New Cells Products

Solar Energy Cell produces 200 W of power.

Designed for commercial solar applications, 200 W solar module uses polycrystalline cells and is UL 1703-certified as well as California Energy Commission (CEC)-listed. Design facilitates installation process by reducing amount of racking and labor associated with solar array installation.

Load Cell facilitates brake testing.

Designed with 3 in. diameter flat loading surface, Brake Pedal Load Cell measures force where direction of load changes. Set of tapped holes on underside and mounting bracket allow it to be firmly attached to pedal. Load cell gives same output, Ã-

Fuel Cell Cartridge powers laptop computers.

Plastic-based Methanol Fuel Cartridge provides energy source for portable electronic devices powered by direct methanol fuel cells. Cells may be instantaneously recharged by replacing disposable fuel cartridge. Cartridge containing 50 cmÃ-³ of methanol can power laptop for 5 or more hours compared to 10 minutes using alkaline battery.

Solar Cell extends battery life by up to 2 years.

Intended for outdoor gate applications, Model SCP 44 provides 9 Vdc power source to thru beam photoelectric sensors and enables direct connection between cell and signal emitter though one 6 m cable. Cell makes it unnecessary to install moving cable for sensitive edge and replaces photocells that are normally mounted in internal part of automatic gate.

Hemp: An Eco-friendly Substitute for Cotton and Petroleum-based Synthetics

To learn more about hemp's history, composition, performance, and its sustainability and cost, download this white paper now.

Load Cells come in miniature and subminiature models.

Available in tension and compression models, load cells cover capacities from 50 g to 10,000 lb and come in sizes as small as 0.13 in. high x Ã-½ in. dia. Units may be incorporated into existing machines and are suited for space-restricted areas. Featuring all-welded construction, products are available with accuracies to 0.1% and have operating temperature range of -65 to +250Ã-

Capacitive Load Sensors measure up to 250 lb.

Housed in 2 x 2 x 0.4 in. package with integrated electronics, Series M870 comes in 10, 50, and 250 lb capacities. By supplying 5 Vdc input to sensors, users can read 0-5 Vdc output with voltmeter or feed it into data acquisition or control systems. Sensors offer 2,000-4,000 mV of output change from baseline to full load with noise of Ã-

Sample Cell is designed for LA-ICP-MS applications.

Used to provides aerosol washout and transient signal analysis, SuperCell(TM) features 18.5 cmÃ-² work area that accommodates multiple samples and standards simultaneously. When analyzing single-pulse, transient signals, design reduces aerosol dispersion, compressing and amplifying analytical information. For steady-state acquisitions, when sample is continuously ablated, unit displays...

Photoconductive Cells detect visible and natural light.

Resin-coated GL-series detects visible and natural light. Offered with light resistance from 3-200 kohm and dimensions from 4.0-20 mm, products can also be made to user requirements. Applications include electronic shutters and strobes for cameras, clocks, and switching for lighting.

Load Cell provides weighing capabilities from 50-5000 kg.

Series 600 Tedea-Huntleigh S-type load cells include nickel-coated alloy steel and stainless steel variants. Models 615 and 616 suit harsh environments and frequent wash-down, and are sealed to IP66. Models 619 and 620 are rated to IP67 and IP68, respectively. Model 614, with aluminum body, is OIML-approved to 3000 divisions from 50-500 kg and is rated to IP65. Models 615 and 616 have 4/6-wire...

Load Cell offers nominal accuracy of -

Tedea Huntleigh 3520 Shear Beam Load Cells suit low-profile floor scales and pallet scales. The 19 mm high load cells are constructed from stainless steel, making them easy to clean and corrosion resistant. Units are fully sealed to meet IP67 standards. High thermostability ensures accuracy throughout wide temperature fluctuations. Six-wire cable, with 2 sensing wires, eliminates measurement...

ISO-Certified Precision Machining and Contract Manufacturing Services from DFF

DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.