Auto Drills feature strokes to 9 in.
Based on pneumatic feed and mechanical rotation designs, long stroke Models 2090 and 2190 enable multi-wall drilling operations to be done from one side. Units are heavily constructed and rated for continuous duty. Majority of parts, including recommended spare parts, are same as 2 and 4 in. stroke drill units. In addition to drilling applications, units are suited for material work, inspection,...
Read More »Cordless Drill/Driver fits in tight spaces.
Equipped with 4.8 V battery that drives up to 95 No. 10 x 1 in. screws on one charge, PowerMaxx can drill up to 1/8 in. in steel and Ã-¼ in. in soft wood. Two-speed gearbox and soft-start motor deliver no-load speed of 0-200 rpm in screw mode and 0-600 rpm in drill mode. Maximum torque is 80 lb-in. Switch is designed for right- and left-handed operation, and forward/reverse lever can be...
Read More »Hammer Drills offer selectable forward/reverse operation.
Designed with optimized balance, Ã-½ in. hammer-drills utilize 8.5 A motor and feature metal gear case, soft grip handles that reduce vibration, and recessed selector for hammering or rotation modes. Optimized for concrete fastening, single-speed 5381 operates from 0-1,800 rpm and 0-28,000 bpm and comes with 10 ft fixed cord. Model 5387 offers dual speed/torque of 0-1,000 rpm and 0-16,000 bpm...
Read More »Cordless Tool Kit has 2-bay charger for optimal uptime.
Featuring 2 BLUECORE(TM) batteries, CPK40-18 is 18 V, 4-piece combo kit with 30 min dual-bay charger. Brute-Tough(TM) hammer drill/driver has carbide teeth and hammer on/off ring. Operating at speeds to 3,600 rpm, 6Ã-½ in. cordless circular saw features 50Ã-
Read More »
The Real Cost of Falls and Other Workplace Injuries
When it comes to workplace falls and accidents: inattention to problematic situations and the lack of an appropriate safety plan will cost you on multiple fronts. Our guide covers all the areas of concern to make sure you're protected against risk.
Read More »
Portable Magnetic Drill offers power feed option.
Model HMD925 uses RotabroachÃ-® tools and power feed option to produce holes from 7/16-1Ã-¼ in. dia in materials up to 2 in. thick. Max capacity using manual feed operation is 1Ã-½ in. dia. All operational controls are located on feed handle side of unit, and solid-state circuitry monitors and adjusts self-feed action throughout entire length of cut. Magnetic base develops 1,742 lb...
Read More »Cordless Driver Drills weigh less than 4.5 lb.
Models DS18DVF3, DS14DVF3, and DS12DVF3 are 18, 14.4, and 12 V cordless power drills with 2-piece magnet motors delivering 400, 300, and 230 lb-in. torque, respectively. Two-speed transmission controlled by 1-touch speed shift knob allows user to select between 0-400 or 0-1,200 rpm on DS18DVF3 and DS14DVF3 models and 0-350 or 0-1,050 rpm on Model DS12DVF3. Measuring just over 7.5 in., units...
Read More »Cordless Hammer Drills power through many materials.
Powered by 2-piece rare-earth magnet motor and motor cooling system, tools can drill, drive, and hammer into wood, plastic, steel, aluminum, brick, and concrete block. Two 3.0 Ah NiMH batteries power DV18DMR 18 V drill to deliver 550 lb-in. of torque. DV14DMR 14 V delivers 460 lb-in. of torque with two 2.0 Ah NiCD batteries. Drills offer 2-speed transmission, no-load rpm, Ã-½ in. industrial...
Read More »
Cordless Drills feature 3-speed transmission.
Series MXT(TM) consists of 18 Vdc Models 8444DWDE and 6349DWDE, and 14.4 Vdc Model 6339DWDE. Units include all-metal gear transmission for light, heavy-duty, and extreme applications. Shift-Lock(TM) drive system locks out clutch with one touch and shifts from drill to driver mode. Two-piece D-21 motor uses rare earth magnet, and armature is supported with dual-sealed ball bearings. Operating on...
Read More »
Cordless Drill/Driver recharges in 30 minutes.
Suited for drilling, tapping, and driving screws, BSZ 14.4 is equipped with 20 torque settings in addition to drill setting with forward and reverse modes. It incorporates 2-speed gearbox, keyless Ã-½ in. chuck, and ergonomic, rubber-coated T-handle. Product, driven by 14.4 V motor that produces up to 487 lb-in. torque and infinite no-load speeds to 1,400 rpm, can drill up to Ã-½ in....
Read More »
Rotary Hammer combines hammer drilling and chiseling.
Featuring 9.6 A motor, Model KHE 55 offers no-load speeds of 135-275 rpm and 1.300-2,600 bpm. Vario-Tacho-Constamatic electronic speed control enables tool to maintain virtually constant speed between load and no-load. Hammer offers rotational torque of 531 lb-in. and variable impact energy from 1.0-9.0 joules per blow. Drilling range is from Ã-½-1Ã-½ in. with maximum capacity in concrete...
Read More »
Come Alive Organics' Premium Organic Agave Provides a Healthier Choice
Come Alive Organics distributes all-natural, proprietary flavored agave for the food and beverage industry while helping children across the globe. Learn more about our agave products and our one sweet cause in this video and two-page PDF.
Read More »
