Oscillators

OCXO comes in 9 x 14 mm SMTpackage.
Oscillators

OCXO comes in 9 x 14 mm SMTpackage.

FC100 Series of 3.3 V CMOS or Clipped Sinewave OCXO is suited for 3G, Stratum 3, GPS and femtocell applications in standard frequencies of 10, 13, 19.2, 19.44, 20, 26 and 38.88 MHz. Device is stable at less than 200 ppb frequency offset over 0-70°C with low phase noise of -145 dBc at 10 kHz offset for 20 MHz carrier frequency.

Read More »
Optical Parametric Oscillator tunes in range of 340-2.500 Nm.
Lasers

Optical Parametric Oscillator tunes in range of 340-2.500 Nm.

Targeted at advanced imaging and spectroscopy applications, Iris(TM) delivers greater than 1 W of average power from 340-520 nm and greater than 400 mW from 490-750 nm. Device features full automation for computer-controlled tuning across range without adjustment or change of optics. It provides adjustable pulse widths from 80-350 fs. Multiple output ports for simultaneous UV, visible and...

Read More »
S-Band VCO features phase noise of -115 dBc/Hz at 10 kHz.
Oscillators

S-Band VCO features phase noise of -115 dBc/Hz at 10 kHz.

Operating at 2,780 MHz with tuning voltage range of 0.5-4.5 Vdc, Model CRO2781A-LF features typical tuning sensitivity of 9 MHz/V. Unit delivers output power of 7.5 dBm at 5 Vdc supply while drawing 19 mA over temperature range of -40 to 85°C. Housed in MINI-16 package measuring 0.5 x 0.5 x 0.22 in., RoHS-compliant oscillator features typical 2nd harmonic suppression of -18 dBc and is...

Read More »
L-Band VCO offers low phase noise at 1,220 MHz.
Oscillators

L-Band VCO offers low phase noise at 1,220 MHz.

Operating at 1,220 MHz with tuning voltage of 0-5 Vdc, Model CRO1220A-LF features typical phase noise of -118 dBc/Hz at 10 kHz offset and typical tuning sensitivity of 2 MHz/V. Unit delivers output power of 3 dBM at 5 Vdc supply while drawing 18 mA over temperature range of 0-70°C. Housed in 0.5 x 0.5 x 0.22 in. MINI-16 package, RoHS-compliant oscillator features typical 2nd harmonic...

Read More »
Considerations for Choosing a Plastic Injection Molder
Sponsored

Considerations for Choosing a Plastic Injection Molder

Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.

Read More »
VCO operates at 2,500-2,625 MHz with low phase noise.
Oscillators

VCO operates at 2,500-2,625 MHz with low phase noise.

Model CRO2562A-LF in S-band features tuning voltage range of 0.5-4.5 Vdc, typical phase noise of -100 dBc/Hz at 10 kHz offset, and typical tuning sensitivity of 42 MHz/V. Delivering typical output power of 6 dBm at 5 Vdc supply, it draws 27 mA over temperature range of -40Â-º to +85ºC. It also features 2nd harmonic suppression of -18 dBc. Available in 0.5 x 0.5 x 0.22 in. MINI-16...

Read More »
Oscillators

Spread Spectrum Clock synchronizes 8 switching regulators.

Offered in MS16 Package, LTC6909 reduces peak radiated EMI and promotes control (enable/disable/phase-synchronize) of switching regulators in multiphase power supplies. Precision silicon oscillator has 8 separate outputs, providing up to 8 rail-to-rail 50% duty cycle clock signals. Using 3 logic inputs, output phase relationship can be configured from 45-120°. Single resistor selects output...

Read More »
VCO operates from 2,400-2,569 MHz.
Oscillators

VCO operates from 2,400-2,569 MHz.

Offering control voltage range of 0.5-4.5 V, CVCO55CC-2400-2569 VCO features typical phase noise of -102 dBc/Hz at 10 kHz offset. Output power is typically +4 dBm and input voltage is 5 V, with maximum current consumption of 35 mA. Pulling and pushing are minimized to 2.5 MHz and 1.5 MHz/V, respectively, while unit has second harmonic suppression of -15 dBc typical. It is contained in 0.5 x 0.5...

Read More »
L-Band VCO suits fixed wireless and test/measurement jobs.
Oscillators

L-Band VCO suits fixed wireless and test/measurement jobs.

Operating at 1,560 MHz with tuning voltage from 0-5 Vdc, ZRO1560A1LF features typical phase noise of -121 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 0.7 MHz/V. RoHS-compliant VCO delivers typical output power of 0 dBm at 5 Vdc supply while drawing 18 mA (typ) over -40 to +85Â-ºC range. Supplied in 0.5 x 0.5 x 0.22 in. MINI-16 package, product offers typical second harmonic...

Read More »
Oscillators

Ruggedized, SMT TCXO suits aerospace/defense industries.

Supplied in 7 x 9 mm surface-mount (SMT) package, TX-600 temperature controlled crystal oscillator (TCXO) meets timing specifications required by radio, GPS telemetry, and Stratum 3 applications over full range of military specified environmental conditions. RoHS-compliant product utilizes discrete oscillator circuit, optimizing phase noise performance and enabling operation up to 100 MHz, and...

Read More »
C-Band VCO suits satellite, microwave radio applications.
Oscillators

C-Band VCO suits satellite, microwave radio applications.

Operating from 4,030-4,070 MHz with tuning voltage from 0-5 Vdc, SMV4051A-LF features typical phase noise of -83 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 55 MHz/V. RoHS-compliant VCO delivers typical output power of 2.25 dBm at 5 Vdc supply while drawing 18 mA (typ) over -10 to +70°C range. Supplied in 0.3 x 0.3 x 0.08 in. SUB-L package, product features typical second...

Read More »

All Topics