Hand Held Drills

Portable Magnetic Drill has coolant bottle package.
Hand Held Drills

Portable Magnetic Drill has coolant bottle package.

Suited for repetitive hole drilling, HMD904 is offered with package that ensures adequate levels of coolant are continuously delivered to tool's cutting edge. Drill also incorporates LED indicator with circuitry that monitors critical magnet lift/shift sensor and switch, changing from green to red if unsafe condition exists. Powered by 7.2 A, 450 rpm motor, tool uses 12,000-Series...

Read More »
Festool USA Wins Two Industry Innovation Awards
Hand Held Drills

Festool USA Wins Two Industry Innovation Awards

TSC Cordless Track Saw and BHC Rotary Hammer Singled Out in Competitive 18V Categories Lebanon, IN – Festool USA has just won two Pro Tool Innovation Awards (PTIA) for the TSC 55 Cordless Track Saw and the BHC 18 Cordless Rotary Hammer. The TSC 55, which won the 18V cordless track saw category, is described as being the most versatile, precise cutting system available, and is able to cut...

Read More »
Magnetic Drilling Units are designed for heavy-duty applications.
Hand Held Drills

Magnetic Drilling Units are designed for heavy-duty applications.

Equipped with ACCUDRILL pressure indicator and material and thickness detector, ICECUT 100 (850 W, 600 rpm) and ICECUT 200 (300 and 600 rpm) promote safe and reliable use. ACCUDRILL safety amp meter in central control panel lets users optimize drilling operation productivity while preventing motor from overloading/overheating. Also included, material and thickness detector will not let drill...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Portable Magnetic Drill features automatic feed mechanism.
Hand Held Drills

Portable Magnetic Drill features automatic feed mechanism.

Suitable for production applications, MAB 825 V incorporates automatic feed mechanism with power retraction; double-insulated, 16 A, reversible motorÂ- with 4-speed oil bath gearbox; infinitely variable torque control; and full-wave electronics. Heavy-duty drill cuts holes up to 4 in. dia. in structural steel and other metals. Additional capabilities include twist drilling and...

Read More »
Hand Held Drills

JAC Products Using Flex Shaft Drills for Increased Roof Rail Production

Franklin, Georgia Tier One automotive supplier realizes up to 70% greater output from its internally designed production equipment, utilizing Suhner advanced drilling technology JAC Products (Franklin, Georgia) puts 30-40 million holes into approximately 6 million pieces of extruded and formed aluminum each year.Â-  The products made at this facility are used as roof rack rails on nearly...

Read More »
Portable Magnetic Drill facilitates positioning via swivel base.
Hand Held Drills

Portable Magnetic Drill facilitates positioning via swivel base.

When attached to workpiece with 8,000 lb holding force magnet, MAB 525 SB provides 20° movement left and right and 5/8 in.Â- forward and backward. Hole cutting capacity is up to 2 ½ in. dia in structural steel and other metals, and other capabilities include twist drilling up to 1 in. dia, tapping up to 15/16 in. dia, reaming up to 7/8 in. dia,...

Read More »
Hand Held Drills

Makita Rocks World of Concrete 2015

Makita delivers new tools, new accessories, and plenty of concrete for hands-on demonstrations La Mirada, CA – Over 50,000 concrete professionals converged on Las Vegas earlier this month for the World of Concrete trade show -- and Makita was ready with an array of new concrete tools and accessories, with hands-on demonstrations for attendees to feel the difference for themselves. Over 50,000...

Read More »
Portable Magnetic Drill features multi-axis positioning.
Hand Held Drills

Portable Magnetic Drill features multi-axis positioning.

Used for job site drilling, boring, and slotting applications, MAB 800 KTS features infinitely variable torque control, servo-assisted drilling, 10 in. stroke,Â- and full-wave electronics. Multi-axis positioning capability lets drill be adjusted up to 2 5/32 in. forward/backward and up to 4 ¾ in. left/right after magnet adheres to surface. In addition to...

Read More »
Portable Magnetic Drill can be converted to standard drill press.
Hand Held Drills

Portable Magnetic Drill can be converted to standard drill press.

Featuring 8.2 A motor andÂ- no-load speed of 450 rpm, MABasic 200 drills up to 1¼ in. dia, 5¾ in. depth with annular cutters in structural steel and other metals. This heavy-duty, single-speed, 14¼ in. tall, 27 lb tool accepts cutters with ¾ in. Weldon Shank. With optional chuck, product converts to...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers