New Space Qualified Crystal Oscillators are High Shock (20,000 g) Resistant
Oscillators are 50kRad (Si) total dose ionization radiation hardened. QT735 series available in CMOS, LVDS and LVPECL versions with input voltages up to 5.0 Vdc and selectable frequencies from 1.000 to 250 MHz. QT723 Series offers models with user-prescribed 1.500 to 250 MHz, tri-state CMOS outputs powered by an input voltage of 1.8, 2.5 or 3.3 Vdc.
Read More »
Saelig Presents Euroquartz EME32T Series Crystal Oscillators for Low-Power Clocks
Available in 4-pad ceramic SMD package with selection of optional supply voltages such as 1.8V, 2.5V, 3.0V, 3.3V and 5.0. Features a frequency stability of ±5ppm over -40 to +85°C temperature range with current consumption as low as 0.79uA at 1.8V. Offers CMOS output logic with load of 15pF, 100 ns maximum rise time and fall time and a duty cycle of 50% ±10%.
Read More »
Saelig Introduces OC51T Series of Oscillators Available in 10MHz to 40MHz Frequencies
Available in a 9.7 x 7.5 x 4.1mm miniature 4-pad package with 3.3 and 5.0V supply voltage options. Output is specified with a 7ns maximum rise and fall time (20-80% of a waveform), an output load of 15pF, a duty cycle of 50% ±5%, with a power dissipation of 0.4W. Ideal for use in applications such as radio transmitters, cellular base stations, military communications equipment and also for...
Read More »
Microchip Technology Inc. Introduces Industry's Smallest Clock Generator
In an effort to reduce application size and extend battery life, Microchip Technology Inc. has introduced the industry's smallest MEMS clock generator as part of the DSC613 clock family. The generator eliminates the need for an external crystal by integrating a low-power and high-stability Micro-Electro-Mechanical Systems (MEMS) resonator. The DSC613 is a single-chip solution with...
Read More »
A&D MRO: Strong Tailwinds
Check out this overview of the Maintenance, Repair and Operations (MRO) segment of the Aerospace and Defense (A&D) industry along with the factors impacting its continued growth.
Read More »
Murata Introduces WMRAG Series MEMS Resonator with Stable Frequency Characteristics
The WMRAG Series 32.768 kHz MEMS Resonator is designed for use in IoT and wearable applications. The resonator features an in-built 6.9 pf capacitor. The device can be operated in -30 to 85°C temperature range with temperature drift of <160 ppm and delivers an initial frequency accuracy of ±20 ppm. The product is offered in silicon-based wafer-level chip scale packaging with 0.9 x 0.6 x 0.3 mm...
Read More »
New T1254 Series Crystal Oscillator is Designed for Low Orbit Satellite Applications
Greenray’s T1254 Series Temperature Compensated Crystal Oscillator is available from 10 to 50 MHz in 20.3mm x 12.7mm DIP package. Unit features an acceleration sensitivity of less than 7x10^-10/g and provides CMOS output. The oscillator can be operated in -40 to +105°C and is stored in -65 to +125°C temperature. Unit meets vibration (MIL-STD-883, Meth 207, Cond A) and shock (MIL-STD-883, Meth...
Read More »
QuikXO HC_JF Series Crystal Oscillators offer maximum phase jitter 150 fs.
Saelig’s QuikXO HC_JF Series Crystal Oscillators are offered in CMOS, CML, HCSL, LVPECL or LVDS versions with choice of 1.8, 2.5 or 3.3 V. Units provide frequency stability specifications of ±25, ±50 and ±100ppm with frequency selection timing is specified at 2.5 ms maximum. Oscillators come in 8-pad, 7 x 5mm surface mount packages and features start-up time of 5ms typical. These units are...
Read More »
Gunn Diode Oscillators feature self-locking tuning screws.
Gunn Diode Oscillators are available in PEWGN1001 (K-band) and PEWGN1000 (Ka-band) models. Units offer a phase noise as low as -98 dBc/Hz typical at 100 KHz offset and a frequency stability as low as -0.2 MHz/°C maximum. PEWGN1001 and PEWGN1000 generate center frequency of 24.125 GHz and 35 GHz respectively. Oscillators are operated in -40°C to +85°C temperature range with +5 to +5.5 Vdc bias...
Read More »
Phase Locked Oscillators feature TTL lock detect output.
Pasternack’s Phase Locked Oscillators are offered in 50, 100, 500, 1000, 2000, 4000 and 6000 MHz frequencies. Used as phase locked loops, frequency synthesizers, function generators and local oscillator, units are compliant to RoHS standards. Operated in -30°C to +70°C temperature range with single positive DC voltage supply, oscillators offer a phase noise of -105 dBc/Hz at 10 KHz offset and...
Read More »
I2C-Programmable Crystal Oscillators are suitable for 56 Gbps transceiver designs.
Si544/Si549 Ultra Series™ I2C-Programmable Crystal Oscillators are offered in 3.2 mm x 5 mm and 5 x 7 mm packages. Units offer jitter performance below 95 femtoseconds and are suitable for 100/200/400G communications and data center applications. Products provide frequency from 200 kHz to 1.5 GHz and can be powered using single 1.8, 2.5 or 3.3 V supply. These oscillators use low-jitter...
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
