New Motors Products

Step Motor has -

Model 3609V modular step motor, available in housings required by unique applications, has 36.3 mm dia and is 19.8 mm wide. Capable of up to 16 oz-in. holding torque, 0.9Ã-

Brushless DC Motor produces 44 oz-in. torque at 5,500 rpm.

Model 000-0229 measures 2 in. OD x 1.25 in. long. Stator is molded using encapsulation process, which protects windings from handling damage while facilitating heat dissipation. Rotor is inherently balanced by ring-magnet construction and can be magnetized in variety of pole configurations to optimize torque output with minimal cogging torque.

Linear Motor is designed for use in biomedical equipment.

Low-inertia, direct-drive Micro Linear motor is suited for precision positioning and scanning applications. Tubular construction, with 0.016 in. symmetrical air gap between fixed and moving components, eliminates friction and wear. Unit completes repetitive 1 mm X-Y movements with 1 micron accuracy in 25 msec. Available with peak force from 19-45 N, motor offers peak acceleration ranges from...

DC Motors/Gearmotors feature 7-slot skewed armatures.

LO-COGÃ-® Series 8000 brush-commutated DC motors and gearmotors minimize magnetic cogging, promoting smooth, quiet operation. Motors come in 3 lengths and achieve peak torques up to 16.4 oz-in. and speeds to 10,650 rpm. Series GM8000 gearmotors are offered in 3 lengths with 11 ratios from 6.3:1 to 1803.6:1. They achieve peak torques to 100 oz-in. standard or 160 oz-in. with high-torque...

Hemp: An Eco-friendly Substitute for Cotton and Petroleum-based Synthetics

To learn more about hemp's history, composition, performance, and its sustainability and cost, download this white paper now.

Motor Set allows performance comparisons.

Set of 4 same-size motors, measuring 80 mm OD by 35 mm stack length, includes 3-phase ac induction motor, 3-phase brushless PM synchronous motor, 3-phase switched reluctance motor, and 3-phase synchronous reluctance motor. Each is housed in aluminum die-cast frame with common mounting bracket. Optical encoder is provided for commutation events. Continuous output power ranges from 100-250 W...

Servo Motors suit food and beverage industry.

Food-grade MP Series Motors offer continuous stall torque of 14-176 lb-in. and include shaft seal with hardened wear sleeve. They are IP66- and IP67-rated with stainless steel motor shaft and fasteners providing corrosion resistance and protection against liquid contamination. IP67-rated connectors can be rotated 180Ã-

Stainless Steel Motors withstand washdown environments.

WashguardÃ-® SST(TM) range from 1/3 to 2 hp and 1,750 and 3,450 rpm. All external surfaces such as frames, endbells, mounting base, fan guard, hardware, conduit box, and cover are 300 series stainless steel. Oversized, double-sealed bearings are pre-lubricated with moisture-resistant high-temperature grease. Stainless steel T-drains are provided for drainage of condensation while preventing...

Motor/Controller Kit offers fully programmable functions.

Simple Step 17 with Designer's Kit includes integrated motor, RS485-RS232 converter card, db-9 female connector cable, switch push button, Opto Sensor, 4-pin connector for converter card, extra wiring for I/O, and CD-ROM. Motor offers automatic execution of stored commands upon power up, fully programmable ramps and speeds, bipolar control, 2 digital I/O and 2 fixed input channels, and up to 85...

Brushless DC Motor is suited for machine tool spindles.

Utilizing voltage of 370 V, 21,000 rpm motor is vibration-free due to its dual plane rotor balancing. Motor design features oversize front and rear bearings and secondary, internally-independent, Hall device tachometer arrangement. Motor measures 7 in. long with 4.875 in. dia and produces up to 14.2 lb-in. of torque at 21,000 rpm; slower speeds yield up to 15 lbs-in. of torque. Product is suited...

Air Motors withstand harsh and hazardous environments.

Non-lubricated Dynatork Air Motors use air supply up to 100 psi, which is controlled through integral, rotary valve. Valve sequentially directs air to 3 pistons. Pistons drive a crank that turns outlet shaft. Resulting high torque and variable low speed, with instant start/stop output, makes motors suited for paint- and other liquid-stirring applications. Housing is cast aluminum and piston is...

ISO-Certified Precision Machining and Contract Manufacturing Services from DFF

DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.