Microstep Motor has outside diameter of 4 mm.
Designed for use in medical, optical, and fiber optic communications applications, LPD4 dual-phase, permanent magnet, micro-sized stepping motor has overall axial length of 8.3 mm. It can produce pull-out torque to 11 milli-oz-in. @ 1,875 rpm and holding torque to 23 milli-oz-in. Max unloaded pull-in speed for 3 Vdc motor is 6,000 rpm, and step angle is 22.5Ã-
Read More »Brushless Motor suits closed-loop positioning applications.
Equipped with 0.75 in. OD X 3.4 in. long stainless steel housing, dc motor is capable of delivering peak torque of 10 oz-in. with 3.6 A @ 7,000 rpm. Mechanical time constant is 1.43 msec, and electrical time constant is 0.15 msec. Rotor inertia of 2.8 X 10-5 oz-in.-secÃ-² facilitates acceleration and deceleration. Motor also has 96-line, 2-channel quadrature encoder for positioning accuracy....
Read More »Reflow Vibrator Motor has low-profile, mid-mount design.
Measuring 13.6 x 6 x 4.4 mm (or 2.2 mm mounted through PCB) and weighing 1.3 g, motor can be mounted under taller housing components, such as battery. Standard load speed is 8,500 Ã-
Read More »A Comparative Guide to Sweeteners in the Food and Beverage Industry
To learn more about the benefits of agave over other sweeteners, and how Come Alive Organics can help source your needs, download now.
Read More »DC Gear Motor accepts any 90 Vdc power source.
Equipped with 180:1 gear ratio, Model MMP.PDSF80-90V.180 is rated for 70 lb-in. continuous torque at 0.9 A of current. Unit measures 2.8 in. dia x 6 in. long with 80 mm square gearbox. Measuring 10 mm dia, output shaft is provided with square shaft key and keyway. Mounting is accomplished with 4 in. face mount threaded screws, 68 mm apart. Options include integral optical encoders, failsafe...
Read More »Open-Loop Stepping System controls position and speed.
SureStep(TM) includes 4 motors and one-size-fits-all step motor drive. With holding torques from 83-434 oz-in. in NEMA size 17, 23, or 34 frames, motors operate from 2.8 A/phase. Two-phase, bipolar motors have 200 full steps/revolution or 1.8Ã-
Read More »Reversible DC Gear Motor offers output speed of 160 rpm.
Accepting any 12 Vdc power source including batteries, Model MMP.PDSF80-12V.018.1 measures 2.8 in. diameter x 5.6 in. long with 80 mm square gearbox. Output shaft is 10 mm diameter, and is provided with square shaft key and keyway. Equipped with 18:1 gear ratio, motor is rated for 26 lb-in. of continuous torque at 3.9 A of current, and is capable of 70 lb-in. of peak torque. Mounting is...
Read More »DC Servo Motor includes integral analog tachometer.
Measuring 2.14 in. dia x 5.96 in. long with 0.375 in. dia stainless steel output shaft, Model MMP-C21.175E-24V.T-03 requires 3.4 A at 24 Vdc to generate full power. Integral tachometer provides positive, linear feedback signal for closed-loop servo applications at rate of 3 Vdc per 1,000 rpm of rotation. Delivering 80 W of continous output power at 5,000 rpm, motor is rated for 30 oz-in. of...
Read More »Custom Step Motors have 0.9-
Available with 4 or 6 leads, NEMA 14 steppers for OEMs allow users to specify motor length, windings, and mountings in addition to type, color, and length of lead wires and connectors. Other options include choice of bearings and custom shafts (single or double, length, flats, pinions, keyways). Typical 4.5 V, 0.9Ã-
Read More »Stepper Motor features 0.9-
Available in lengths of 0.92, 1.10, 1.38, and 1.54 in., NEMA Size 17 High Accuracy Motor is capable of holding torques from 12-30 oz-in., depending on length. Emitted inertia is between 0.07-0.13 oz-inÃ-². Unipolar and bipolar windings are available to allow for torque and speed required to accommodate specific needs. Motor is suited for microstepping control in applications such as...
Read More »Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »