New Laboratory and Research Supplies and Equipment Products

Mechanical Analyzer monitors viscoelastic materials.

DMA Q800 Dynamic Mechanical Analyzer makes mechanical stress/strain measurements at temperatures from -150 to 600 deg C. It has non-contact, linear motor for precise stress control, low-friction air bearings, and optical encoder for strain detection. Sample clamps are available for operation in cantilever, 3-point bend, shear, compression and tension modes of deformation. Submersion clamps also...

Power Quality Analyzer offers intelligent download.

PA-9Plus provides 12 megabytes of internal storage, on-board auxiliary power input capabilities, and optional removable flash memory card. Metrosoft AVO PA-9W software enables unit to trend imbalance, individual harmonics, THD and TDD, and preview and download only what is required. Chart analysis is simplified through zoom/unzoom capabilities. PA-9Plus complies with all applicable IEC, IEEE and...

Turning and Milling Inserts are PVD coated.

SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.

Lathe Mill serves as complete machining center.

Prazi Powerturn Powermill SD400-BF400 enables operator to perform turning, facing, milling and drilling applications. Lathe has V-way bed, spindle accuracy of 0.0002 in., and 9 spindle speeds from 170 to 3360 rpm. It is driven by 2/3 hp motor with 110V electrics. Head swivels 180Ã-

Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!

This white paper outlines the different types of screw head and drive designs.

Benchtop Machining Mill fits small and medium size tasks.

Prazi II PF7500 Series Model F1210E is available in 2, 3 and four axis CNC versions. Compact mill includes dovetail column with square ways for rigidity on 11 in. Z-axis. Mill head swivels 180 deg, while mill head spindle has infinitely variable speeds of 180-7500 rpm, 1.6 hp 220V air-cooled motor, and forward and reverse rotation with constant torque. Mill has 2.85 in. dia quill, MT2 spindle...

Milling Cutters offer consistent cutting edge.

Aerostell(R) 5182 VZ pocket milling cutters with SFZ grade inserts are designed for roughing aluminum and finishing aluminum, pH stainless steel, cast iron, and high temperature alloys. They offer extended tool life due to sub-micrograin carbide, and wear resistance due to insert hardness, ground surface finish and edge preparation.

Torque Analyzer offers RS-232 port for direct downloading.

TorqueMate Plus torque analyzer offers 5Vdc capability to interface with brushless rotary transducers. Software allows selection of 3 different Low-Pass filters, and identifies correct range of any smart-enabled transducers. Torque measurement includes lbs/ft, lbs/in., oz/in., and kg/m. When connected to transducer, accuracy exceeds +/- 0.25% full scale. Memory stores calibration for 15 different...

Compressor fills cylinders with oxygen and other gases.

Oil-free, compact RIX MicroBoost booster compressor fills gas cylinders with oxygen, nitrogen, air and other gases to 2,200 psig. 3-stage system allows user to draw supply cylinders down to 0 psig. Available in 110 and 230 V configurations, it weighs 40 lb, fits in 16 x 9 x 14 in. space, and produces 20 SCFH. Motor-driven booster does not rely on air or nitrogen for drive power, which can save...

Workstations incorporate HEPA filters.

Laminar Flow (Unidirectional) Workstations are available in horizontal, vertical, crossflow, and peripheral flow configurations. Their HEPA (High Efficiency Particulate Air) filters are rated 99.99% efficient on 0.3 microns or larger as defined by Federal Standard 209. Available models include 4003 Series Table Top Work Station and 4070 Fume Hoods. Models are suited for cleanroom, aerospace,...

Clean Room Struts are coated with epoxy.

Dura-Green(R) Coated Strut System meets or exceeds 100-level clean-room standards and Boeing (PCL) standards. Available in standard lengths of l0 and 20 ft, or in smaller, pre-cut lengths, struts are coated with protective, waterborne epoxy that is applied using nine-step cathodic electro-deposition process.

More performance and functionality for Sinumerik 828D CNC

Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.