Rotating Basket Parts Washers can handle delicate parts.
Utilizing continually filtered and recirculated cleaning solutions, cellular Lean Clean 360 series cleans parts in rotating baskets with environmentally safe, aqueous cleaning solutions. Combined Spray, Immersion, and Spray-Under-Immersion action removes chips, oils, and coolants; ultrasonics are available for precision cleaning applications. Delicate parts that cannot be rotated can be gently...
Read More »
Industrial Wet/Dry Vacuums
Mi-T-MÃ-® Corporation manufactures two Industrial Wet/Dry Vacuums, a 13-Gallon (MV-1300-0MEV) and a 18-Gallon (MV-1800-0MEV). These vacuums are CSA listed. The MV-1300-0MEV offers a 1.3 H.P. continuous motor, 6.9 amperage, 115 CFM, a water recovery of 9.0 Gallons and a waterlift of 93 . The MV-1800-0MEV offers a 1.6 H.P. continuous motor, 8.3 amperage, 120 CFM, a water recovery of 13.0...
Read More »
Wipes pick up toxic heavy metals.
Designed to promote RoHS-compliance, Lead Eliminator uses chelating agents and other ingredients to lift and remove lead and heavy metals from surfaces such as Formica, stainless steel, aluminum, and Lexan. Low-toxicity product is available in 1-pint spray bottles or 6 x 9 in. saturated wipes with one abrasive side and one smooth side. Dual-action remediation wipes and sprays effectively remove...
Read More »Dust Mop System picks up trash and dirt in one sweep.
Available in 24 and 48 in. cleaning paths, DuoClean consists of dust pan with dust mop head attached to bottom. Pan's beveled edge picks up large debris, while synthetic, non-woven dust cloth captures dirt particles. Attached utility broom eliminates need for squatting and helps sweep up large debris. Durable enough to clean 20,000 ftÃ-², disposable dust-mop head helps maintain floor finish...
Read More »
6 Reasons to Consider Hydroforming over Traditional Metal Stamping
To learn more about the functions of the hydroforming process, the key differences from other processes, and why it is preferable over other stamping options, download this eBook now.
Read More »
Tornado Industries Keeps Getting Approved
Four more product groups manufactured by Tornado Industries have received the Approved Equipment designation from Tandus, a leading manufacturer of commercial floor coverings. The Approved Equipment label means the products have been put through some of the most stringent tests in the cleaning industry-and passed or surpassed the testing criteria. The four product groups are:o CW 50/CW 100 Vacuum...
Read More »Wipers suit cleanroom environments.
Made of 100% continuous filament, double-knit polyester, Kimtech Pure CL3 Wipers absorb liquids on contact and are solvent and abrasion resistant. They have 4 laser-sealed edges to minimize particle generation, and are cleanroom laundered in water filtered to 0.2 micron. Kimtech Pure CL3 Sterile Polyester Wipers are compliant with AAMI Guidelines and gamma irradiated to 10-6 Sterility Assurance...
Read More »Wipers suit cleanroom environments.
Available in dry, pre-saturated, and sterile versions, Kimtech PureÃ-® wipers suit semiconductor, pharmaceutical, high-tech, biotech, and medical devices industries. Kimtech PureÃ-® CL3 wipers are made of 100% continuous filament double-knit polyester that absorbs liquids on contact while delivering low particle and extractable levels. With 4 laser-sealed edges, dry Kimtech PureÃ-®...
Read More »CWC Series Units
Mi-T-M-® Corporation manufactures the CWC Series cold water belt drive pressure washer line. Made for the commercial industrial market, the CWC Series produces 4000-6000 PSI @ 3.7-5.0 GPM and is powered by a 16 H.P. Vanguard OHV or a 20 or 24 H.P. Honda OHV engine, featuring either an AR or General pump. Standard features on the CWC Series include triplex ceramic plunger pump with forged brass...
Read More »Low Profile FLX-P(TM) Static Control Brush Patent Recognized by Prestigious ITW Patent Society
MECHANIC FALLS, Maine, March 7 -- Electro Static Technology-ITW, manufacturer of the patented FLX-P(TM) Static Dissipative Brushes and patent pending AEGIS SGR(TM) shaft grounding ring is pleased to announce that H. William Oh and Jeffrey Richardson will be inducted into the ITW Patent Society on April 17, 2006. The Low Profile FLX-P(TM) static dissipative brush, the invention for which Mr. Oh...
Read More »
Roller Conveyor System provides abrasive blasting.
Designed for in-line surface preparation of long profiles, rod, bar, and tube materials, Model RC-800 can be used with variety of grit, shot, and bead media to produce different surface textures or finishes. Powered rubber rollers at entry and exit sides of blast cabinet grasp work and steadily feed it at controlled and adjustable speed. Inside finishing enclosure, up to 8 suction-blast guns are...
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
