Oscillators

Oscillators

Crystal Oscillators target 10 GbE, PON, and SAS applications.

Providing timing reference of up to 220 MHz, 2.5/3.3 V SX/SN series and 3.3 V SD/SH series XP crystal oscillators offer 0.25 psec rms phase jitter for high-frequency 2.5 and 3.3 V CMOS/PECL clock applications. Units use bulk acoustic wave crystal devices for optimized stability performance. Also, products are drop-in compatible with Overtone-, SAW-, and PLL-based oscillators in 4-pin 5 x 7 mm,...

Read More »
S-Band Oscillator features ultra low phase noise.
Oscillators

S-Band Oscillator features ultra low phase noise.

Operating from 3,140-3,180 MHz with tuning voltage of 1-4 Vdc, Model CRO3160B-LF features typical phase noise of -110 dBc/Hz at 10 kHz offset and typical tuning sensitivity of 23 MHz/V. RoHS-compliant unit delivers typical output power of 4.5 dBm at 5 Vdc supply while drawing 25 mA over temperature range of -40 to 85°C. Housed in MINI-16-SM package measuring 0.5 x 0.5 x 0.22 in., voltage...

Read More »
C-Band VCO features ultra low phase noise.
Oscillators

C-Band VCO features ultra low phase noise.

Operating from 6,590-6,610 MHz with tuning voltage range of 0.5-4.5 Vdc, CRO6600Z features typical phase noise of -102 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 18 MHz/V. It is designed to deliver typical output power of 3 dBm at 5 Vdc supply while drawing 150 mA (typ, due to doubler) over 0 to +85Â-ºC range. VCO features typical second harmonic suppression of -50 dBc and...

Read More »
Oscillators

Ecliptek Offers New High Frequency VCXO's Ideal for Low Jitter Applications

Costa Mesa, CA - Ecliptek Corporation is pleased to announce the addition of several new frequencies for its line of high frequency 3.3VDC LVDS and LVPECL ceramic surface mount 5mm x 7mm voltage controlled oscillators (VCXO). The E32D1 (LVPECL output) and EL32D1 (LVDS output) are available in a variety of configurations including frequency stability as low as ±25ppm maximum and an operating...

Read More »
Oscillators

Ecliptek Expands Frequency Range of Low Jitter Oscillators

January 28, 2009 Costa Mesa, CA - Ecliptek Corporation is pleased to announce that the frequency range for its line of high frequency LVDS and LVPECL ceramic surface mount 5mm x 7mm oscillators is being increased to 312.500MHz. The E13C7 / E15C7 (LVPECL output) and EL13C7 / EL15C7 (LVDS output) are available in a variety of configurations including frequency stability as low as ±20ppm...

Read More »
S-Band VCO offers optimized second harmonic suppression.
Oscillators

S-Band VCO offers optimized second harmonic suppression.

Operating from 3,565-3,568 MHz with tuning voltage range of 0.5-4.5 Vdc, CRO3567A-LF features typical phase noise of -112 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 8 MHz/V. RoHS-compliant product delivers typical output power of 3 dBm at 5 Vdc supply while drawing 17 mA (typ) over -40 to +85Â-ºC range. VCO features typical second harmonic suppression of -40 dBc and comes in...

Read More »
VCO operates from 2,745-2,860 MHz.
Oscillators

VCO operates from 2,745-2,860 MHz.

With control voltage range of 0.5-4.5 V, CVCO55CC-2745-2860 features typical phase noise of -106 dBc/Hz at 10 kHz offset and output power of +4 dBm. With input voltage of 5 V, VCO consumes max current of 35 mA. Pulling and pushing are minimized to 0.8 MHz and 1.3 MHz/V, respectively, and second harmonic suppression is -15 dBc, typ. Unit comes in 0.5 x 0.5 in. SMD package, and suits applications...

Read More »
LVPECL VCXO has 0.75 MHz to 1.0 GHz frequency range.
Oscillators

LVPECL VCXO has 0.75 MHz to 1.0 GHz frequency range.

Available in 7 x 5 mm package, 2.5 V LVPECL VCXO, FVXO-PC72 oscillator suits SONET, Ethernet, storage area network, broadband access, microprocessors, DSPs, FPGAs, industrial controllers, test and measurement equipment, and fiber channel applications. RoHS compliant product employs third-order Delta Sigma Modulator which helps reduce noise levels. It also offers frequency resolution to 6 decimal...

Read More »
Oscillators

HCMOS Oscillator operates in range of 0.75-50 MHz frequency.

Measuring 2.5 x 2.0 mm, RoHS-compliant F210 series with input current of only 2.5-5.0 mA suits environment with minimal air circulation, such as compact consumer electronics and weather-proof enclosures. Featuring standby function, unit consumes up to 10 Â-µA of current. It offers stability from ±25-±100 ppm across operating temperature range of -10°C to +70°C, with...

Read More »
VCO comes in 0.5 x 0.5 in. SMD package.
Oscillators

VCO comes in 0.5 x 0.5 in. SMD package.

Suited for applications such as digital radio equipment, fixed wireless access, satellite systems, and base stations, CVCO55CC-2770-2920 operates from 2,770-2,920 MHz with control voltage range of 0.5-4.5 V. VCO features typical phase noise of -106 dBc/Hz @ 10 kHz offset and output power is +4 dBm. Input voltage is 5V, with max current consumption of 35 mA. Pulling and pushing are minimized to...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers