Oscillators

Oscillators

OCXO measures 13.21 x 13.21 mm.

Available in frequencies ranging from 10-30 MHz, Model EX-620 Evacuated Miniature Crystal Oscillator (EMXO) features ruggedized hybrid thick film construction in low profile hermetically sealed 4-pin HALF DIP package which can withstand severe environmental conditions. OCXO offers ±75 x 10-9 temperature stability over -20 to +70°C range, and consumes less than 0.35 W at 25°C and...

Read More »
Oscillators

Clock Oscillator is designed for EMI reduction applications.

With 12-168 MHz and operation temperature range of -40 to 85°C, VSS4 spread-spectrum oscillator operates off 3.3 V and has enable/disable feature to allow clock output to be disabled for board testing. It helps users meet FCC restrictions on amount of EMI allowed for range of communications system and consumer electronics applications. Housed in 5 x 3.2 mm ceramic package, unit is designed...

Read More »
Oscillators

VCXO is designed for harsh environment applications.

Providing Absolute Pull Range of up to ±50 ppm over operating temperature range of -55 to +200°C, VX-400 is suited for extreme temperature environment applications, including oil and gas exploration and industrial process control. It features output frequency of 10-30 MHz, low jitter of less than 0.2 ps rms, and low phase noise of -150 dBc/Hz at 10 kHz offset. Available in 4 pin DIP...

Read More »
Oscillators

VCXOs are designed for PLL and Sonet/SDH systems.

Housed in ceramic SMD packaging, V-Series with low jitter offers support for data storage and transmission applications, including 10 Gigabit Ethernet and Fibre Channel. Model V105A measures 5.0 x 3.2 mm and has frequency range of 1-54 MHz, while models V85E and V85F with 1.5-200 MHz frequency range measure 7.5 x 5.0 mm and 7.0 x 5.0 mm, respectively. With PECL/LVDS outputs, models V85G and V85H...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
VCO features phase noise of -108 dBc/Hz at 10 KHz offset.
Oscillators

VCO features phase noise of -108 dBc/Hz at 10 KHz offset.

VCO model CLV1370A-LF in L-band operates from 1,360-1,380 MHz with tuning voltage range of 0.5-4.5 Vdc. It is designed to operate at 5 Vdc, drawing 18 mA typical over -40Â-º to +85ºC temperature range. Typical 2nd harmonic suppression is -20 dBc. RoHS-compliant device comes in standard MINI package measuring 0.50 x 0.50 x 0.22 mm and is available in tape and reel packaging for...

Read More »
Oscillators

MEMS-Based Oscillator withstands up to 100,000 g shock.

Utilizing high stiffness micromechanical resonator, Model VMEM5Q is available from 1-130 MHz with 100 ppm and 50 ppm stabilities and temperature range of -40 to 85°C. Oscillator operates off 3.3 V supply and has enable/disable feature to allow clock output to be disabled for board testing. Housed in 5 x 3.2 mm QFN package, device meets MIL-PRF-55310 standard and is suited for manufactures...

Read More »
TCXO is intended for battery-powered mobile applications.
Oscillators

TCXO is intended for battery-powered mobile applications.

Featuring G-sensitivity of less than 1 x 10-9 and phase noise of -155 dBc/Hz, T77 TCXO is available at 5.0 V, 3.3 V, or 3.0 Vdc supply voltage and within frequency range of 10-50 MHz. It is offered in 5 x 7 mm ceramic package stable to ±0.5 ppm -40 to +85°C with current consumption down to 1 mA typical. Incorporating Statek Corporation Crystal, high precision quartz based oscillator...

Read More »
Coaxial Resonator Oscillator comes in .38 x .38 in. package.
Oscillators

Coaxial Resonator Oscillator comes in .38 x .38 in. package.

Housed in SMD package, Model CVCO38CC-3660-3700 operates from 3,660-3,700 MHz with tuning voltage of 0.3-4.7 Vdc and typical phase noise of -108.69 dBc/Hz at 10 kHz offset. It exhibits output power of +4.0 dBm into 50 W load with supply of +5.0 Vdc and typical current consumption of 30 mA. Pushing and Pulling are minimized to 1.0 MHz/V and 2.5 MHz, respectively. Applications include digital radio...

Read More »
Oscillators

Clock Oscillator offers 1 ps rms maximum jitter performance.

With 3.2 x 5.0 mm size, M2060 Series LVPECL oscillator provides integrated phase noise of 12 kHz to 20 MHz and frequency stability to 25 ppm over temperature range of -40 to 85°C in frequencies to 212.500 MHz. Applications include mobile wireless communications, SONET/SDH/DEWM/ATM, 1G/2G/4G/10G fiber channel, 1G/10G gigabit Ethernet, storage area networks, digital video, phase locked loops,...

Read More »
VCO operates from 1,000-1,500 MHz.
Oscillators

VCO operates from 1,000-1,500 MHz.

Available with control voltage range of 0.5-4.5 V, CVCO55CW-1000-1500 VCO features typical phase noise of -95 dBc/Hz @ 10 kHz offset, input voltage of 3 V, with max current consumption of 15 mA. Pulling and pushing are at 2 MHz and 3 MHz/V, respectively, and second harmonic suppression is -15 dBc. Offered in 0.5 x 0.5 in. SMD package, device is suited for use in applications such as digital radio...

Read More »

All Topics