New 5-Phase PKP5 Stepper Motors Feature 1/4 in. Output Shaft

New 5-Phase PKP5 Stepper Motors Feature 1/4 in. Output Shaft

Oriental Motor’s 5-Phase PKP5 Stepper Motors are offered in 28 mm, 42 mm and 56.4 mm size mounting frame (NEMA 23). The motors are available with mini connector and encoder options for 42 mm, 56.4 mm and 60 mm frame size. Oriental’s CVD driver comes with advanced microstepping control, selectable step angle and microstepping filter control. The CVD drivers are offered with or without mounting...

Read More »
New 60 W Right-Angle Motor Comes with Hollow Shaft Right-Angle Hypoid JH Gearhead

New 60 W Right-Angle Motor Comes with Hollow Shaft Right-Angle Hypoid JH Gearhead

Oriental’s 60 W Right-Angle Motor is equipped with a brushless BL5 motor. Unit is offered with IP66 connector that provides protection and allows connection between motor and driver with two orientation of cable outlet direction. JH gearhead delivers a maximum rated torque of 15.6 N-m via stainless steel metric output shaft and an output speed ranging from 80 to 3600 r/min.

Read More »
Latest AlphaStep Stepper Motor Systems are Offered with Mechanical Absolute Sensor

Latest AlphaStep Stepper Motor Systems are Offered with Mechanical Absolute Sensor

AlphaStep Closed Loop Stepper Motor Systems are used in Hybrid control system that is designed for monitoring motor’s position. The motors are equipped with planetary and harmonic gearheads that are available with gear ratios of 7.2 and 10:1 and 50 and 100:1 respectively. Gearheads come with built-in controller or pulse input type driver that reduces the generation of heat. AZ series motors are...

Read More »
New Simotics XP Chemstar Motors are Suitable for Chemical and Petrochemical Industries

New Simotics XP Chemstar Motors are Suitable for Chemical and Petrochemical Industries

Siemens’ Simotics XP Chemstar Motors are available in 0.25 to 500 kW range and are suitable for applications such as pumps, compressors, fans, extruders, agitators and separators. Units come in grey cast iron enclosure and bearing plate and a steel fan cover. The motors are offered with freely selectable options such as reduced start-up current, motor monitoring, reinforced bearings or tropical...

Read More »
New StepSERVO Integrated Motors Feature Encoder Feedback and Advanced Control Loops

New StepSERVO Integrated Motors Feature Encoder Feedback and Advanced Control Loops

StepSERVO™ Integrated Motors consist of TSM, SSM and TXM series models. Units support operations on step and direction, streaming commands, fieldbus communications and stored Q programming. TSM series and TXM series motors come with 8 digital inputs, 4 digital outputs and 1 analog input whereas the SSM series with 3 digital inputs, 1 digital output and 1 analog input. These servomotors...

Read More »
New 30ECT EC Brushless Motors Feature Patented Ultra Coil Technology

New 30ECT EC Brushless Motors Feature Patented Ultra Coil Technology

Portescap’s 30ECT EC Brushless Motors are available in 30ECT64 and the 30ECT90 lengths with peak torque of up to 1.3 Nm and 2.4 Nm respectively. Units come with laser welded front flange, hall sensors and six coils for matching speed and voltage requirements. Motor’s patented high-speed rotor design allows speeds up to 30,000 rpm. Units are suitable for applications such as electric grippers,...

Read More »
Moticont's New Addition, LVCM-070-089-03, Features Higher Continuous and Peak Force

Moticont's New Addition, LVCM-070-089-03, Features Higher Continuous and Peak Force

Moticont's new compact, linear voice coil motor, LVCM-070-089-03, has a higher continuous force and a higher peak force. It can work as a DC servo motor and performs with high accuracy and repeatability to less than 1 micron when in a closed loop use. This linear motor can be used in different settings such as work holding and clamping, antenna positioning, laser machining and drilling, and...

Read More »
New Simotics XP Motors Meet IE3 Efficiency Ratings

New Simotics XP Motors Meet IE3 Efficiency Ratings

Simotics XP Motors are manufactured to protection ratings such as zone 1 in Ex db eb, Ex eb and zone 2 in Ex tb and zone 2 in Ex tc standards. Units are suitable for applications such as pumps, fans, compressors, extruders, mixers and agitators. Meeting IE3 standards, the Simotics XP motors reduces the operating costs. Motors are embedded with data matrix code that helps in storing individual...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics