Adhesives

High Temperature Resistant, Optically Clear, Two Part Epoxy Meets NASA Low Outgassing Requirements
Epoxies

High Temperature Resistant, Optically Clear, Two Part Epoxy Meets NASA Low Outgassing Requirements

Widely used for applications in the aerospace, electronic and OEM industries, Master Bond EP121CL-LO is a high performance epoxy that passes ASTM E595 testing for NASA low outgassing specifications. This two component system has a low mixed viscosity of 1,000-3,000 cps with a mix ratio of 100:80 by weight. It features an exceptionally long open time of at least 2-3 days at room temperature in a...

Read More »
Conductive Adhesive is used for stringing solar modules.
Photovoltaic Equipment

Conductive Adhesive is used for stringing solar modules.

Intended for stringing applications in crystalline silicon and thin-film solar modules, EMS 561-403 Snap Cure Conductive Adhesive is designed to electrically interconnect solar cells using ribbons. Stress-absorbing adhesive withstands thermal cycling effects and exhibits conductive stability to cell and ribbon metallization during damp heat exposure. Ability to cure within seconds at 180°C or...

Read More »
Tubes and Tubing

Fabrico Medical to Exhibit Advanced Medical Converting Capabilities at the American Association for Clinical Chemistry Conference

Rochester, NY - Fabrico Medical, a premier provider of converted materials and advanced assembly for the design-to-manufacture of medical devices and disposables, announces its participation in the American Association for Clinical Chemistry (AACC) Conference, Booth #4646, July 28 – 30, 2015, at Georgia World Congress Center in Atlanta, GA. The AACC Conference is the world's largest lab...

Read More »
Structural Bonding Epoxy has high-strength, one-part formula.
Epoxies

Structural Bonding Epoxy has high-strength, one-part formula.

Suited for aerospace and specialty OEM industries, Master Bond® EP13SPND-2 offersÂ- respective tensile lap shear strength, compressive strength, and tensile modulus of over 3,000 psi, 18,000 psi, and 500,000–550,000 psi. Single-component nature aids handling and does not require mixing prior to use. Serviceable from -60 to +500°F, chemical-resistant and dimensionally stable...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Silicone Pressurized Tubes let users control bead width.
Silicone

Silicone Pressurized Tubes let users control bead width.

Designed for sealing, bonding, protecting, and waterproofing, RTV Silicone Pressurized Tubes with Select-A-Bead™ Nozzle have double piston pressurized package that allows for smooth, uniform dispensing and self-sealing plug that keeps silicone fresh. Product cures at room temperature so no special curing method is required. Available in 5 colors, chemically stable formulation shows little...

Read More »
Adhesives

MBK Discusses Wearable Technology Designs: Presented by Jason Zajac at University of San Francisco/UC Berkeley

MBK Tape Solutions Chatsworth, CA Jason Zajac, Vice President of Sales for MBK Tape Solutions, presented to the University of San Francisco/ UC Berkeley, Master of Transitional Medicine (MTM) team about the latest stick to skin adhesives they engineer as well as the multi-layer lamination methods MBK has pioneered for mounting medical devices to the body. "It is amazing the people I meet and the...

Read More »
One Component, Neutral Curing Silicone Passes USP Class VI and ISO 10993-5 Tests
Adhesives

One Component, Neutral Curing Silicone Passes USP Class VI and ISO 10993-5 Tests

Specially formulated for medical device applications, Master Bond MasterSil 912Med is a room temperature vulcanizing silicone system for high performance bonding, sealing and coating. This system meets both USP biocompatibility and ISO cytotoxicity standards and resists a variety of sterilization techniques such as gamma radiation, EtO and some types of liquid sterilants. This one part system has...

Read More »
Conductive Adhesive suits general assembly applications.
Adhesives

Conductive Adhesive suits general assembly applications.

Designed to cure in 24 hours at room temperature or rapidly at elevated temperatures, 2-part EMS 618-15 Conductive Adhesive has 10:1 mix ratio and is available in 2-syringe packaging system for use with static mix heads. Product forms high strength, high reliability conductive interconnects in circuit assembly applications.

Read More »
Tubes and Tubing

Fabrico Medical to Exhibit Advanced Medical Fabrication Capabilities at the 2015 MD&M East Show

Rochester, NYÂ- - Fabrico Medical, a provider of custom manufacturing services and converter of thin flexible materials for the design-to-manufacture of medical devices and disposables, announces its participation in the 2015 MDM East Show, Booth #743, June 9-11, 2015, at Jacob K. Javits Convention Center, New York, NY. Fabrico Medical is also pleased announce that they will be exhibiting...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers