Adhesives

Engineered Material Systems to Showcase Adhesives for Stringing and Shingling Next-Generation Solar Modules at Intersolar North America
Adhesives

Engineered Material Systems to Showcase Adhesives for Stringing and Shingling Next-Generation Solar Modules at Intersolar North America

DELAWARE, OH - July 2016 - Engineered Material Systems, Inc. (EMS), a leading global supplier of conductive interconnect materials for photovoltaic applications, will exhibit its new 561-400 series Low-Cost Snap Cure Conductive Adhesives at Intersolar North America, scheduled to take place July 12-14 in San Francisco, CA. The 561-400 series is designed for stringing and shingling crystalline...

Read More »
Epoxy Adhesives target pipeline coatings.
Resins

Epoxy Adhesives target pipeline coatings.

Designed for repairing high pressure pipelines, KALFIX 911 and KALFIX 913 are pressure transfer fillers offering extreme adhesion, even to underwater surfaces. For pipeline coating or cold weather use, KALFIX 563 epoxy and curing agent is able to displace water for permanent bond to all substrates with minimal substrate preparation. KALFIX 206, combining liquid epoxy resin and high temperature...

Read More »
Coatings

SEMICON WEST 2016 is 2 Weeks Away, Visit YINCAE Booth 6448

Albany, NYÂ- – The SEMICON West 2016, North America’s premier Microelectronics event is less than two weeks away! SEMICON West 2016 will be held at the Moscone Center in San Francisco, CA from July 12th to 14th. We sincerely invite you to stop by our Booth 6448 to learn more about YINCAE Advanced Materials.  YINCAE offers a variety of exclusive Adhesives, Thermal Interface, and...

Read More »
Adhesives

Temporary Bonding Adhesive aids thin wafer handling.

High temperature wafer processing adhesives (WPA) withstand processing up to 330°C and exhibit chemical resistance to acids and bases during etching processes. Thermal and chemical stability promotes continued chemical integrity, allowing thin wafer to be separated from wafer handler/carrier by heat-sliding or laser de-bonding equipment. Facilitating separation, WPA adhesive layer absorbs...

Read More »
Epoxies

Nanosilica Filled, Dual Cure Adhesive Meets NASA Low Outgassing Specifications

Master Bond UV22DC80 is a one component, low viscosity, nanosilica filled epoxy based system for bonding, sealing and coating with the ability to cure under UV light and/or with heat. The UV portion of the cure can be achieved in seconds upon exposure to a UV light at 365 nm with 20-40 milliwatts/cm2 of energy. This type of formulation allows for polymerization in “shadowed out” areas with...

Read More »
Adhesives

Acrylic Emulsion PSAs target permanent, removable applications.

As coater-ready adhesive for permanent applications,Â-  Aroset™ APS 1295 adheres to various surfaces, resists water, and forms bond at temperatures down to -20°C. Cohesion properties suit tapes in building/construction, house wrap splice, and industrial assembly. Designed for temporary applications, Aroset 2570 allows tapes, films, and paper-based materials to be...

Read More »
Molding Machinery

Ellsworth Adhesives to Display the Latest in Adhesive Technologies at Sensors Expo

GERMANTOWN, WI – Ellsworth Adhesives, a global distributor of adhesives, specialty chemicals and dispensing equipment, is pleased to announce that they will be exhibiting at this year’s Sensor’s Expo at the McEnery Convention Center in San Jose, California June 22-23 in booth 1217. This year at Sensors Expo, Ellsworth Adhesives is partnering with Moldman™ Systems, a manufacturer of low...

Read More »
Dymax Light-Curable Adhesives Formulated with Encompass(TM) Technology to be Showcased at MD&M East
Adhesives

Dymax Light-Curable Adhesives Formulated with Encompass(TM) Technology to be Showcased at MD&M East

Torrington, Connecticut – Dymax Corporation, a leading supplier of adhesives to the disposable medical device industry, will exhibit in Booth #839 at MDM East, scheduled to take place June 14-16, 2016 at the Jacob Javits Center in New York. Their newest products and technologies – including solvent free, USP Class VI, and ISO 10993 biocompatible light-curable adhesives formulated with new...

Read More »
Adhesives

Silicone-Free Wound Care Adhesives do not damage fragile skin.

DuploMED Soft-Stick™ Series enables manufacturers to create wound care products that can be applied, repositioned, and removed without causing patient pain or risk damaging their fragile skin. Featuring gamma-sterilization stable, gel-like PSAs, this series is permeable to water vapor, painless, and residue-free. Properties enable dressings can be contoured to wound and sealed around edges.

Read More »
Pressure Sensitive Adhesive is odorless and waterproof.
Adhesives

Pressure Sensitive Adhesive is odorless and waterproof.

Intended for flooring industry, one-part Aquaflex² PSA is non-flammable, non-hazardous, and zero VOC. User trowels over prepared concrete, allows 30 minutes of flash for tack development, installs tile, presses to activate bond, and rolls floor. Flooring can be installed up to 2 hours after trowel. By eliminating need for shot-blasting, bio-based adhesive enables compliance with OSHA final...

Read More »

All Topics