Cordless Hammer Drill suits heavy-duty applications.
With torque ranges from 265-575 lb-in., SBP 18 Plus provides drill setting for rotation only as well as hammer drill setting for rotation with impact. Product runs on 18 V battery and features 2-speed gearbox, 5 torque settings, and Variospeed technology. Impuls system lets user drive screws as well as drill in metal and ceramic without center punching. With 1/2 in. keyless chuck, drill provides...
Read More »
Cordless Drill/Driver delivers up to 575 lb-in. torque.
Able to drill into wood, aluminum, and steel, BSP 18 Plus operates from 18 V battery at no-load speeds of 0-400 and 0-1,400 rpm in first and second gears respectively. Motor enables product to drill holes up to 2 in. dia in wood and Ã-½ in. dia in steel. Features include 2-speed gearbox, 20 torque settings, Ã-½ in. keyless chuck, and Variospeed technology. Impuls system lets users drive...
Read More »
Hammer Drill is portable and lightweight.
Cordless TE 2-A, 24 V Electropneumatic Hammer Drill performs rotary drilling, straight drilling, or setting screws when working on concrete, brick, and masonry. TE 2-A drills anchor holes in concrete from 3/16-3/8 in., and also provides capacity for drilling up to 1 in. holes in wood, 3/8 in. in steel, and up to 5/8 in. in concrete. Compact drill weighs 8.36 lb, and is offered with either 3.0...
Read More »
Cordless Drill/Driver features an oversized motor.
Suited for drilling, tapping, and driving screws, 12 V, variable speed BSP12 incorporates motor that generates low heat and optimal power. Impulse technology enables bit to find point of resistance and helps prevent drill bit from walking. Features include die cast aluminum gear housing, quick-release keyless chuck, and spindle stop system. It also offers forward/reverse feature, no-load speeds...
Read More »
There's More to Plating than You Zinc!
To find out more about the seven demands you should make of your zinc plater, download now.
Read More »
Hammer Drill features rotating brush plate.
Powered by 8.5 A motor, -½ in dual-torque Model 1199VSR performs at 0-1,100/3,000 rpm and 0-18,000/48,000 bpm. Rotating brush plate allows tool to offer equal power in forward and reverse for backing out bound-up bits. Drill features dual mode selector, rotation-only and hammer drill settings, and 2-speed gearbox for high-speed or high-torque applications. It offers capacities up to -¾ in. in...
Read More »
Drill combines 3/8 and 1/2 in. drilling in one tool.
Model BE710 incorporates 2-speed gearbox along with Variospeed full wave electronic speed control, which enables infinite variation in speed. Reversing feature provides full torque in reverse, while S-automatic safety clutch restricts reverse torque in case of bit jam. Features include winding protection grid, die cast aluminum housing, and auto-stop carbon brushes. Max tightening torque is 142...
Read More »
Cordless Driver/Drills have compact size.
Compact Series of 12 and 14.4 V Cordless Driver/Drills employ Clip-Lok(TM) System and feature single-sleeve, ratcheting chuck; 2-speed motor that operates from 0-400/0-1,400 rpm and produces 390 lb-in. torque (14.4 V model); and 20-position clutch. Suited for drilling and fastening, 12 V unit has 3/8 in. capacity chuck, while 14.4 V unit has Ã-½ in. capacity chuck. Reversible battery may be...
Read More »
Cordless Drills include Rapid Max(TM) twin charger.
Available in 12, 14.4, and 18 V models, X2 series -½ in. cordless drills are equipped with 2-speed transmission for rates of 400/1,600 rpm or 450/1,600 rpm. With max torque levels from 365-485 lb-in., drills have auxiliary handles for increased control and handling. They come with 2 Max HC(TM) high capacity battery packs, 24-position clutch, and single-sleeve locking chuck with carbide jaws and...
Read More »Cordless Hammer Drill comes with 30 min battery charger.
Model R841151 X2, 18 V, Ã-½ in., Rear Handle Hammer Drill has 2-speed transmission (0-400/0-1600 rpm) and gearbox that permits hammering ranges of 0-6,400/0-25,600 bpm. Its 24-position clutch regulates torque output up to 485 lb-in. Unit comes with 2 Max HC(TM) battery packs and Rapid Max Twin(TM) charger. Metal, 2-sleeve locking chuck has carbide jaws and metal depth stop rod. Also included:...
Read More »
Cordless Drills include 20-min Rapid Max Charger(TM).
Available in 12, 14.4, and 18 V models, 3/8 in. drills include 2 NiCad battery packs; die-cast, 24-position clutch ring; and self-ejecting battery pack feature. Products deliver torque from 350-460 lb-in. depending on model. Both 14.4 and 18 V models have 360Ã-
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
