Hand Held Drills

Hand Held Drills

Corded Drills deliver 0-2,500 rpm.

Available with mid-handle grip or traditional pistol grip, 3/8 in. Corded Drills enable professional contractors to complete heavy-duty applications. Model DWD115K features 8.0 A of power, while Models DWD110K and DWD112 offer 7.0 A. All-metal keyless ratcheting chuck on Models DWD115K and DWD112 optimize bit retention. All models weigh 4.1 lb and come with anti-slip comfort grip.

Read More »
Hand Held Drills

Drill performs light- to medium-duty drilling and driving.

Used for drilling holes and driving screws into wood or sheet metal, Â-¾ in. BE4010 has no-load speed of 2,850 rpm and employs 3.5 A motor that offers max tightening torque of 53 lb-in. Drilling capacity is 7/8 in. in soft wood with use of self-feed bits and 3/8 in. in mild steel. While 3/8 in. keyless chuck facilitates bit changing, 2.64 lb ergonomic design minimizes fatigue during extended...

Read More »
Hand Held Drills

Rugged P&H 250XP Drill Surpasses 1 Million Metre Mark

EAST KIMBERLY REGION, WESTERN AUSTRALIA - November 2007 - A diesel-hydraulic P&H 250XP hard rock production drill on September 25 surpassed 1 million metres of cumulative blast hole depth in service to a remote diamond mine operated by Argyle Diamonds Limited (ADL). Located in the rugged East Kimberley region of Western Australia and owned and operated by Rio Tinto Limited, the ADL mine is the...

Read More »
Hand Held Drills

Hammer Drill features die-cast aluminum gear housing.

Weighing 4.5 lb with 610 W motor, Model SBE610 offers fatigue-free operation when working with materials such as concrete, metal, wood, brick, and tile. Rated at 5 A, tool provides 6,200 impacts/min, 5 Nm of torque, and no-load speed of 3,100 rpm. Max drilling diameter is Â-½ in. in concrete, 3/8 in. in steel, and ¾ in. in soft wood. Exhaust routing feature circulates air downward...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Hand Held Drills

Jet Edge Exhibiting Cutting-Edge Waterjet Technology at FABTECH 2007 Booth #11086, November 11-14

(ST. MICHAEL, Minn. - September 12, 2007) - Jet Edge, Inc. will demonstrate its latest waterjet cutting technologies at the FABTECH International and AWS Welding Show, Nov. 11-14 at McCormick Place in Chicago. During this global manufacturing event, Jet Edge will showcase its versatile High Rail Gantry precision waterjet system, its iP60-50 ultra-high pressure intensifier pump and its new...

Read More »
Hand Held Drills

DeWalt Launches Its 28V Platform with NANO Technology

o innovative technology Offers LONGER life, LIGHTER WEIGHT, GREATER PERFORMANCE o Eight Tool System with NANO(TM) Technology Provides Professional Contractors with Extensive Line of 28V Tools to Complete Heavy-Duty Applications -- August 2007 - DeWALT, a leading manufacturer of industrial power tools, announced the launch of 28V tool system with NANO(TM) Technology. The eight-tools are powered by...

Read More »
Sub-Compact Driver has balanced, ergonomic design.
Hand Held Drills

Sub-Compact Driver has balanced, ergonomic design.

Able to drive 130, 3 in. screws on single charge, 2401-22 is powered via 1.4 Ah battery and leverages fade-free lithium-ion technology. One-handed chuck facilitates bit changing, and variable-speed (0-500 rpm) trigger provides control when working in small spaces or at awkward angles. Delivering 100 lb-in. of torque in 2 lb package, professional-grade 12 V tool is designed for ergonomic balance...

Read More »
Hand Held Drills

Compact Drill/Driver operates at up to 1,400 rpm.

Delivering 400 lb-in. torque with 1/16-Â-½ in. capacity, model 2601-22 is designed for electrical work, light assembly, installation, and finish carpentry. It features 2-speed magnesium gearbox, 22-position clutch setting, and ratcheting chuck, as well as built-in LED light and battery fuel gauge. At 4.0 lb, it includes 18 V 1.4 Ah Li-Ion manganese battery, 30 min charger, on-board bit...

Read More »
Hand Held Drills

Impact Drivers, Wrenches have compact, heavy-duty design.

Measuring .75 in. long to fit in tight areas and overhead applications, heavy-duty impact drivers and wrenches include 18 V (DC825KA/DC820KA), 14.4 V (DC835KA/DC830KA), 12 V (DC845KA/DC840KA, DC841), and 9.6 V (DC855KA). All utilize frameless motor with replaceable brushes and feature variable speed reversing switch, and LED work light. Additionally, tools incorporate OEM accessory recess...

Read More »
Jet Edge Exhibiting Cutting-Edge Waterjet Technology at CMTS 2007 Booth #3135, Oct. 15-18
Hand Held Drills

Jet Edge Exhibiting Cutting-Edge Waterjet Technology at CMTS 2007 Booth #3135, Oct. 15-18

(ST. MICHAEL, Minn. - August 2, 2007) - Jet Edge, Inc. will demonstrate its latest waterjet cutting technologies at the Canadian Manufacturing Technology Show (CMTS) Oct. 15-18 at the Direct Energy Centre in Toronto, Ontario. During this global manufacturing event, Jet Edge will showcase its versatile High Rail Gantry precision waterjet system, its iP60-50 ultra-high pressure intensifier pump and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers