New Cells Products

Load Cell provides one-button operation.

Self-contained, digital-display AutoCell is available for capacities from 2,000 lb to 2,000 tons. With no wires or cables to attach, unit performs press calibrations and tonnage readouts by pressing start button after being placed inside machine. It automatically shuts off after 5 minutes of being idle. AutoCell works on mechanical, hydraulic, and powdered-metal presses.

Level Measurement System provides accuracy to 1.0%.

Load cell based system combines EconoMount(TM) Load Cell Modules with PS-2010W Transmitters, resulting in non-intrusive method level measurement. Non-penetrating measurement system eliminates risk of product contamination while providing accurate, repeatable readings. Level measurement system requires live load cell modules at 1 or 2 measurement points. Remaining points are supported by simulated...

Load Cells offer single- and three-axis load measurement.

Series 6244 crash barrier load cells utilize strain-gage sensing technology in multi-column design. They satisfy measurement requirements for Frontal, Lateral, Moveable, and Stationary crash tests. Units feature low weight, high stiffness, high ringing frequency, low cross talk, and ability to withstand high extraneous loads. Variety of full-scale ranges and configurations are available.

Load Cell offers capacities from 100 g to 50 kg.

Universal, S-type S610 Micro-S Cell has stainless steel sensor and is intended for operations requiring very small size and/or low mass. Unit includes flat compression mode fitting for compression loading and #4-40 threaded holes for tension loading. Strain relief for cable is provided by stainless steel spring. Thin-film strain gauge technology provides less than 1% per year drift, as well as...

Advantages of Thermoset Plastics vs. Engineered Thermoplastics and Metal Parts

Thermosets and engineered thermoplastics are sometimes better suited to differing situations, but they do have some overlap in relevant use cases.

In-Line Load Cell works in compression and tension.

Fully welded and hermetically sealed Model RG has 50% overload capacity rating. Unit exhibits only .003 in. FS deflection and suits applications where side loading cannot be completely controlled. It is available for ranges from 2,000 to 50,000 lb and can be configured with integral male and/or female threads. Excitation up to 15 Vdc or Vac is acceptable and standard output is 2 mV/V. Combined...

Load Cell suits limited space applications.

Single-point Model S215 Ultramini(TM) measures full-scale forces of 2, 4, and 12 lb. It can be used with rigidly mounted platform or to measure tensile or compressive forces. Threaded holes allow bottom mounting, lowering height of scale assembly to 0.22 in. Unit features 0.01% non-repeatability and 200% overload. It is useful for scales, laboratory use, force measurement, robotics, and general...

Load Cell Option provides 4 to 20 mA output signal.

Company's entire line of general purpose and fatigue rated load cells are available with optional signal-conditioning circuitry to provide 4-20 mA output and current mode, 2 wire, loop powered operation from any unregulated, 8 to 36 Vdc power supply. Additional signal conditioners are not required. Advantages include improved signal-to-noise ratio, ability to transmit signals over long distances,...

Load Cell Weighing Kit suits clean room operations.

Model M1015HPWS high-purity weighing system (HPWS) is installed on existing mixers, containers, or tables to provide intrinsically safe scales for ultra-pure measurements up to 20,000 lbs. Solid-state, hermetically sealed design offers 300% overload rating. Stainless steel FM approved and nitrogen filled housing (Samiary 3A rated) is fully sealed and self-contained. Unit is self-leveling with...

Load Cell suits limited space applications.

MLP Series measures 0.750 x 1.625 x 0.625 in. for all capacity ranges, including 10, 25, 50, 75, 100, 150, 200, 300, 500, 750 and 1000 lbs full-scale. Load cell is designed for tension and compression applications. Combined error of hysteresis and non-linearity is less than 0.1% FS, and non-repeatability is .05% FS. Output is 2 mV/V nominal via full wheatstone strain gage bridge. Load cell is...

Load Cell is designed for low creep.

Model 48 pancake style load cells are traceable to NIST, making them suitable for use in metrology lab and as reference standard for calibrating other load cells. Tension/compression devices have accuracy to 0.02% in ranges from 250-100,000 lb. Options include 4-20 mA or Ã-

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.