Brushless DC Motor produces peak torque of 690 oz-in.

Brushless DC Motor produces peak torque of 690 oz-in.

Providing continuous torque rating of 230 oz-in., 8-pole NEMA 23 Motor is suited for robotic drive systems, medical equipment, and other automation applications where high torque-to-weight ratio is important. Variety of electrical and mechanical options are available including enclosed encoder and sealed design for IP65 wash down requirements. Custom mounting and winding configurations are also...

Read More »

Motors/Gearmotors feature built-in, pre-wired encoders.

Incodermotors(TM) are permanent magnet dc and brushless dc motors and gearmotors equipped with internal encoders. Able to work with digital tachometers or other electronic devices to measure speed, distance, and direction, 4.5-12 V magnetic encoders are available with one or 2 Hall sensor output signals in resolutions of 2, 4, 8, and 30 pulses/revolution. Type 33A and 42A permanent magnet dc...

Read More »
Direct Drive Motors deliver up to 10,000 rpm speed.

Direct Drive Motors deliver up to 10,000 rpm speed.

Suited for optics applications and direct drive rotary table systems, ULT Series direct drive frameless motors are available in sizes down to 27 mm dia with axial length as low as 8 mm and up to 20 mm through hole. They operate from traditional 3-phase trapezoidal or sinusoidal motor controllers ranging from 12-320 Vdc. Units can be utilized for precision positioning with use of high resolution...

Read More »

Internal Rotor Motors fit space-restricted applications.

Available in 40 mm diameter and 2 lengths of 26 and 36 mm, EC-i Motors use high-powered permanent magnets for speed stability under load. Brushless, electronically commutated units feature minimal detent and are suited for applications that require maximum drive in minimum space such as robotics, industrial automation, and security technology.

Read More »
Design & Manufacturing Process of a Coil
Sponsored

Design & Manufacturing Process of a Coil

Because the design and manufacturing of electromagnets are critical to the successful operation of the application, it's important to spend time defining your requirements before purchasing coils for an application. This eBook will guide you through the process of evaluating the application's constraints, identifying the needed specifications, and collaborating with a manufacturer to develop an appropriate coil solution for the application.

Read More »

SMD Micro Motors suit small device vibration applications.

Featuring 3.4 mm profile, BSY Series DC Motors are 11 mm long with typical speed of 14,000 rpm and mechanical noise of 45 dB max. Standard operating voltage is 2.7 Vdc and load current is approximately 65 mA. Intended for applications requiring small footprint on surface mount circuit board, units are suited for mobile phones and consumer medical devices as well as medical and other applications.

Read More »
Danaher Motion's Patented CARTRIDGE DDR(TM) Motors Now Available in Five Frame Sizes for Unrivaled Application Flexibility and Performance

Danaher Motion's Patented CARTRIDGE DDR(TM) Motors Now Available in Five Frame Sizes for Unrivaled Application Flexibility and Performance

Performance of frameless DDR technology + simplicity of a full frame motor = mount and run operation in minutes WOOD DALE, IL - Danaher Motion has added three frame smaller sizes to their family of innovative CARTRIDGE DDR(TM) direct drive rotary servomotors. Now available in five frame sizes ranging from 4.25 in. square to 13.78 in. square with four stack lengths per frame, CARTRIDGE DDR motors...

Read More »
Brushless DC Motors provide continuous torque to 40 oz-in.

Brushless DC Motors provide continuous torque to 40 oz-in.

ELCOM STÂ-® Series N2300 slotted brushless DC motors incorporate internal Hall sensor feedback for linear speed-torque characteristics, and variable speed control with control electronics. Motor features 6-slot lamination design and mount configuration that is consistent with NEMA 23 standards. At 2.3 in. in diameter, motors are available in standard stack lengths of Â-½,1,1Â-½, and 2...

Read More »
Pancake Motor provides up to 120 oz-in. of torque.

Pancake Motor provides up to 120 oz-in. of torque.

Designed with gear train that is built inside rotor to provide thin profile, Planetary Gear Train Pancake Motor measures 18.5 mm thick and 80 mm in dia. Available with 3.75-° step angle and 4:1 gear ratio, unit is suited for applications with limited space that require accurate positioning and high torque.

Read More »
TEFC Motors suit general-purpose applications.

TEFC Motors suit general-purpose applications.

Rated at 208-230/460 V, 3-phase, 60 Hz, Elektrimax explosionproof and 56C NEMA AC Motors are equipped with vacuum pressure impregnated windings and oversized bearing on drive end. They are designed with rigid cast iron frame and Class F insulation with Class B rise. Featuring corrosion-resistant epoxy coating and IP55 protection rating, motors are EPACT Certified, C-CSA-US approved, and CE...

Read More »

All Topics