New DriTac SprayTac 2500 SG, 2600 LVT-CT and 2700 VCT Green Spray Adhesives Available in Convenient Portable 22 oz. Aerosol Cans
Requires less adhesive that allows immediate traffic and is easy to clean up when wet. High moisture (up to 8 lbs. and 95% RH) and pH resistant water-based adhesives provide eco-friendly, efficient and problem-solving advantages. Ideal for the installation of approved sheet goods (SG), luxury vinyl tile/plank, carpet tile (LVT-CT) and vinyl composition tile (VCT).
Read More »
DowDuPont's New Patient-friendly DOW CORNING MG 7-1020 Maintains its Adhesive Strength Even at Lower Coat Weights
Adhesive is based on advanced silicone technology and suitable for wearable monitoring devices, medical tapes and attachments. Delivers strong adhesion, extended wear as well as design and manufacturing flexibility. Plays an important role in the usability and efficacy of wearable technologies and drug delivery devices.
Read More »
Akron Ascent Innovations Announces Dry Adhesives Produced Using an Electro-spinning Process
Consists of millions of solid, sub-micron-diameter nanofibers with nearly zero tackiness and low peel force. Can be laminated to a range of face stocks including printable papers, polymer films and applied to a range of surfaces – painted walls, doors and mirrors. Easy to apply, displays no bubbles, and is suitable for short- and long-term applications.
Read More »
New LED405Med LED Curable Adhesive Meets ISO 10993-5 Cytotoxicity Standards
The LED405Med LED Curable Adhesive exhibits a thermal expansion of 35-40 in/in x 10^-6/°C and cures to a hardness of 65-75 Shore D. The product features a refractive index of 1.50, volume resistivity of more than 10^14 ohm-cm and dielectric constant of 4.2 at 60 Hz. The adhesive is used in -60°F to +250°F temperature range and cures upon exposure to a 405 nm wavelength light source. It is used...
Read More »
AGC to Expand Production of Fluon+ EA-2000 Resin Used in High-Frequency Printed Circuit Boards
Exton, Pa., January 22, 2019 – AGC is significantly expanding its production capacity of Fluon+ EA-2000 fluorinated resin by establishing a new facility at its plant in Chiba, Japan. Fluon+EA-2000 is primarily used as a material for 5G high-speed, high-frequency printed circuit boards, which will see a sharp increase in demand as 5G network technology becomes widely available by 2020....
Read More »
New Cushion Grip Denture Adhesive is Zinc-Free and Non-Toxic
The Cushion Grip™ Thermoplastic Denture Adhesive is offered in 1 oz tube and is manufactured from thermoplastic polymers that are heat activated and 100% waterproof. The product on one application can hold dentures for up to 4 days.
Read More »
Master Bond Offers MasterSil 980 Fluorosilicone with a Dielectric Constant of 6.4
The MasterSil 980 Two Part Fluorosilicone is suitable for high performance bonding, sealing, coating and potting applications. The product features an elongation of 100-200% at 75°F and provides an operating temperature of -85°F to +465°F. The adhesive bonds with metals, composites, ceramics, glass, rubbers, plastics and silicones and has a volume resistivity of more than 10^14 ohm-cm. It can...
Read More »
Creative Materials Introduces 127-30HV Silicone Adhesive for Coating, Printing, Fastening and Bonding Applications
Creative Materials has introduced the new 127-30HV silicone adhesive. It is a flexible, re-workable, electrically conductive silicone-based adhesive, ink, and coating. It balances adhesion, cohesion, printability and high-temperature performance for coating, printing, fastening and bonding applications. 127-30HV is suitable for high reliability interconnects stretchable conductive features,...
Read More »
Permatex Offers ScrewGlue Repair Gel That Uses Non-Drip Clinging Formula
The ScrewGlue Repair Gel is used for fixing damaged and stripped screws and threaded holes in household items. The clinging formula of the gel makes it suitable for use overhead and hard-to-reach places. The gel helps in preventing screws and bolts from future loosening caused due to vibration, frequent use, thread corrosion and exposure to the elements. The product is used for repairing cabinet...
Read More »
New UV26 UV Curable Adhesive Features a Refractive Index of 1.55 at Room Temperature
The Master Bond’s UV26 UV Curable Adhesive has a glass transition temperature (Tg) ranging from 160 to 170°C. The compound is suitable for use on substrates such as glass, surface treated metals and plastics. The product can cure compounds of viscosity ranging from 250-1,500 cps when exposed to UV light source at a wavelength of 320-365 nm. It can withstand chemicals such as acids, bases,...
Read More »
DoorKing's 1601 Lane Barrier Provides a Higher Level of Traffic Control for Less
DoorKing is proud to introduce an easy add-on to its 1601 Barrier Gate Operator: The 1601 Traffic Lane Barrier. The barrier gate provides greater traffic control while eliminating the need for bollards or crash beams. Check out this video to learn more.
Read More »
