency, ultra low jitter and phase noise LVPECL/CML differential output. Units feature noise floor of -163 dBc/Hz at 10 MHz offset, and phase RMS jitter of 0.4 ps. Housed in 5.0 x 7.0 mm SMD package, oscillators are suited for 1x/2x Fibre Channel, SATA, iSCSI, PCIe,...

Read More »
Voltage Controlled Oscillator operates from 827-840 MHz.
Oscillators

Voltage Controlled Oscillator operates from 827-840 MHz.

Supplied in 0.5 x 0.5 in. SMD package, CVCO55CC-0827-0840 has control voltage range of 0.2-4.7 V, typical phase noise of -124 dBc/Hz @ 10 kHz offset, and typical second harmonic suppression of -18 dBc. Input voltage is 5.0 V, with max current consumption of 35 mA, and pulling and pushing are, respectively, minimized to 0.05 MHz and 0.05 MHz/V. Applications include digital radio equipment, fixed...

Read More »
UHF-Band VCO suits test equipment and RF modems.
Oscillators

UHF-Band VCO suits test equipment and RF modems.

V495ME01-LF Voltage Controlled Oscillator for test and measurements applications offers phase noise performance of -113 dBc/Hz at 10 kHz offset and provides average tuning sensitivity of 10 MHz/V, covering bandwidth between 0.4-4.5 V. Operating at temperatures from -40Â-º to +85ºC, RoHS-compliant unit has output power of 1 ± 3 dBm at dc supply voltage of 5 V while drawing 8 mA...

Read More »
Sub-Miniature VCO suits broadband transmission applications.
Oscillators

Sub-Miniature VCO suits broadband transmission applications.

RoHS-compliant, subminiature VCO SMV2165A-LF in S-band features typical phase noise of -90 dBc/Hz at 10 kHz offset. From -40Â-º to +85ºC, it has tuning sensitivity of 148 MHz/V typical and provides output power of 6 ± 3 dBm with 3.3 Vdc supply while drawing 16 mA typical. Unit is contained in SUB-L package measuring 0.30 x 0.30 x 0.08 in. and is suited for automated surface...

Read More »

All Topics